Difference between revisions of "Master Control Panel"

From ISXOgre\Aion
Jump to: navigation, search
(→‎Master Control Panel)
Line 1: Line 1:
 
=Master Control Panel=
 
=Master Control Panel=
 
[[Image:OgreAion MCP.png]]
 
[[Image:OgreAion MCP.png]]
 +
==Command List==
 +
<Set Name="LetsGo">
 +
<Set Name="Code">
 +
<Setting Name="One">relay all oc !mcp -letsgo ${Parameter1}</Setting>
 +
</Set>
 +
<Set Name="Description">
 +
      <Setting Name="One">This button removes movement restrictions such as HoldUp and campspot.</Setting>
 +
      <Setting Name="Two">Parameter1 = Command for who? Example: All</Setting>
 +
</Set>
 +
</Set>
 +
<Set Name="HoldUp">
 +
<Set Name="Code">
 +
<Setting Name="One">relay all oc !mcp -holdup ${Parameter1}</Setting>
 +
</Set>
 +
<Set Name="Description">
 +
      <Setting Name="One">This button turns auto follow off.</Setting>
 +
      <Setting Name="Two">Parameter1 = Command for who? Example: All</Setting>
 +
</Set>
 +
</Set>
 +
  <Set Name="Pause">
 +
    <Set Name="Code">
 +
      <Setting Name="One">relay all oc !mcp -pause ${Parameter1}</Setting>
 +
    </Set>
 +
    <Set Name="Description">
 +
      <Setting Name="One">Pauses bots.</Setting>
 +
      <Setting Name="Two">Parameter1 = Command for who? Example: All</Setting>
 +
    </Set>
 +
  </Set>
 +
  <Set Name="Resume">
 +
    <Set Name="Code">
 +
      <Setting Name="One">relay all oc !mcp -unpause ${Parameter1}</Setting>
 +
    </Set>
 +
    <Set Name="Description">
 +
      <Setting Name="One">Unpauses bots.</Setting>
 +
      <Setting Name="Two">Parameter1 = Command for who? Example: All</Setting>
 +
    </Set>
 +
  </Set>
 +
  <Set Name="Resume">
 +
    <Set Name="Code">
 +
      <Setting Name="One">relay all oc !mcp -unpause ${Parameter1}</Setting>
 +
    </Set>
 +
    <Set Name="Description">
 +
      <Setting Name="One">Unpauses bots.</Setting>
 +
      <Setting Name="Two">Parameter1 = Command for who? Example: All</Setting>
 +
    </Set>
 +
  </Set>
 +
  <Set Name="Load_Ogre">
 +
    <Set Name="Code">
 +
      <Setting Name="One">relay all oc !mcp -LoadOgre ${Parameter1}</Setting>
 +
    </Set>
 +
    <Set Name="Description">
 +
      <Setting Name="One">Loads Ogrebot.</Setting>
 +
      <Setting Name="Two">Parameter1 = Command for who? Example: All</Setting>
 +
    </Set>
 +
  </Set>
 +
  <Set Name="nc_Load_Ogre">
 +
    <Set Name="Code">
 +
      <Setting Name="One">relay all ogre</Setting>
 +
    </Set>
 +
    <Set Name="Description">
 +
      <Setting Name="One">Loads Ogrebot.</Setting>
 +
    </Set>
 +
  </Set>
 +
  <Set Name="End_Ogre">
 +
    <Set Name="Code">
 +
      <Setting Name="One">relay all oc !mcp -EndOgre ${Parameter1}</Setting>
 +
    </Set>
 +
    <Set Name="Description">
 +
      <Setting Name="One">Ends Ogrebot.</Setting>
 +
      <Setting Name="Two">Parameter1 = Command for who? Example: All</Setting>
 +
    </Set>
 +
  </Set>
 +
  <Set Name="nc_Load_Ext">
 +
    <Set Name="Code">
 +
      <Setting Name="One">relay all ext ${Parameter1}</Setting>
 +
    </Set>
 +
    <Set Name="Description">
 +
      <Setting Name="One">Loads an extension.</Setting>
 +
      <Setting Name="Two">Parameter1 = Extensionname. Example: isxogreaion</Setting>
 +
    </Set>
 +
  </Set>
 +
  <Set Name="nc_Unload_Ext">
 +
    <Set Name="Code">
 +
      <Setting Name="One">relay all ext -unload ${Parameter1}</Setting>
 +
    </Set>
 +
    <Set Name="Description">
 +
      <Setting Name="One">Unloads an extension.</Setting>
 +
      <Setting Name="Two">Parameter1 = Extensionname. Example: isxogreaion</Setting>
 +
    </Set>
 +
  </Set>
 +
  <Set Name="Unload_Ext_Who">
 +
    <Set Name="Code">
 +
      <Setting Name="One">relay all oc !mcp -UnloadExt ${Parameter1} ${Parameter2}</Setting>
 +
    </Set>
 +
    <Set Name="Description">
 +
      <Setting Name="One">Unloads an extension for who.</Setting>
 +
      <Setting Name="Two">Parameter1 = Command for who? Example: All</Setting>
 +
      <Setting Name="Three">Parameter2 = Extensionname. Example: isxogreaion</Setting>
 +
    </Set>
 +
  </Set>
 +
  <Set Name="MCP_RawCommand">
 +
    <Set Name="Code">
 +
      <Setting Name="One">MCP_Raw</Setting>
 +
      <!-- OgreIRC is specifically coded to allow unlimited parameters (capped at 100 to prevent impossible infinite loop) -->
 +
      <!-- Setting Name="One">ogre ircm ${Parameter1} ${Parameter2} ${Parameter3} ${Parameter4} ${Parameter5} ${Parameter6} ${Parameter7} ${Parameter8} ${Parameter9} ${Parameter10} ${Parameter11} ${Parameter12} ${Parameter13} ${Parameter14} ${Parameter15} ${Parameter16} ${Parameter17} ${Parameter18} ${Parameter19} ${Parameter20}</Setting -->
 +
    </Set>
 +
    <Set Name="Description">
 +
      <Setting Name="One">Sends a message or command to OgreConsole</Setting>
 +
      <Setting Name="two">Parameter 1 to 100 = Commands and paramters</Setting>
 +
    </Set>
 +
  </Set>

Revision as of 19:58, 14 May 2013

Master Control Panel

OgreAion MCP.png

Command List

<Set Name="LetsGo">
	<Set Name="Code">
			<Setting Name="One">relay all oc !mcp -letsgo ${Parameter1}</Setting>
		</Set>
		<Set Name="Description">
     <Setting Name="One">This button removes movement restrictions such as HoldUp and campspot.</Setting>
     <Setting Name="Two">Parameter1 = Command for who? Example: All</Setting>
		</Set>
	</Set>
	<Set Name="HoldUp">
		<Set Name="Code">
			<Setting Name="One">relay all oc !mcp -holdup ${Parameter1}</Setting>
		</Set>
		<Set Name="Description">
      <Setting Name="One">This button turns auto follow off.</Setting>
      <Setting Name="Two">Parameter1 = Command for who? Example: All</Setting>
		</Set>
	</Set>
 <Set Name="Pause">
   <Set Name="Code">
     <Setting Name="One">relay all oc !mcp -pause ${Parameter1}</Setting>
   </Set>
   <Set Name="Description">
     <Setting Name="One">Pauses bots.</Setting>
     <Setting Name="Two">Parameter1 = Command for who? Example: All</Setting>
   </Set>
 </Set>
 <Set Name="Resume">
   <Set Name="Code">
     <Setting Name="One">relay all oc !mcp -unpause ${Parameter1}</Setting>
   </Set>
   <Set Name="Description">
     <Setting Name="One">Unpauses bots.</Setting>
     <Setting Name="Two">Parameter1 = Command for who? Example: All</Setting>
   </Set>
 </Set>
 <Set Name="Resume">
   <Set Name="Code">
     <Setting Name="One">relay all oc !mcp -unpause ${Parameter1}</Setting>
   </Set>
   <Set Name="Description">
     <Setting Name="One">Unpauses bots.</Setting>
     <Setting Name="Two">Parameter1 = Command for who? Example: All</Setting>
   </Set>
 </Set>
 <Set Name="Load_Ogre">
   <Set Name="Code">
     <Setting Name="One">relay all oc !mcp -LoadOgre ${Parameter1}</Setting>
   </Set>
   <Set Name="Description">
     <Setting Name="One">Loads Ogrebot.</Setting>
     <Setting Name="Two">Parameter1 = Command for who? Example: All</Setting>
   </Set>
 </Set>
 <Set Name="nc_Load_Ogre">
   <Set Name="Code">
     <Setting Name="One">relay all ogre</Setting>
   </Set>
   <Set Name="Description">
     <Setting Name="One">Loads Ogrebot.</Setting>
   </Set>
 </Set>
 <Set Name="End_Ogre">
   <Set Name="Code">
     <Setting Name="One">relay all oc !mcp -EndOgre ${Parameter1}</Setting>
   </Set>
   <Set Name="Description">
     <Setting Name="One">Ends Ogrebot.</Setting>
     <Setting Name="Two">Parameter1 = Command for who? Example: All</Setting>
   </Set>
 </Set>
 <Set Name="nc_Load_Ext">
   <Set Name="Code">
     <Setting Name="One">relay all ext ${Parameter1}</Setting>
   </Set>
   <Set Name="Description">
     <Setting Name="One">Loads an extension.</Setting>
     <Setting Name="Two">Parameter1 = Extensionname. Example: isxogreaion</Setting>
   </Set>
 </Set>
 <Set Name="nc_Unload_Ext">
   <Set Name="Code">
     <Setting Name="One">relay all ext -unload ${Parameter1}</Setting>
   </Set>
   <Set Name="Description">
     <Setting Name="One">Unloads an extension.</Setting>
     <Setting Name="Two">Parameter1 = Extensionname. Example: isxogreaion</Setting>
   </Set>
 </Set>
 <Set Name="Unload_Ext_Who">
   <Set Name="Code">
     <Setting Name="One">relay all oc !mcp -UnloadExt ${Parameter1} ${Parameter2}</Setting>
   </Set>
   <Set Name="Description">
     <Setting Name="One">Unloads an extension for who.</Setting>
     <Setting Name="Two">Parameter1 = Command for who? Example: All</Setting>
     <Setting Name="Three">Parameter2 = Extensionname. Example: isxogreaion</Setting>
   </Set>
 </Set>
 <Set Name="MCP_RawCommand">
   <Set Name="Code">
     <Setting Name="One">MCP_Raw</Setting>
   </Set>
   <Set Name="Description">
     <Setting Name="One">Sends a message or command to OgreConsole</Setting>
     <Setting Name="two">Parameter 1 to 100 = Commands and paramters</Setting>
   </Set>
 </Set>
Retrieved from "https://wiki.ogregaming.com/aion/index.php?title=Master_Control_Panel&oldid=113"