RevisionHistory

Revision history

This page needs some formatting! Later...

Oddities

• This is mostly a section for Kannkor.. just odd things I need to look at, at a later time.
• Necro "Night Fire" and "Pyre of Mori" are being listed as different spell lines because BookIcon is different. See if the trend continues, or if it's this one spell.
• When an aura is auto-upgraded in the bot, the old one needs to be cancelled or you get a error that it can't be cast yet.

In development (Not released yet)

• Ability Export
  • In the previous update, the following ( CastTime, FizzleTime, MyCastTime, RecastTime, RecoveryTime ) were changed from a float (1.5s) to milliseconds (1500). These have now been updated to reflect their original values so things work again.

In Closed Testing

Patch release date: 06/16/2016 Note: This is the new server *** Ogrebot 0.027

• ISXOgre
  • ISXOgre can patch from both primary and secondary servers.
• Ogrebot
  • Command For Who
    • Added the enhancements I made to EQ2's. Including the Not____, such as notfighter, not:___ (toonname), and IGW:____ (In group with) and IGWBN:_____ (In group with but not ____)

Patch release date: 06/15/2016 Note: This is ONLY available on the new server which is in testing.

• Auth/updater are now running on the new server.

Release date: 04/12/2016

• Ability Export
  • Unified Hand of Credence should work properly, same as the other group aego spells.

Release date: 04/11/2016

• MCP
  • Corrected a description on Connect_Uplinks and Disconnect_Uplinks. It was talking about EQ2chars...
    • Note: No code actually changed, only the description was incorrect. It was reading from the Uplink Info tab.
• Ability Export
  • AA abilities with high IDs will now show up in the list (Ageless Enmity)
  • Cleric AA: Beacon of Life now has the proper options (Target/# of people/%)
  • Cleric AA: Burst of Life now has the proper options (Target/%)

Release date: 04/01/2016 **

• Updated for ISXDK35

Release date: 03/06/2016 ** Ogrebot 0.026

• Note: I added a bunch of in-testing autohunt stuff. It's not perfect, but it's functional for the most part.
• Ogrebot
  • Added 'auto hunt movement' on the AutoHunt tab (Start Movement!)
• MCP
  • Added Connect_Uplinks
  • Added Disconnect_Uplinks
  • List_IPs
• ISXOgre
  • Added 'Ogre map' (Mapper for AutoHunt)

Release date: 12/10/2015 ** Ogrebot 0.024

• Recompiled ISXEQ which adds /pickzone as a command.
• OgreSkills
  • Now accepts 'Ability' Names. These are things like feign death and mend. It does NOT accept spell names.
    • To be clear, it accepts Gem# OR ability Name. make sure to quote if it has a space in it.
  • Examples:
    • ogre skills "Feign death"
    • Ogre skills 1
      • Would chain cast your ability in spellgem1.
• Includes MQ2Ic.dll
  • Please check MQ2 forums for more information.
  • DO NOT USE MQ2 OR ISXEQ ON THE NEW 'NON-BOX' SERVER! They are tracking players using MQ2 on it!!!! (And it doesn't work....).

Release date: 12/01/2015 ** Ogrebot 0.024

• Having 'Me' as an assist actually works now.

Release date: 11/19/2015 ** Ogrebot 0.023

• AutoTargetWhileHated now works if you are the RaidMainAssist, but not the GAT.
• Ogrebot
  • Setup tab
    • [X] On Events - Ding instead of really loud annoying noise. Such as a tell.
      • Instead of that really loud annoying noise, you will get a gentle ding instead.
    • [X] On Events - No noise at all. Such as on a Tell. This is not recommended. This would make it very easy for you to miss a tell
      • You will get no noises. No dings, no annoying noises, nothing, zip, nadda, zero, zilch...
  • These both work on the toon that gets the tell. For example: We have ToonA and ToonB logged in.
    • ToonA has No noise at all checked. When ToonA gets a tell, no noise happens.
    • ToonB does not have any of it checked. When ToonB gets a tell, ToonA will still make a noise because ToonB says it's okay to make noises for his events.
    • I will revisit this system at a later time to see if there is a better method for it all. At least you will have an option of stopping the noise for now.

Release date: 11/14/2015 ** Ogrebot 0.022

• Ogrebot
  • Fixed noises from, well anything that made noise, such as Tells, AA dings when > 75, etc etc.
  • FUNDAMENTAL CHANGES TO DEFAULT BEHAVIOUR
    • Previously when you loaded the bot, toons would not take any offensive action until you set a Group Assist. This meant that soloing wasn't possible, and raid assisting couldn't exist. This has changed.
      • By DEFAULT when the bot loads, it is set to assist yourself (or no one). Meaning if WILL engage with anything you target on them. I recommend pausing before clicking on guards!
      • Renamed the 'SetMainAssist' button to 'SetGroupAssist'. When you press this, it also makes your entire group change their assisting to the GAT (Group Assist Target).
        • Note: SetMainAssist button has been set to be an alias for SetGroupAssist. This means they both do the exact same thing now. Just one is more clear now.
      • Added a 'SetAssist' button. This will change who they are assisting. Value options are:
        • Me - This reverts it back to the default state, where they will attack anything they target.
        • GAT - This sets their assist to the Group Assist Target. Note: This does NOT change who the GAT is. You need to use SetGroupAssist (or manually: right click on someone's name -> Roles -> Main Assist).
        • 1-3 - This sets their assist to Raid Assist #. This does NOT assign someone the role of "Raid Assist #". You will have to do this manually via the Raid Window UI in game. (If someone knows a command to assign this, let me know).
        • Quirks: GAT and RaidAssist1 and Me work great. RaidAssist2-3 don't work the best. You can only see who RaidAssist1 is. So if you are RaidAssist2 or 3, you will try to assist yourself. This means changing targets requires you to double click mobs instead of single click them. (Basically you click once, the bot changes it, so you click it again. Alternately, you can self target twice, then target a mob). I've put in a feature request to MQ2 to have this added.
    • Example of usage:
      • SetAssist: all, 1
        • This would set everyones assist to Raid Assist 1.
      • SettAssist: all, GAT
        • This would set everyones assist to Group Assist Target.
• OgreConsole/MCP
  • Added -Reset_Buffs / -Reset_Debuffs
    • Takes 1 parameter: ForWho
    • Will reset the internal timer on Buffs or debuffs. Basically making it recast all buffs as if the bot was just reloaded. (Useful when people have been slain and just res'd).
  • Added -SetGroupAssist - This is for setting a Group Assist Target. (Identical to SetMainAssist)
  • Added -SetAssist - See above
  • Added -Reset_XTargetSlot - Takes 1 parameter. A number from 1 to 14. Any other value, such as 'all', will reset them all to 'Auto-Hater'.

Release date: 11/11/2015 ** Ogrebot 0.021

• Fixed another pet spammage...
• HUD
  • Nearest PC
    • Will no longer show raid members
• OgreBotUI
  • Updated 'Show Relay Settings' window.
  • Added "Console Messages"
    • You can check these boxes to have messages sent to OgreConsole when these events happen. For example: AA Gain - Any time you gain an AA, it will be sent to the Ogre Console: Kannkor has 27 AAs.
• Ogrebot
  • Mez
    • Fixed the only mez > 90%. (This fixes it to work AND it will now save/load)
  • Autohunt
    • Autohunt no longer is disabled if you are campspotted

Ogrebot 0.020

• OgreBot
  • Fixed 'Fighter' not being a valid ForWho. (This also fixes melee, since all 'tanks' were considered a Fighter that it was checking).
  • Removed some more pet spam from going to OgreConsole. If any more goes there please copy/paste it to me.
• Added: Ogre BuySpells
  • Target and open a merchant window.
  • Type into the console: ogre buyspells
  • This will buy all spells for your class from the current merchant, then scribe them.
  • Note: It will buy ALL spells for your class, regardless of level. It will NOT buy any spells you already have scribed or any spells you have in your inventory. This means it's safe to run more than once on the same merchant.
• Added: Ogre ScribeSpells
  • Goes through your inventory and scribes any spells you have that are equal or under your level.
• OgreBot UI
  • Hid the move into melee range, etc checkboxes, since they aren't currently used.
• MCP
  • Confirmation Dialog Box now supports Large Dialog Windows. IE: When you use the guild hall porter dude. (Buy a stone and give it to him, then enter his portal).
• Ability Export
  • Added some tags, for some future developments.

Ogrebot 0.019

• Added -ccs as an alias to change campspot.
• Ogrebot
  • Rearranged the Settings tab a bit... this will likely keep happening as I add more options and attempt to group ones together that make sense.
  • AutoHunt Scan radius now reads off the UI instead of hardcoded being 50. If it is blank, the default is 50.
  • Hide the AutoHunt Pull abilities. Since they weren't used at all. Once you target a mob, anyone with ignore NPC HP will use anything in their cast stack.
  • When hit by a mob, you will avoid meditating for 5 seconds. Not really tested... But should work :)
• MCP/OgreConsole
  • Added JoustIn/JoustOut/JoustOn/JoustOff. All take 1 parameter of ForWho. These are identical to EQ2's.
    • Keep in mind, at the time of writing this there is no move into melee range/behind. That is coming soon (tm). But if you joust in on someone, you can freely move them.

Ogrebot 0.018

• OgreBot
  • Added [X] Force Named CA
    • Makes you use NamedCAs even if you're fighting a non-named.
  • Changed GroupMainAssist from XTarget 5 to XTarget 1. This way XTargets 2-10 can be more easily iterated through.
  • AutoTargetWhenHated has been rewritten.
    • Previously it only read off of XTarget 1. The problem is, if XTarget 1 was over 200m, or did not have LOS, it wouldn't target any other mob on the Auto Hater.
    • It now reads the entire XTarget window and targets anything within range/with LOS. Top down priority. Will only XTarget slots that are "Auto Hater" ("Auto" in game).
  • Added [X] Enable Mezzing
  • Added Crowd Control tab
    • (Yes, I will rename one of these... likely this to Mezzing, because you can only use abilities that actually Mez a mob).
    • Scans the XTarget window for 'Auto Hater' and any mob that is not the Assist target, it will be mezzed.
    • If all mobs are mezzed, it will re-mez any mob with 7 seconds or less remaining on the mez. (Plans to make this user modifiable).
    • Will only mez if the GAT has a valid target.
    • If mez is broken, it will re-check all mobs with the name that was broken.
    • Added an option to only mez mobs >= 90%. This means if a mob gets low and you want to let dots kill it off, you can and not have to worry about it being mezzed.
    • Note: If you want to announce who you are mezzing, you can add this to the announce tab. Use %t for your target, or *Target*.
  • Fixed LoadProfile. It should now work.
  • Rewrote much of how casting abilities outside of the Caststack works. For example: MCP/OgreConsole/Mez tab.
    • P.S. Special thanks to some wizard hiding under my name for requiring this.
• OgreSkills
  • ogre skills Gem#
    • This will chain cast Gem#.
    • This requires you have a target (such as yourself). When you clear your target, the script stops.
    • If it summons an item, the item will be auto-inventoried.
• OgreAutoLogin
  • Added a simplistic AutoLogin. Note: This is just an early version that "works". Later on I will create a more comprehensive login, closer to EQ2's with a GUI etc.
  • Note: This will ONLY login toons on the current computer. If you use more than 1 computer, set this up on each computer for the time being.
  • To use: Edit the file: /innerspace/scripts/EQ1OgreBot/AutoLogin/Temp_Settings.iss
    • Edit your character names where it says "ToonName#". This is also the order they will be logged in.
    • If you are logging in any number of characters other than 6, make sure you edit the "ToonsUsed" value also. This can be increased up to 24.
    • Edit the GameName and ProfileName to match your own.
    • Feel free to edit the two values at the bottom how you see fit. The WaitForToonToLogIn - If set too low, I found the game would lock the UI files, and you'd end up with toons where their entire UI had reset. Edit at your own risk!
  • You can create a desktop icon to load the teams.
  • Take an innerspace icon and add to it. The shortcut should look something like this.
    • C:\Games\Innerspace\InnerSpace.exe runscript eq1ogrebot/AutoLogin/OgreAutoLogin 1
    • The number at the end is which group you want to load.
• Added ISXEQMovement
  • This is a straight compile from: http://www.macroquest2.com/phpBB3/viewtopic.php?f=63&t=18585
  • It is the one with mesh support.
  • It is auto-loaded with ISXOgreEQ1

Ogrebot 0.017

• OgreBot
  • Assist
    • People should now assist if the target is an NPC's pet. (I believe this will work for named also... need to be tested).
  • Added an additional check to see how many group members are dead. (This should fix AutoHunt)
  • CastStack
    • Offensive abilities are now allowed to be cast on NPC's pets.
  • Note: It's possible there are other places this needs to be added in also. If you find something not working on a pet, let me know!
• Added Radar!!!!
  • ext ISXEQMap
  • This needs to be loaded PRIOR to logging into the game or you will crash. Note: ISXOgreEQ1 automatically loads this now. If it causes issues I will remove it.
  • You can then filter options on/off and they will show on the map.
    • Type: mapfilter in the console to see what options are available. You turn them on/off with show/hide.
    • Few examples:
      • mapfilter PC show
      • mapfilter NPC show
      • mapfilter NPCConColor show
      • mapfilter NormalLabels show
        • this shows the labels from the mappacks.

Ogrebot 0.016

• MCP
  • Fixed "LoadOgreBot" to actually load Ogrebot... instead of just telling you how to load it.
  • Added Profile___
    • Loads an Ogrebot profile. Takes 2 parameters:
      • Parameter1: ForWho
      • Parameter2: ProfileName
• Ogrebot
  • If you pause the bot mid-cast, it should not assist once it is done casting the ability.
  • Fixed a bug with rank abilities (rank2/3 for example) not working properly. Just a reminder, any time you get a new ability OR new AA, you should run a new export.
• NPC HUD
  • Should now only show things you can actually target.

Ogrebot 0.015a

• Ogre Export
  • Added level 105 cleric and shaman unity (combined) spells to work.
• Ogrebot
  • Some tweaks to the in-development autohunt.

Ogrebot 0.015

• OC
  • Added -ConfirmationBox | -CBox <ForWho> <Value>
    • Acceptable values right now are: 1, Yes. Anything else is considered "No".
    • Needs further testing.. but should technically work on anyone generic confirmation box pop up.
  • Added -ResetTask <ForWho> <TaskName>
    • Removes a task from the Quest Journal. If the task doesn't exist, does nothing.
• MCP
  • Made buttons for the above.
• ogre export
  • Now accepts a parameter "all". ( ogre export all )
    • This will do an export and every single ability will be available. It basically makes every ability it's own spell line, meaning no spells will be auto-updated.
    • This has a few side effects...
      • Ogrebot's load time is drastically increased. From a few seconds, to 30'ish seconds. This is because it has to generate data for thousands of abilities, instead of < 100. Actual performance is uneffected.
      • This can have some.. "odd" side effects based on your profile. With the old export ( ogre export ) it would auto upgrade abilities for you. If you did not save your profile, when you run this new export, it would actually show whatever abilities were saved, not the ones that appear. Chances are, this will effect no one at all... except for me to find the oddity.. :)
      • You can freely flip between "ogre export" and "ogre export all" (keep in mind you have to reload the bot after each one). But the auto (ogre export) will attempt to convert your abilities to whatever it feels is the best option.
      • Long story short, until I can get all spell lines working how people feel is acceptable (which will take a very long time), you now have full freedom of using any ability, including using a current tier AND an old tier of the same ability... since that is acceptable.
      • Feel free to give ideas/feedback on what the best option is for this whole spell line thing. I'm trying random things to see what works... and what gives everyone the options available to them they want.

Ogrebot 0.014a

• Ogrebot
  • AutoTargetWhenHated
    • No longer targets NPCs over 200 meters away.
    • No longer targets NPCs that do not have LOS (Line Of Sight).
  • Added messages when an export is out of date. IE: With the changes below to auras, everyone with an aura HAS to run the export, or it will chain cast the aura.
  • Added a ton of spam for something I was debugging and forgot to remove.. oops!
• Ability Export
  • Added support for Shaman "combined" spell: 'Talisman of the Courageous'
  • Added support for Cleric "combined" spell: 'Unified Hand of Certitude'
  • Added support for Druid "combined" spell: Natural Unity
    • I suspect there are others I need to do this for... report them and I can add them.
  • Added support for auras named differently than they appear in the aura window. (SIGH).
• ISXOgreEQ1
  • With this new compile, it will include OgreConsole fixes for Win8/10 if they existed here (as they did with EQ2). Either way.. poof, gone!

Ogrebot 0.013a

• ISXOgreEq1
  • Added auto-joining of new default relay group: ogre_everquest1
    • For those who use EQ2, this is identical to what I did with eq2, except the relay group is ogre_everquest1 instead of ogre_everquest2. I will be changing over all "relay all" to the new relay group (exact same as I did with eq2).
• OgreMCP
  • Creates default relay group
  • Converted all relay all's to relay ${OgreRelayGroup}
  • Converted all commands for MCP to relay group
  • Alt+~ now toggles MCP, same as it does for EQ2.
  • Pressing the X will now hide instead of close MCP.
  • Started converting MCP buttons to OgreConsole buttons. Please note: Some of these buttons have been completely revamped and changed and you will HAVE to fix your parameters, or they may not function properly. (I'm basically adding a ForWho parameter as the FIRST parameter for everything).
• Various files
  • Did a massive search/replace to catch all (most? Possible some were missing) relay all to relay ${OgreRelayGroup}
• AbilityExport
  • Resist Buffs should now be separated by type. Note: These are hardcoded, so if any are missing, let me know and I can add them in. It's a little cheaply done, but best I could find for now.
  • SK's Aura of ___ should now be separated by Pain and Hatred. If there are others, let me know and I'll add them.
  • Ranger's call of ice/fire/nature's should now be different spell lines
• OgreBot UI
  • Added Relay Groups tab.
    • This was just a copy of EQ2's. All the code is (should) be completely generic and work as is. Will test at a later date. (If someone else does use relay groups and they find any issues, please report with as much detail as possible).
  • Added OgreConsole tab.
    • Identical to EQ2's.
• OgreBotAPI
  • Along side the changes with OgreMCP, I had to make some core changes to these functions to allow for the 'ForWho' parameter as the first parameter. If anyone has scripting using OgrebotAPI, this may break existing scripts. My apologies! Beta is beta! :)
  • The following where changed:
  • Set_Paused
    • Old: Set_Paused[T/F]
    • New: Set_Paused[ForWho,T/F]
• OgreBot
  • Fixed a bug in the tell system that was making your pet tells be flagged as real tells. Oops!
  • OgreConsole has been implemented!
    • OgreConsole has been included with EQ1 now. The actual functionality of OgreConsole is identical (uses the same files) as EQ2. The exception is the parsing of commands. These are obviously separate. All MCP buttons have been converted to use OgreConsole.
    • Tells now go through OgreConsole instead of a pop up.

Ogrebot 0.012

• Added a delay after summon mount, so it shouldn't bug our your mount ever (or at least not as much). if it still happens report it and I can try to add more of a delay. Special thanks to darkain for testing and figuring out what was causing it.
• MCP -> ChangeCastStackListBoxItem - Now supports [AA].
  • Note: You MUST include the [AA]. Basically, you will use the exact text you see. The reason is, if you had a spell AND an AA in the list of the same name (Lets use Healing, and Healing[AA]). If I don't require the specification of [AA], then if you did a Healing toggle, it would toggle them both, even if you only wanted to do one of the two.
  • Fixed "Press_IS" and "Press_ISXEQ" options to not crash the bot.
• Because of how buffs work, it's extremely hard (if not impossible) to tell the difference between a real buff, and a temp buff, I have made all buffs have CA/NamedCA options. This will allow for temp buffs to be marked NamedCA.
• CastStack
  • "My En" (Endurance) options will be visible for everyone, even if you have mana. Mana should still remain only visible if you actually have mana.
  • Instant cast spells should now properly report they have been cast, and properly update the debuff list. (This seemed to only be an issue for spells (AA's worked fine) that had 0 cast and little to 0 reuse. SK's had a spell with 0 cast/1.5 reuse, and it caused it to be the only spell that was cast. Unfortunately it was a dot, so it accomplished nothing :(. Anyways! Resolved.
  • Spells that do NOT have a duration listed, will no longer check for recourse spells. This was preventing some spells from being recast. Such as SK's "Touch of Pigion". Will need to see if this has a negative effect on other recourse abilities. I don't think it will since they have a duration.
• AutoLogin
  • Updated for the DaybreakGames splash screen instead of the SOE Splash screen.
• ISXOgreEQ1
  • Ogre help. Corrected a missing line break.
• OgreBot
  • (Work in progress) Completely rewrote assisting to work on normal AND TLP servers.

Ogrebot 0.011

• Fixed a crash with single target AA's that were labeled @Group

Ogrebot 0.010

• Fixed accepting of resses
• Accepting of resses is only done if the person giving the res is on your auth list (Chars.inc, Chars tab in OgreBot)
• Wizard/Druid ports will once again show in the CastStack. This way if you really want, you could add them all to your CastStack with auto gem, gray them out, then create a "Port" tab on the MCP, and make a ChangeCastStackListBoxItem entry with Toggle. Then you would be able to mem/cast a port via 1 MCP button, then press it again to toggle it back off.

Ogrebot 0.009

• ISXOgre
  • Ogre Bot and Ogre Bot Toonname now work properly.
• Face/Melee/send pet
  • Now all work when the NPCs health is correct, and no longer are concerned with your mana/hp/en thresholds.
• Added 'ranged Attack'
  • Works like the following:
  • If MELEE ATTACK is checked also, then Ranged attack will only turn on if you are OUT of melee range.
  • The NPC has to be within 100 meters.
• Note: 'Turn off attack' will turn off ranged attack now also.
• Made 'Face NPC' only face if you are within 125 meters. I plan to revisit this later.
• Bards are now immune to the Group Buff distance check.
• Group members not in the zone will no longer cause the group buff check to fail.
• MCP
  • Added CastOn <ForWho> <Spell|AA Name> <Player Name>
  • Added CastOn_AA <ForWho> <Spell|AA Name> <Player Name>
  • Added CastOn_Spell <ForWho> <Spell|AA Name> <Player Name>
    • All 3 of these work exactly the same as the "Cast" options, except these can target a player.
    • Tested AA using a priest 'Radiant Cure' and tested Spell version with Wizard's Damage shield.
• Export
  • More variation of cleric nukes will now appear as options (Separated by recast time).
• "Circle of" spells are now only removed from the caststack for druids. (So cleric's Circle of Divinity shows up).
• "CA"s and "NamedCA" that are buffs, should no longer auto-fail due to range (since the range is 0). Instead it uses a 200m range, just to make sure the NPC is at least in "the area".
• MCP
  • Added: Relay_Settings_Change <ForWho> <ObjectName> <Value>
    • This changes various options inside of Ogrebot. Usually checkboxes on the Settings tab.
    • Valid Values are: TRUE, FALSE, and toggle.
    • Example: all, checkbox_settings_facenpc, FALSE
      • This would UNCHECK facenpc on everyone.
    • Example: priest, checkbox_settings_facenpc, toggle
      • This would toggle facenpc on priests only.
  • Added: ChangeCastStackListBoxItem <ForWho> <SpellName> <Value>
    • This enables or disables entries in the CastStack based on the Name provided.
    • Valid Values are: TRUE, FALSE, and toggle.
    • Example: all, Minor Healing, FALSE
      • This would disable (gray out) all minor healing entries.
    • Example: cleric, minor healing, toggle
      • This would toggle (enable or disable) all minor healing entries for clerics only.
      • Note: If you have two entries in your CastStack, one disable, and one enabled, it would toggle both of them. So you would be left with one disabled and one enabled.
• Added "Show Relay Settings" to the mini buttons (where Pause/Show Main are).
  • This opens a new window, that is a near copy of the "Settings" tab of Ogrebot. When these options are selected, they will relay the changes you make to ALL sessions.
  • Example: If you [X] Move To Area
    • That will turn check Move To Area for everyone (regardless if it is checked, or not currently).
  • Likewise, if you then Uncheck [_] Move To Area
    • Everyone's Move To Area will now be unchecked.
  • Generally speaking this window is used for mass turning things on/off for specific scenarios. For example, if there is a fight where you want everyone's melee attack off, you could easily disable it by checking the box, then unchecking. (You have to check it first, because the window loads blank).
• Testing of various turbo's to speed up the loading.
• Tells containing a language will now work as regular tells (and be relayed to IS1)
• Added (untested) accepting of res support. Unfortunately since Ogres are so superior, I don't die and was unable to test it.

Ogrebot 0.008

• ISXOgre
  • Help is now displayed any time a valid command is not typed. IE: ogre toonname will display help instead of doing nothing (for the record, ogre bot toonname is the correct syntax).
• Fixed a crash if you tried to load Ogrebot without a spell export.
• Ability Export
  • Fixed bard AE songs
  • Exports are no longer loaded prior to running a new one. Because they are person specific, there is never a reason to load the old information anymore. This way there will never be any garbage data in them.
• OgreBot
  • Bard songs with Ranks should now twist properly
• Export
  • Cleaned up a ton of stuff with the export. There will be some... 'oddities', for example on the bard.
    • It shows 3 different regen songs:
      • Cantata of Replenishment
        • In-game labeled as "Group v2"
      • Cantata of Rodcet
        • In-game labeled as "Group v1"
      • Chorus of Renewal
        • In-game labeled as "AE PC v2"
  • Bard "Spell Focus" should now be more widely available. I've attempted to make some spell lines based on what the focus offers. It should either work out great, or completely fail... :) So far it seems to be working.
• AA's with no duration (IE: that are suppose to last a very long time/forever) and show up in song window, should now work properly. (Tested with bard's Sionachie's Crescendo)
• Single target and self Mana Flow SPELLS should now be working. Tested with (Wizard) Tranquil Harvest and Necro's Twitch. Note: Do NOT use @Group, as you can't twitch yourself. Use @GroupMinusMe.
• Added "ManaHeal" as an option. This checks Mana levels instead of Health levels.
  • Any spells that were previously using Heal but were used for mana, need to be changed (I don't think this effects anyone as I just coded it in).
• AA-ManaHeal options should now work. Tested using Wizards Harvest of Druzzil
• Wrote a VERY crude autologin. You will have to edit a file and fill in information. I have no plans of providing any support for this hack job script.
• Fixed a bunch of bad code inside of campspot. Was forcing everything to be invalid for a few parameters (change campspot, for example).
• Removed some debug spam from the console.
• Changed some debug spam from always showing, to only showing if you have 'WhatIsTheBotDoing' checked. Some of this spam isn't really related to what the bot is doing, but it keeps it out of the console for now.
• Added the ability to automediate based on endurance. You can set both a mana AND an endurance threshold, however, as long as either one is met, you will meditate.
  • Example: You set it to auto med if you are < 50% mana, < 50% endurance. If you had 75% mana and 25% endurance, you WOULD meditate, since one of the two is below.
• Added the "Load" tab. This tab executes all lines of code in here as if they were typed into the console. For example:
  • runscript SetUpBindKeys
• Added 'Enable OgreMCP' to the 'Settings' tab. When clicked OR when a profile is loaded, will ensure the MCP is opened (or closed) based on the checkbox. (Works identical to how eq2 works)
• Added the following MCP commands
  • Camp <ForWho>
    • Camp to desktop.
  • RawCommand
    • Executes into the console. Basically anything that you could type into the console yourself. Each parameter should be on it's own line.
  • OgreBot_Load
    • Relay's: ogre bot
  • OgreBot_Load_Dev
    • Relay's: ogre dev
  • OgreBot_End
    • Relay's: Ogre end bot
  • ISXOgreEQ1_Load
    • relay all ext ISXOgreEQ1
  • ISXOgreEQ1_Unload
    • relay all ext -unload ISXOgreEQ1
  • Press_IS <ForWho> <Key>
    • Uses innerspace's "press"
  • Press_ISXEQ <ForWho> <Key>
    • Uses ISXEQ's "KeyPress"
• Shaman's GROUP unity spells are starting to work. These require me to code something special for each version, unfortunately. If anyone has one that isn't working, just send me your export, then I'll send you back what additional information I need to code it.
  • At this moment, single target unity spells are NOT supported. Will add this to my todo list later.
• Added "Cast" options to MCP.
  • As of right now, there are no "CastOn" options, they will be coming later.
  • Cast takes 2 parameters, <ForWho> and <Name of Spell/Ability/AA>
  • Checks to see if the spell is gemmed already. If not, skips it (at this time no support for gemming, will be added at a later date).
  • Checks to see if said ability can be cast as the next ability. IE: if it is available now, or will be available when you are done with recovery time.
  • Checks to ensure the spell could be cast right now, even if it has to wait 1.5 seconds for the recovery. IE: Not moving, not stunned, etc.
  • So far, this seems to work excellent on a fully botted toon. It gets a little quirky if you're "playing" a toon and pressing a few MCP buttons to make it cast some spells. To.. avoid some of this quirkiness, the following now happens (again, this is basically when YOU are casting spells manually also).
    • When you manually cast a spell, the bot basically goes into a short loop of doing nothing while a manual spell was cast, while still checking a few important things, to see if you are zoning, and to process any queued commands, this unfortunately includes MCP cast requests.
    • If you manually cast a spell, and while it's mid cast, hit an MCP button to cast another, the bot will enter the new cast routine immediately, then wait for your current cast to finish, then do the MCP cast.
    • In short, bot your botted toons, and play your played toons for best results.
  • There are 5 versions of Cast. I'd say 99% of the time, you could just use "Cast" and be fine.
    • Cast - Auto determines what the spell is. IE: Is it an AA? A Spell? An ability? A CombatAbility? Then uses the appropriate checks and casts.
      • Right now the order of checking is: AA, Spell, CombatAbility, Ability
    • Cast_AA - This will only check the AA abilities.
    • Cast_Spell - This will only check spells. This could be useful (although I fail to see why) if you had an AA and a spell with the exact same name, but wanted to use the spell version).
    • Cast_CombatAbility - This will only check 'Combat Abilities' (Your /disc's).
    • Cast_Abilities - This will only check Abilities (Things like bash/taunt/kick).
  • At this time, all spells must be their actual spell names. For example: Cannibalization for the AA. NOT Cannibalization[AA]. That is how it looks in the CastStack, but that is merely for human readability.
• Added an Announce tab!
  • Allows you to announce to your group or raid, what abilities you are casting, and with whatever message you want. I don't recommend you go overboard, or you'll just spam yourself, but it can be extremely useful for a few things. Such as:
    • Buffing Unity...
      • This would let you know, you should probably wait to pull more until it's done. (Unity has like a 48 hour cast time...)
    • Slowing *Target*
      • Just informational really.
    • Casting AA_Emergency_Heal_01 on *Target* (I couldn't remember a name...)
      • Would let you know when your priest blows that 4 hour cooldown ability to keep your ass alive.
• Group buffs should now only start to cast if all group members are within range. No more buffing if someone is miles away! This should not have an impact on group heals.
• All 4 mage pets should now be pet summons.

Ogrebot 0.007

• Did a pretty big fundamental change to how abilities are listed to the user, and a bit of how they are passed around behind the scenes.
• A new export is required immediately.
  • DELETE YOUR EXPORT AND MAKE A NEW ONE
• All AA abilities will have [AA] appended to the end. For example:
  • Harmtouch and Harmtouch[AA] will co-exist now.
• Changed (again) how wizard spell lines are determined. Should be much more accurate for non-detrimental abilities. All non-detrimental abilities of wizards will need to be re-added to the cast stack.
• Export - Slightly modified offensive abilities with a duration work
• Added the following MCP buttons:
  • Summon_Mount(ForWho, MountName)
  • Summon_Mountx2(ForWho, MountName, ForWho, MountName)
  • Discmount(ForWho)
• Bot now understand recovery time, and shouldn't attempt to cast another spell (or look for one being ready) until the recovery time is completed.
  • Bot now understands it can calculate recovery time before the server can. It is now a little bit slower to calculate it... :)
• Bards now twist songs MUCH quicker.
• All "tells" are now (admittly, not very elegantly) sent to IS1 in a message box. Excluded from this are pets, mercenaries, and your target (IE: vendors you are interacting with).
  • This is all temporary until I get time to implement something better, but wanted something incase players/gm send you a tell in the mean time.
• Buffs that go into the song window (HoTs, for example) previously were using a hardcoded spell timer to determine when they could be recast. For example, Cleric hot is listed as lasting 24 seconds, but duration increases push it way more. Now, these are based off of the worn off messages. I put a 60s 'safeguard' in for now, that will auto-expire the ability within 60 seconds, and allow the bot to recast it. Just incase something happens and the worn off message doesn't appear (I'm unsure if you get them out of group/out of zone).
• Group heals (spell variant) should now have a type, and should work.
• Group HoT's (spell variant) should now have a type, and should work. These will work based on the duration on YOU.
• For example: If you have selected: GroupHoT - Heal - 75% - 3 people. It has to meet those requirements AND it cannot have the HoT on you.
• Fixed a bug with determining group heals. Previously no matter how many people met the criteria, it only counted 1. (Not sure the group heal code was ever released, but noting it here that it has been fixed)
• Enchanter pets should now show up in the bot as a type and should work as a pet summon.
• Made another massive change to exports. Unfortunately, every single ability in the caststack will need to be re-entered. You can blame enchanters for this.
• So, after I redid my profiles AGAIN. I decided that was really stupid. Completely changed the way it handles saving/loading spell lines. It will take a tiny bit longer for the bot to load (probably 1-2 seconds), but you should never, ever, have to redo your profiles from any changes I make, ever again.
  • I believe with this change, if you do the following, you will not have to redo your profiles either:
  • When this is patched out, do NOT do an export right away. Load the bot, save your profiles. This should save them differently.
  • THEN do an export, and reload your bot. It should have everything in tact.
  • No promises... :)
• Export
  • Fixed a typo that was limiting AA abilities to 999, instead of 9999.

General

• NOTE At this time, you MUST load ext isxogreeq1 BEFORE you load into the game. IE: at the login screen, otherwise it crashes. Will investigate this when I have time.
• NOTE Ogrebot is designed for the "normal" servers. Progression servers may or may NOT work properly. At the time of writing this, I believe everything works on TLP servers.
• Clean up Auto Gemming, should be much more reliable to not mem an ability, then mem something else, or mem something that needs to be cast 5 times, only to demem it after 1 cast.
• Added support for Pet Summon abilities (currently no support for anything with pets at this time, including pet only abilities, or regular abilities on pets. P.S. I hate pets).
• Added support for Pet only haste abilities (tested using necro/shaman). If there are other pet only abilities that are classified different, I'll need to know the name of them.
  • There is still no support for single target abilities on pets (only abilities that are pet only). This isn't planned in the near future... cause I hate pets :)
• Main Assist (IE: your tank) won't every try to change his target to the correct Assist target.
  • Basically what was happening, is you would change targets on your tank as he was using a spell/ability, and it takes time for the assist to update, so he would change his assist back to the old target. Tank targeting should now really be in your control
• Fixed logic for combat abilities (Warriors 'Combat abilities' and anyone else who has those) should now properly list them up (up to 999 anyways). Previously it would only list 8.
• Added support for AA abilities of the following type:
  • CA
  • Self buffs ( group buffs should work also, but don't have one to test ). Note: That just because YOU know it's a self buff, doesn't mean the bot knows. If you want to check, you can open the export, if it has IsASelfAbility=TRUE, then it knows it is a self buff.
  • Single target buffs (Labeled: IsASingleTargetAbility in export). Unlikely to have proper tracking of the buffs, but unless the reuse is < duration, it won't matter.
• For abilities/spells/combat abilities/AA's that don't have enough data for the bot to determine it's proper use, all options are shown. This will open it up to user error, so be smart about what you are selecting... Dark, I'm looking at you.
• Buffs - Group abilities should no longer cast if you are by yourself. (IE: ungrouped).
• Bard
  • Many of the bard abilities are labeled exactly the same in code, but do slightly different things. For example, the snare that slows attack speed, and the attack speed slow, are both labeled identically.
  • For the time being, I removed the spell line identification for the 'common' lines. This means these abilities will NOT auto upgrade, but it does mean you can select any of them in the cast stack. May revisit this at a later date.
  • Unrelated to the above, I believe all stacking bard haste songs should properly show up.
• Self / Group AA buffs will check to see if the buff is on you before trying to cast it.
• Shaman - I personally don't recommend you scribe the level 58 heal "Kragg's Healing" because it has a 10 second cast time.
• Spell lines now take resist type into consideration.
  • Note: This will probably break every single offensive ability in your cast stack.
• Filtered out "Portal", "Gate", and "Translocate" from showing in the CastStack. (Wizard ports)
• Filtered out "Circle of", "Ring of", "Zephyr:" from showing in the CastStack. (Druid ports)
• Wizard
  • Changed how filtering of their spells work. Unfortunately, because most of their spells are exactly the same, except for 1 aspect, it means every single spell is different. Some spells cast quicker, some spells are resisted less, some have a reuse. All these factors were taken into consideration when automating the spell lines. The bot will do it's best at creating the spell lines, but there are some cases where it just won't work without taking away options.
  • Good example are cast times. There may be a time were you want a short fast spell with a low nuke amount, vs a long cast spell with a high nuke amount. Or a middle of the ground. To allow options, any spell with a different cast time is displayed. This does have the negative effect of showing some random one off abilities that are very low level. (Such as a level 8 AE nuke on the wizard, because it has a 'odd' cast time).
• Added support for Spell Auras (The ones in your spell book that go into gem slots).
• Added support for Combat Ability Auras (Tested with Warrior).
• Added Endurance (EN) option on the CastStack for people with no mana only.
  • You will notice when you first open the CastStack, it displays all available options until you select an ability. It will "look" scrambled, because the "My MP" and "My EN" are on the same spot, however when you select an ability, only the appropriate one is shown. This is intended.
• Added global Endurance options on the setup tab.
• NPC HUDs now displays Named NPC, and NPC under it.
• Following classes now have any ability with a recast time (more than 1.5) will have that spell listed in the caststack.
  • Paladin
• Good old Spirit of Wolf will now always appear in the export
• Added support for Single target group only abilities, such as Boon of the Garu. It currently doesn't do any checks to make sure that person is grouped. That'll be in the future.
• Enchanter's illusion forms should all appear in the cast stack. (Technically anything under Combat innantes should appear)

OgreBot

• Logic implementations/changes
  • If you try to snare a mob and get the message they are immune to snare, it flags your current target as immune and will not try to cast snares again. This flag resets when you acquire a new target. This should probably remember the target incase you tab to adds then back to the named, no reason to recast the ability again to find out it's still immune... In the future!
• Profile saving/loading. Works the same as EQ2.
• Even though abilities have vasty different names, if it's a direct upgrade, Ogrebot will upgrade your abilities in the profile as you level up. For example, Healing will become Greater Healing.
• Assisting is done by assigning someone Group Main Assist. You can do this via MCP: SetMainAssist.
• When OgreBot is loaded, it assigns XTarget slot 5 as the Group Main Assist's Target. This has to stay here, as the bot uses that information.
• For AutoTargetWhenHated to work, the character has to be the Group Main Assist, have no target at all, and XTarget slot 1 has to be set up to "Auto Add Hater Targets" / Auto.

Ogre Export

• Typing "Ogre Export" into the console, will create an export file for OgreBot to use. It contains information about each ability from the game, as well as additional information provided by the exporter. Any time you acquire a new ability, you need to run a new export to capture the information, then reload OgreBot to load the new information.

OgreFollow

• Fully functional OgreFollow. Same as EQ2 minus the flying.
• Add more details here for any non-EQ2er

OgreMCP

• Fully functional MCP. Same as EQ2.
• Add more details here for any non-EQ2er

Campspot

• Fully functional Campspot. Same as EQ2.
• Add more details here for any non-EQ2er

Tabs

Settings

• Melee Attack
  • If within Melee range, turns on attack
• Turn Off Attack
  • If you do NOT have a valid target, turns attack off. This normally happens naturally, but some times it gets stuck on and needs to be turned off.
• Ignore NPC HP (100%)
  • Ignores the option on the Setup tab. IE: you will attack anything regardless of it's health. This can be overridden on a per spell basis on the cast stack. This option also determines when you turn auto attack on.
• Enable Aliases
  • Enables the use of Aliases.
• Auto meditate
  • Will try to "sit" you to meditate in combat if your mana is below the threshold on the Setup tab. Will NOT attempt to sit if your assist target is within melee range.
• Auto meditate out of combat only
  • Same as above, but only happens when you do not have a valid assist target.
• Loot Corpses/Chests
  • Does exactly that. Only does it when you do not have a kill target.. the problem is, it happens when a mob dies before switching to the next target. Needs some tweaking that's for sure!
• Move To Area
  • Required to turn on campspot
• Auto Assist
  • Pretty sure it does nothing at this time.
• Dynamic Camp Spot
  • Visual indicator if campspot is on. You can also turn it off by unchecking it.

Setup

•  % NPC HP to attack
  • The % of health the bad guy has to be at, for you to attack. IE: 99% if you want to wait for your tank to "start" the fight.
  • This can be overridden globally by using the Ignore NPC HP (100%) checkbox on the Settings tab, or on an individual spell basis on the CastStack tab.
•  % NPC HP to move into attack range
  • Not implemented yet, but once in-combat movement is done, you won't move to engage until the mob is at this percent health.
•  % NPC HP for pet to attack
  • Only send your pet to attack if NPC health is at or below
• Mana Required to use CAs
  • CAs is just a global word used to describe any offensive attack
  • Can be overridden on a spell basis on the CastStack
• Health required to use CAs
  • Can be overridden on a spell basis on the CastStack

Aliases

• Can set up aliases
• Explain more why this is used... later.

HUDs

• Displays neareset NPC/PC/group members

Uplink Info

• Not sure this is working... It's reading from EQ2 directory, which will change in the future.. Or I copied my eq2 ones over.
• None the less, not used at this time, will be used for a full on auto login.

Chars

• Contains information about your characters. Be their username/password/toonname/server.
• This information is used for autologin.
• It is also used as an authorization list.
  • For example, when someone invites you to a group, if it is an authorized person, you accept the invite automatically.

Key Binds

• I think they work.. ? Probably needs some testing.

Debug

• CastingDebug - works.
• What is the bot doing - Works.

CastStack

• Left side lists all available abilities the bot knows about. If you're missing any, do an 'ogre export' in the console. Once it is done, reload the bot.
• Selecting an ability from the left list, populates the combo boxes in the center. You are telling the bot how it should use this ability. For example, as a heal, as a CA, as a Named CA (on named only), as a buff, or Non-Combat-Buff.
• After selecting the type (CA/Heal etc), it displays various other options.
• [ID] - Ignore duration
  • If NOT checked, if the ability has a duration, the bot will not recast the ability on the same target, until it has faded (or is about to fade, once the ability has completed 90% of it's duration, it's considered to be rebuffable).
  • If checked, the bot ignores the duration, and will recast as if the ability was not on the NPC. (Not sure this is useful in EQ1, but ported it over from EQ2).
• # of Ppl
  • Not used yet... but it's for:
  • If you select a Group heal, you would say 3 people have to be at the threshold before it would heal.
• HP/Mana %
  • Used for heal abilities. At what percent will the ability fire?
  • Example: Greater Healing -> @ Group -> 85%
    • This would cast Greater Healing on any member in the group that is below 85% health.
• My HP < __
• My HP > __
• My MP < __
• My MP > __
• NPC HP > __
• NPC HP < __
  • The 4 above override the global %health/mana required to use CAs. These can also be assigned to ANY ability.
  • For example: If you wanted to... be weird... You could assign a buff to only cast when a mob has > 50% HP but less than 75% health, while you're mana is < 25% and your health is > 75%.
    • This greatly changes how the ability works, because buffs don't normally require a check to the mobs health, but by assigning a mob HP check, it now checks, so will only cast if you have a valid kill target.
• Auto Gem When needed
  • When this option is selected, it will mem the ability to gem # (Forced Gem Slot). If that is not entered, it uses gem #8
  • This will ONLY de-mem abilities that are available to be cast. This way you aren't dememing an ability that the bot is wanting to use.
  • In short, use 'Auto Gem' for buffs that will rotate in and out. I recommend you pick 1 gem slot, and let the bot use it.
• Forced Gem Slot
  • When this is filled out AND Auto Gem is checked, this is the gem slot Auto will use. Again, with Auto checked, it only gems an ability if the gem slot is available (or empty).
  • When Auto is NOT checked, this will mem the ability immediately when said ability could be used, regardless if the gem is available or not. This is a good option for when you are leveling up, and your abilities will convert to the higher ability, the bot will then mem the new version for you.