Latest revision as of 06:01, 31 October 2019

OgreMCP

Tab Summary

MCP = Master Control Panel. OgreMCP is used to pass commands via the uplink. To load OgreMCP, type "ogre MCP" and a new window appears.

Note: Nearly all of these buttons are sending commands through the uplink, and will affect ALL sessions connected.

With Version 15, OgreMCP was completely redesigned. It is now one of the most advanced UI windows in the Ogre collection. It has taken customization to the next level.

Types of buttons

There are four different types of buttons.

Setup button - When you click the setup button a new window appears that allows you to customize some of the options about the MCP itself. Such as the height/width of the window, of the static window, of the buttons, and even the spacing between the buttons. Generally speaking, I'd recommend keeping the defaults.
Frame changers - The first 4 buttons on the left most side. By default they are labeled Combat, Zones, Objects, and Other. You can rename these to anything you want. They simply change the "Frames" (or sets of buttons) on the right hand side.
Static buttons - These are buttons that never move. This is anything on the left side. By default, this is 18 buttons. Note: Four of these buttons are the frame changers. The other buttons can hold any command.
Frame buttons - These buttons are specific to each frame and are visible or hidden depending on which "Frame changer" is selected. By default there are 24 buttons. These buttons can hold any command.

About Commands

What is a command?

The MCP is made up of two types of files. Visual files, and command files. The visual files simply show the buttons and have a (not visible) "command" attached to it. When this button is clicked, is the command is run.

Where do I get commands?

There are two command files. One that is provided and updated by me. The other is one you can add custom commands too. The reason there are two, is so when I update the master command file, it doesn't effect yours.

How do I make/use/change/ buttons?

You simply right click a button and an edit window appears.

[Need picture of right click edit window]

From here, you select the command. If you're not sure what the command does, select it and read the description. If it requires parameters, be sure you enter them in. Under the select command is a custom button name, so you can name the button something that will make sense to you. When you are ready to save it, press the Apply button.

Default Configuration

This is just a brief description of the default setup of the MCP. For a list of commands and customization options see the commands section.

Title Bar Buttons

Setup button -
ForWho Button - *When MCP loads, there is now a new window. Labeled 'For Who'.
- This will modify MCP buttons in real time. There's two sections.
  - ForWhere (OgreConsole and IRC)
    - If NONE of these are selected, then it uses whatever kind of button it was. For example: If you have a "Cast" button, that would use OgreConsole. If you have a "OgreIRC" button, that will use IRC.
    - If you select OgreConsole, then ALL buttons will be sent to OgreConsole, including those that are set as 'OgreIRC'.
    - Likewise, if you select IRC, all OgreConsole buttons will be sent to IRC. Note: IRC must be set up prior or these commands will be sent to the avoid. IRC is generally used for bot raiding.
  - ForWho
    - Any button where a ForWho is possible, and it is not specified, will be converted based on your selection. For example:
      - MCP -> Jump. If you do not specify the ForWho (leave it blank), the default is all. However, is you select something in the list, such as [x] Mages only, it will then only apply to mages. You could then select Priests only, and press it again, and only priests would jump.
    - There is a [x] Multi-select option, that lets you select more than one option. You need to be smart about this, as you can make impossible scenarios. Such as: [x] Mage only and [x] Priest only. This is an AND, not an OR. If you selected both, it means someone would need to be a MAGE and a PRIEST, which is impossible, so no one would listen to your button. Multi-select isn't used often, but cases where it is used, are usually for a specific group and a specific class. Such as: [x] G3 Only and [x] Mages only. This means Group 3 and Mages only will listen to the command.

[x] IRC Me Only
- This will be phased out, as using [x] OgreConsole will do the same thing
When you hide (alt+~) MCP, it will hide the ForWho window also. When you unhide MCP (alt+~), if the ForWho window was visible before it was hidden, it will be visible again. If it was hidden before, it will remain hidden.
This window is HIDDEN by default. You can click the [ForWho] button (beside the [Setup] button) on the MCP to show it. If you wish for it to always be shown on load, inside of [Setup] is a checkbox that will have it show on load.
If you wish to specifically invoke this new behaviour, you can do so via command line. Using the keyword "auto" in place of any forwho, and adding a -cfw <ForWhoHere> BEFORE any commands. Example: !c -cfw g1, would result in all commands on that same line, having a default of 'g1' if it's not supplied.
In order to complete this change, I had to manually change every single OgreConsole/MCP command that exists. That means every single button. It's possible I made a mistake/typo. If ANY button that was working prior, is not working now, please right click it (to edit it), then take a picture and send it to me. Then I can reproduce the button and fix it. Please include a picture of your ForWho UI also, so I know what you have checked.
Enable Swapping - Will allow swapping of buttons to different locations on the MCP. Check Enable, Select the MCP button you wish to move, then Select the destination MCP Button. DONT FORGET TO TURN OFF
IRC Me Only - Will change all IRC related buttons from !c All to !c Me. Allowing you to control only your local CPUs using IRC Commands without Un-auth'ing someone.

Main Buttons (Left side)

There are multiple "Tabs". Clicking each of these changes which buttons appear.
- Combat
- Zones
- Objects
- Other
- 5
- 6
- 7
- 8

There are 24 static buttons (includes the tabs from above). These never disappear, regardless of which "tab" you are on.
- Lets go - Defaulted on when the bot loads. This is used to remove the following flags: Hold up, No move, Do not move, Camp spot, Fiegn death. You can also use a chat command of "lets go" in a tell/group/raid to activate this command. -Queued command. Happens when the bot finishes what it is doing.
- Hold up - Turns OFF auto follow. -Forced command. This happens immediately, regardless if the bot is doing other things.
- "OFollow" - OgreFollow
- "OFol-Dft" - OgreFollow Defaults
- "OFol-++" - Increases follow range (Puts more distance between you and the follow player)
- "OFol ---" - Decreases follow range (Puts less distance between you and the follow player)
- CS-JO-JI - CampSpot (Default), Joust Off (default), and Joust In. This is used to set all your toons to a campspot of where they are, but allow melee to fight. Gives easy access to joust out if needed.
- Jst-Out / Jst-In / Jst-Off - See Jousting below.
- Pause - Presses the "pause" button on the bot.
- Resume - Resumes the bot (counter to Pausing it).

Jousting

"Jousting" just temporary disables campspot(so move into melee range is then allowed). When Jousting is turned back on, it re-actives campspot (thus disabling move into melee range).
USAGE:
- Note: Move to Area must be checked on the settings tab of the character for the campspot to work.
- Turn Campspot on
- Use "Jst off" (Joust Off) and input anyone you do not want to be jousting (such as "casters", or "healers"). [Optional step]
- When you wish to allow your jousters to melee, hit "Joust in"
- When you wish your jousters to get out, hit "Joust out"
- NOTE Currently Jousting only supports people who use "move into melee range" as their way of "Jousting in".
Any Joust command will do nothing if you do not have Campspot enabled.
Joust commands are added to the main queue. Meaning when the bot is finished doing it's current task, it will go through the queued commands. You can override a Joust in command with a Joust out command, assuming the bot isn't doing anything else (such as a bard in the middle of casting a spell while they are running).
Other uses: You are fighting a mob that expodes, or you need EVERYONE to run very far away at a certain point in the fight. Go to the "safe spot" and turn campspot on for everyone, then hit "Joust in". This temporary turns off campspot. You can then move your toons any where you want. When the mob is going to explode, hit "Joust out" and they will run to your camp spot.

Combat Tab

CmpSpot - Forces people to stay within a certain distance of a pre-designed spot. (Useful for knockbacks etc) (NOTE: Requires "Move to Area" enabled on Ogrebot)
- Input box #1 - Camp spot for who? - Who will be listening to this command. Default is all.
- Input box #2 - Distance - Min distance <space> max distance.
  - Min distance - How close do you stay to this spot. Default is 2 (almost right on top of it).
  - Max distance - Only move to this distance if you are within this close to it (don't need any zone-wide running). Default is 75, which is quite far away.
CS-Dft - CampSpot Default. Equal to pressing CampSpot and pressing <Enter> twice.
Sanct - Sanctuary - Queues up the spell Sanctuary for templars (if it's ready).
DivineR - Casts Divine Recovery if it's available (Cleric AA).
BDance - Makes you break dance.. err.. Will cast Blade Dance if it is available (Bard AA).
Imm-Res - Immaculate Revival (Cleric end line ability).
- If any priest or fighter is dead, the ability is cast.
- If any 2 people are dead, the ability is cast.
  - If you wish to change the # of people dead to cast, you can pass it 1 parameter(in OgreMCPXML). The default is 2 and doesn't need to be specified.
Otherwise it will not cast.

(Changed Sanctuary, Blade Dance, Divine Recovery over to the new CastFromUplink function. )

Verdict - If you can cast Verdict, you will.
Channel - If you can cast Channel, you will.
C-Focus - If you can cast Channeled Focus, you will.
F-Follow - ...
Pet Off - Back's your pet off.
Evac - If you can cast evac, you will.

Come2Me - Move to the player giving the command. The following can be a prefix for the come to me command. Also works as a chat command as follows.
- Note: The player giving the command must be authorized (in eq2chars.inc).
- Note: You need Move To Area selected for these to work, and a target (can be yourself).
- "come to me" - Everyone.
- "melee come to me" - Fighters/scouts only.
- "mages come to me" or "casters come to me" - Mages only.
- "priests come to me" or "healers come to me" - Priests only.
- "g# come to me" - Anyone in a raid in that group #.
- "toonname come to me" - Anyone with that toon name, such as "Kannkor come to me".
Coe-Sht - If you can cast Coercive Shout, you will.
Res - Counter to "Stop Res" below. Turns Resing on ONLY if it was turned off via Stop Res.
Stop Res - Temporarly turns resing off. Use "Res" to re-enable.
Revive - Revive - WARNING! If there are multiple options, it does NOT choose the one you have highlighted. I haven't spent the time to determine which one it does.
6

Assist - "Dynamic Assist" - Change assists on-the-fly. Note: Auto assist MUST be checked or this option does nothing.
- Input box #1: Who should be assisting? Who will listen to this command.
- Input box #2: Who do you want to assist?
- Example usage: Input box#1: Mages, Input Box #2: Kannkor. This would make all mages assist Kannkor. I could then do: Input Box#1: Melee, Input box #2: Roknnak. All melee would be assisting Roknnak (while all casters are still assisting Kannkor).
- Note: Who should be assisting can take "g1, g2, g3, g4" as options. For example, lets say you're in g1 and your botted toon is in g4, you could do assist -> g4 -> tank_in_g4_name.
- Note: Putting a blank option in Input Box #2 clears this option for EVERYONE.
WarMyth - Warlock Myth toggle.
TShell - If you can cast Tortoise Shell (AOE blocker), you will.
NoMove - "Do not move" - temporarily disables move into melee range, move behind, and auto follow. Use "Lets go" to clear.
No Target - Clears your target. Useful to stop many various movements.
Test - Test used by Kannkor. You can ignore this (just runs a test file that you don't have).

Zones Tab

(Zones - Has zone specific stuff. Mostly HUDs.

Exeter - When fighting Maldonous (sp?) Exeter in Palace of Ferzhul, every 20% all 6 people in the group must click the flames. This does that for you. Click once every time he goes away.
ScavMid - ...
Trak hud - On-screen HUD that puts the name/distance of the closest PC and closest special to you. I use it when I kill Trak. (Toggle on off)
Turt hud - ...
5
InfoOn - Toggles information about a Named NPC or npc, and distance from your cleric/shaman/druid in your group.

Orb-Yel - Orb clickers for Penda/Kendis
Orb-Blck - Orb clickers for Penda/Kendis
Orb-Purp - Orb clickers for Penda/Kendis
4
5
6

Orb-Blue - Orb clickers for Penda/Kendis
Orb-Grn - Orb clickers for Penda/Kendis
Orb-Red - Orb clickers for Penda/Kendis
4
5
6

Ld Doljon - Lord Bob, Loads it on all sessions.
End Doljon - Lord Bob, Ends it on all sessions.
Dol-To-Me - Lord Bob, Jump - Tells everyone to get to the pad your toon is closest too.
- For example: When he puts 1 pad acid, if your tank is NOT on it, hit the button, everyone will come to you (they jump). If your tank is ON the acid pad, jump to a different one and hit it.
4
5
6

Objects

(Objects - Will have any button that controls objects commonly used out of combat. Such as repair gear, get/use the flag, hail, etc.)

Repair - Repair your guild if you are:
- Near a Guild Mender
- Near a Mender
- Near a Mender bot
- There are a few others that are hard coded in, like the one in VP etc. If you have any other spots you want coded in let me know.
Get Flag - If near a Guild Strategist will hail and get a flag.
Use Flag - If near a Guild Strategist will hail and send you to the rally point.
Call GH - Calls to your Guild Hall.
Call Home - Calls to your home.
ClsWdw - Close top window. This hits ESC on all your computers.

Fly-Up - Will hold/release "Home" (to fly up on a flying mount).
Fly-Dn - Will hold/release "End" (to fly Down on a flying mount).
Mount - Toggles mount.
4
5
6

Zone - Clicks on most zones to instances.
Door 1 - When the option comes up of which zone to zone into, use this for option 1.
Door 2 - When the option comes up of which zone to zone into, use this for option 2.
Door X - When the option comes up of which zone to zone into, use this for option for an input box to enter which door number.
Special - Double click the nearest "Special" (as per radar) to everyone.
Run/Walk - Toggles run/walk

AReward - Accept Reward. When you finish a quest and the reward window pops up, this will accept it. Note: Make sure you can accept the reward, and it's not a choice reward.
Hail - Everyone will assist you, and hail your target
Opt 1-4 - While talking to an NPC (the bubble windows) everyone will do which conversation option as you press. Useful for shard quests.

Other Tab

Profile - ...
Main - Toggles opens/minimized the "main" window of the bot.
Zone Rst - Allows you to reset instance timers. The Zones window must be open on the main character in order for this to work.
ResStone - Casts a res stone (works for all priests).
TellWd - If the tell window has been used, it re-opens it.
Jump - Sends a Jump command through the uplink.

1
2
3
Disband - Drop group.
Auto Run - Toggle Auto run.
6

Load Bot - Loads the bot.
Dev Bot - Loads the development version of the bot.
End Bot - Ends the bot.
Camp - Camps everyone to desktop.
5
6

Load EXT - Load ISXOGRE
Unload EXT - Unload ISXOGRE
List IPs - Lists all the computers in the uplink.
Connect - Connects to the computers listed in EQ2Chars.xml
Disco - Disconnects to the computers listed in EQ2Chars.xml
6

List of commands

A - C

Command	Parameter & Description
AcceptReward	Allows options for choosing rewards where there are actually options.
	Parameter 1	ForWho
	Parameter 2	If the reward window has choices, which choice would you like? Leaving Parameter 2 blank or 0, will NOT touch a choice window.
Alias_AddEntry	Adds an entry into the Alias tab.
	Parameter 1	ForWho
	Parameter 2	Alias. Example: *Tank
	Parameter 3	Alias name: Example: Kannkor
Alias_ChangeEntryFor	Changes an entry into the Alias tab.
	Parameter 1	ForWho
	Parameter 2	Current alias name: Example: Kannkor
	Parameter 3	New alias name: Example: Primalz
Alias_ChangeEntryFor_InputWindow	Will give an input window to to change an alias entry
Alias_ChangeEntryFor_InputWindow	Parameter 1	NA
Alias_ChangeEntryAlias	Changes an entry into the Alias tab.
	Parameter 1	ForWho
	Parameter 2	Alias: Example: *Tank
	Parameter 3	New alias name: Example: Primalz
Alias_ChangeEntryAlias_InputWindow	Will give an input window to to change an alias entry
Alias_ChangeEntryAlias_InputWindow	Parameter 1	NA
AltarOfTheAncients	Clicks the Alter of the Ancients - ToT preorder clicky, has built in delay to allow you to get through the stun when stacking with other commands.
AltarOfTheAncients	Parameter 1	ForWho
Apply_Verb	Relay all the apply verb [Actor name] [case sensitive verb] Note: This is an advanced button.
	Parameter 1	Actor search string
	Parameter 2	Who will change their assist..
ApplyTempAdorn	Applies temporary adornments.
	Parameter 1	ForWho
	Parameter 2	AdornName
	Parameter 3	Slot : "Primary", "chest", or "Both".
	Notes	If you select your slot as "both" it will auto-determine the chest adorn, since there is only 1 at this time. If you want to select the chest adorn, then use the slot of "chest" and it will use the adornname passed. If AdornName is "auto": Fighters/Scouts use CB adorns If AdornName is "auto": Mages/Priest use Pot adorns
AReward	Accepts reward window. Note: can only be done on rewards that have no loot choice.
AReward	Parameters	N/A
ArcannaseEffigyOfRebirth	Clicks the Arcannase Effigy Of Rebirth - KA preorder clicky, has built in delay to allow you to get through the stun when stacking with other commands.
ArcannaseEffigyOfRebirth	Parameter 1	ForWho
Assist	Sets assists from parameters.
	Parameter 1	player to assist.
	Parameter 2	Who will change their assist..
Assist_InputWindow	Pops up an assist UI window.
Assist_InputWindow	Parameter 1	NA
AssistUI	Sets assists from a pop up UI.
AssistUI	Parameters	N/A
Assistx2	Sets assists for two toons from parameters.
	Parameter 1 and 3	player to assist.
	Parameter 2 and 4	Who will change their assist.
Assistx3	Sets assists for three toons from parameters.
	Parameter 1, 3 & 5	player to assist.
	Parameter 2, 4 & 6	Who will change their assist.
Assistx4	Sets assists for three toons from parameters.
	Parameter 1, 3, 5 & 7	player to assist.
	Parameter 2, 4, 6 & 8	Who will change their assist.
AutoRun	Presses the auto run key.
AutoRun	Parameters	N/A
AutoTarget_SetRescanTime	Changes the AutoTarget rescan time.
	Parameter 1	ForWho
	Parameter 2	New Value
	Examples	'!c -AutoTarget_SetRescanTime all 250' This would set scan time to 250 miliseconds.
AutoTarget_SetScanRadius	Changes the AutoTarget scan radius.
	Parameter 1	ForWho
	Parameter 2	New Value
	Examples	'!c -AutoTarget_SetScanRadius fighter 50' This would set any 'fighters' to 50 scan radius.
Call_GH	Calls to guild hall if not already in one.
Call_GH	Parameters	N/A
Camp	Night night time... Camp to desktop.
	Parameters	Default is FALSE. If set to TRUE, will camp you to login scene only.
	Examples	Current (unchanged) behaviour: !c -camp all Camps you to login then closes eq2. If passing the new parameter: !c -camp all TRUE Camps you to login only. (Doesn't close eq2).
Cancel_Cast..	Cancels current ability being cast then casts defined spell/ability Note: Abilities must be base names. Kick will work. Kick III will not.
	Parameter 1	ForWho
	Parameter 2	Spell to be cast.
Cancel_CastOn..	Cancels current ability being cast then casts defined spell/ability on specified character Note: Abilities must be base names. Kick will work. Kick III will not.
	Parameter 1	ForWho
	Parameter 2	Spell to be cast.
	Parameter 3	Cast spell on this player.
CancelMaintainedForWho	Cancels Maintained Ability, unlimited parameters
	Parameter 1	ForWho
	Parameter 2+ (Unlimited)	Ability Name to cancel
	Example	'!c -CancelMaintainedForWho fighter "SomeTankBuff Here" "SomePriestBuff here"' "Fighters" (Tanks) would cancel both of those if they existed, but priests would NOT cancel anything, because the ForWho failed.
CancelMaintained	Cancels Maintained Ability, unlimited parameters
CancelMaintained	Parameter 1+ (Unlimited)	Ability Name to cancel
Cast..	Tells [Bots] to cast a specific [ability]. Note: Abilities must be base names. Kick will work. Kick III will not.
	Parameter 1	Who should cast. Example All
	Parameter 2	Spell to be cast.
CastOn..	Tells [Bots] to cast a specific [ability] on specific toons. Note: Abilities must be base names. Kick will work. Kick III will not.
	Parameter 1	Who should cast. Example All
	Parameter 2	Spell to be cast.
	Parameter 3	Cast spell on this player.
CastAbilityOnNPC	<ForWho> <OgreCommand> <Paramaters>
CastAbilityOnNPC	Note:	*This one works a little differently. It will take ALL the parameters and pass them. So you can NOT stack this command. AbilityName MUST be a base name, like everything else. For example: Stone Hammer, or Evade (but not Evade VI, it will cast the highest version you have automatically). MobNameOrID - I highly recommend using ID when you can. This will handle mobs with the same name, and mobs with scary characters in their name, such as the dreaded coma. ${Target.ID} works really well for having someone cast it on your target. Likewise, you can do ${Actor[warden of nightmares].ID}. If they are unable to acquire the proper target, they will NOT cast the ability.
CastOn..x2	Tells [Bots] to cast a specific [ability] on specific toons. Note: Abilities must be base names. Kick will work. Kick III will not.
	Parameter 1 and 4	Who should cast. Example All
	Parameter 2 and 5	Spell to be cast.
	Parameter 3 and 6	Cast spell on this player.
CastOn..x3	Tells [Bots] to cast a specific [ability] on specific toons. Note: Abilities must be base names. Kick will work. Kick III will not.
	Parameter 1, 4 & 7	ForWho
	Parameter 2, 5 & 8	Spell to be cast.
	Parameter 3, 6 & 9	Cast spell on this player.
Castx2..	Tells [Bots] to cast a specific [ability]. Note: Abilities must be base names. Kick will work. Kick III will not.
	Parameter 1 and 3	Who should cast. Example All
	Parameter 2 and 4	Spell to be cast.
Change_Campspot	Relays a change to active campspots.
	Parameter 1	XCord
	Parameter 2	YCord
	Parameter 3	ZCord
ChangeCAListBoxItem	Changes a list box item on the CA tab only.
	Parameter 1	Who to change.
	Parameter 2	Ability name.
	Parameter 3	True, False or Toggle.
ChangeCAListBoxItemx2	Changes a list box item on the CA tab only.
	Parameter 1 and 4	Who to change.
	Parameter 2 and 5	Ability name.
	Parameter 3 and 6	TRUE or FALSE (case sensitive).
ChangeCAListBoxItemx5	Changes a list box item on the CA tab only.
	Parameter 1, 4, 7, 10 and 13	Who to change.
	Parameter 2, 5, 8, 11 and 14	Ability name.
	Parameter 3, 6, 9, 12 and 15	TRUE or FALSE (case sensitive).
ChangeCastStackListBoxItemByTag	Changes cast stack by custom tags
	Parameter 1	ForWho
	Parameter 2	Tag name
	Parameter 3	Status: TRUE, FALSE, or TOGGLE. TRUE ensures the entry is ON. FALSE makes sure the entry is OFF. TOGGLE... well toggles it.
	Parameter 4	Partial string match. TRUE or FALSE (case sensitive). This is FALSE by default, which means exact match only. If FALSE, exact match only. "manadrain" has to equal "manadrain". "Dispellmanadrain" would NOT be modified if "manadrain" was passed. If TRUE, partial matches are fine. "Dispellmanadrain" would be modified if "manadrain" was passed.
	Parameter 5	Silent mode. TRUE or FALSE (case sensitive). FALSE by default. If set to TRUE, it will not output any text to OgreConsole when an entry is modified.
ChangeLootOptions	Changes the loot options. Thanks to uiywtf for the original code.
	Parameter 1	ForWho - the person to change the loot options on.
	Parameter 2	Arguements that can be applied: only one from each group may be applied
	Arguments Group 1	Looting Method LO - Leader Only FFA - Free For All Lotto - Lotto NBG - Need Before Greed RR - Round Robin
	Arguments Group 2	Item Rarity All T - Treasured L - Legendary F - Fabled
	Arguments Group 3	Yell Access YL - Leader Only YA - Yell Anyone
	Arguments Group 4	Encounter Lock Access ELL - Encounter Leader Only ELA - Encounter Lock Anyone
	Arguments Group 5	Autolock Encounters AL - Autolock (checked) NAL - No Autolock (unchecked)
	Arguments Group 6	Auto Loot Mode AN - Auto None AG - Auto Greed AD - Auto Decline
	Example	'ChangeLootOptions all LO' Changes loot options to Leader only. Doesn't modify any other option. -ChangeLootOptions all FFA Changes loot options to Free for All. Doesn't modify any other option. -ChangeLootOptions all NBG T YA AN Would change loot to: Need before greed, Treasured+ items, Yell access to anyone, and "None" for Auto Loot mode.
ChangeNamedCAListBoxItem	Changes a list box item on the Named CA tab only.
	Parameter 1	Who to change.
	Parameter 2	Ability name.
	Parameter 3	True, False or Toggle
ChangeNamedCAListBoxItemx2	Changes a list box item on the Named CA tab only.
	Parameter 1 and 4	Who to change.
	Parameter 2 and 5	Ability name.
	Parameter 3 and 6	TRUE or FALSE (case sensitive).
ChangeNamedCAListBoxItemx5	Changes a list box item on the Named CA tab only.
	Parameter 1, 4, 7, 10 and 13	Who to change.
	Parameter 2, 5, 8, 11 and 14	Ability name.
	Parameter 3, 6, 9, 12 and 15	TRUE or FALSE (case sensitive).
ChangeOgreBotUIOption	...
	Parameter 1	ForWho, such as: all
	Parameter 2	Name of object: checkbox_ascension_glacialfreeze_noraidcomboing
	Parameter 3	Value to change it too: TRUE, FALSE, or Toggle.
Change_Campspot_Who (x2, x3, x4)	Changes campspot for specific toons. For x2/x3/x4 just repeats itself
	Parameter 1	ForWho
	Parameter 2	X coord
	Parameter 3	Y coord
	Parameter 4	Z coord
ChangePriorityListBoxItem	Changes a list box item on the Priority tab only.
	Parameter 1	Who to change.
	Parameter 2	Ability name.
	Parameter 3	True, False or Toggle
ChangePriorityListBoxItemx2	Changes a list box item on the Priority tab only.
	Parameter 1 and 4	Who to change.
	Parameter 2 and 5	Ability name.
	Parameter 3 and 6	TRUE or FALSE (case sensitive).
ChangePriorityListBoxItemx5	Changes a list box item on the Priority tab only.
	Parameter 1, 4, 7, 10 and 13	Who to change.
	Parameter 2, 5, 8, 11 and 14	Ability name.
	Parameter 3, 6, 9, 12 and 15	TRUE or FALSE (case sensitive).
ChangeRadarYAxis	Changes the Radar Y Axis.
	Parameter 1	Who to change.
	Parameter 2	Value. TRUE for on, FALSE for off.
CheckGear	Reports gear conditions.
CheckGear	Parameters	N/A
CheckResearch	Checks your research.
	Parameter 1	ForWho
	Parameter 2	Report all. Default: FALSE By default this will only report people who have completed their research. If you want to see all data pass TRUE.
	Example	'!c -CheckResearch all TRUE' Research: Kannkor --> Complete. Research: Primalz --> 5 days and 21 hours remaining.
ClsWdw	Close Window. Closes the top most window in the game.
ClsWdw	Parameters	N/A
CmpSpot	Bring up the options for Campspot.
CmpSpot	Parameters	N/A
Come2Me	Tells [Bots] to move to a specific [player].
	Parameter 1	player to move too.
	Parameter 2	Who should move. Example All
	Parameter 3	Precision. Default is 3.
Connect	Connect to other computers that are in your eq2chars file.
Connect	Parameters	N/A
CoV	Uses the loyalty reward "Call of the Veteran" teleport item.
	Parameter 1	ForWho
	Parameter 2	Travel Option Valid options are: Teleport or Summon. (Same as they are labeled on the window)
	Parameter 3	Toon Name to interact with. If you choose Teleport, to who? If you choose Summon, who?
	Parameter 4	Allow Same Zone. Default FALSE. Most of the time you won't want people within the same zone, using CoV, so this is off by default. Pass it "TRUE" to allow it to use CoV within the same zone.
CoV_InputWindow	Uses the loyalty reward "Call of the Veteran" teleport item. Same as above, but opens input box (a pop up box) that you have to type the options into.
Crouch	Simply presses "z" which is the default. If you've changed this... it'll still press z..
Crouch	Parameter 1	N/A
CS-Dft	Sets campspot. using default camp spot options
CS-Dft	Parameter 1	Who will camp spot.
CheckKunarkAscendingRequirements	Will report back any quests that you are missing for Kunark Ascending signature request line requirements.
CheckKunarkAscendingRequirements	Example of a toon missing everything:	Checking Kunark Ascending Requirements... Missing Dragon languge: To Speak as a Dragon Missing Satharin language: Feathers For Sethis Missing Goblin language: Claiming the Goblish Tongue Missing Greenmist Heritage: The Triumph of Fear Missing ToT Signature Questline: Underdepths Saga: Chaos and Malice Missing Epic 1.0 quest. Completed checking Kunark Ascending Requirements!
CurePotions_Replenish	Replenishes your cure potions.
	Parameter 1	ForWho
	Parameter 2	CurePotionName Built In Options: All - Will get all four types. Arcane, Trauma, Noxious, Elemental. Which potions will depend on which ones are the latest. As of right now, it's 'Abyssal ____ Remedy'. I will keep this updated as time goes on. Arcane - This will get the latest Arcane, right now it's 'Abyssal Arcane Remedy'. Noxious - This will get the latest Noxious, right now it's 'Abyssal Noxious Remedy'. Elemental - This will get the latest Elemental, right now it's 'Abyssal Elemental Remedy'. Trauma - This will get the latest Trauma, right now it's 'Abyssal Trauma Remedy'.
CS-JO-JI	[C]amp[S]pot default (everyone). [J]oust [O]ff default (Mages and priests). [J]oust [I]n (melee)</Setting>
	Parameter 1	Campspot ForWho</Setting>
	Parameter 2	Who should joust off</Setting>
CS_Set_Formation_Circle	Sets everyone up in a big circle.
	Parameter 1	ForWho. Example: all
	Parameter 2	Distance from the Center. Example: 10
	Parameter 3	X. Example: ${Me.X}
	Parameter 4	Y. Example: ${Me.Y}
	Parameter 5	Z. Example: ${Me.Z}
	Parameter 6	Use Relatively campspot. Default is FALSE. (Has to be capital TRUE or FALSE).
CS_Set_Formation_MonkeyInMiddle	Sets everyone up in a big circle, with 1 person in the middle.
	Parameter 1	ForWho. Example: all
	Parameter 2	Distance from the Center. Example: 10
	Parameter 3	X. Example: ${Me.X}
	Parameter 4	Y. Example: ${Me.Y}
	Parameter 5	Z. Example: ${Me.Z}
	Parameter 6	Monkey. Who is in the middle? Example: ${Me.Name}
	Parameter 7	Use Relatively campspot. Default is FALSE. (Has to be capital TRUE or FALSE).

D - J

Command	Parameter & Description
Deity_Spend	Used to spend diety points, thanks to DBG no longer needed.
	Parameter 1	ForWho
	Parameter 2	Value : Auto, CB, Pot, Stam. Auto: For Tanks will spend a point in the order of: Stam -> CB -> Pot. For non-Tanks will spend a point in the order of: CB -> Pot -> Stam.
	Parameter 3	How many points do you want to spend? If omitted, will default to 1 (no change in behaviour). For most people, you will just want to put 10 and be done with it. This means when you press the button, it will spend all of your deity points.
DeleteQuest	Will delete a quest.
	Parameter 1	ForWho. If all, will be groupleader.
	Parameter 2	Quest name.
DeleteQuest_InputWindow	Will delete a quest, uses input window
	Parameter 1	ForWho. If all, will be groupleader.
	Parameter 2	Quest name.
Dev_Bot	Loads Development version of Ogre Bot.
Dev_Bot	Parameters	N/A
Disband	Disband Disband your group.
Disband	Parameters	N/A
Discon	Disconnect to other computers that are in your eq2chars file.
Discon	Parameters	N/A
DisplayEtherealMissionInfo	Will display current mission info on-demand to OgreConsole.
DisplayEtherealMissionInfo	Parameter 1	ForWho
DM_Cancel	Cancels the rating window for Dungeon Maker
DM_Cancel	Parameters	N/A
Doljon_End	Ends the Lord Doljon script.
Doljon_End	Parameters	N/A
Doljon_Ld	Loads the Lord Doljon script.
Doljon_Ld	Parameters	N/A
Dol-To-Me	Lord Doljon Move to me command.
Dol-To-Me	Parameters	N/A
Door	When zoning and you have the option to select which zone this will select the one you use as a parameter. Note: curently not working
Door	Parameter 1	option to choose.
DoorForWho	When zoning and you have the option to select which zone this will select the one you use as a parameter.
	Parameter 1	ForWho
	Parameter 2	Door #
DoorX	When zoning and you have the option to select which zone this will bring up door ui and allow you to select the one you use as a parameter. Note: curently not working
DoorX	Parameters	N/A
DoV_RaidDebuff	Casts the raid debuff
	Parameter 1	Who to cast.
	Parameter 2	ID or name of who to cast the debuff on. Note: If you use ALL - everyone will cast it.
End_Bot	Ends Ogre Bot. Works on any version of Ogrebot [Release or development build].
End_Bot	Parameters	N/A
End_Script_Relay	Ends a script
End_Script_Relay	Parameter 1	script to end
EndScriptRequiresOgreBot	Ends a script. Takes infinite parameters, but requires 2 parameters. Also requires OgreBot to be running.
	Parameter 1	ForWho
	Parameter 2	Scriptname
Evac	Anyone with an evacuate ability will use it.
Evac	Parameters	N/A
ExecuteAtom	Relays an OgreBotAtom...
	Parameter 1	ForWho
	Parameter 2	AtomName
	Parameter 3-11	Params
F-Follow	Does a Force follow as per what is set in OgreBot.
F-Follow	Parameters	N/A
Fly-Dn	Presses or releases the fly down [or swim down] button. Note: Will continue until pressed again. Think of it as autorun for flying (or swimming)up/down
Fly-Dn	Parameters	N/A
Fly-Up	Presses or releases the fly up [or swim up] button. Note: Will continue until pressed again. Think of it as autorun for flying (or swimming)up/down
Fly-Up	Parameters	N/A
Force_MountOn	This will recast your mount, regardless if you have it on or not, and you will end up on your mount! (Just don't move for a few seconds while it does it's thing and interrupt it). Thanks Saha for the initial code.
Force_MountOn	Parameters	ForWho
Get_Flag	Gets a flag from a guild strategist.
Get_Flag	Parameters	N/A
GuidedAscension	Uses Guided Ascension Scrolls
	Parameter 1	ForWho Default is All
	Parameter 2	Must have less than this much vitality to consume scroll. Default: 3000000 (3 million)
Hail	Everyone will assist you and hail your target.
Hail	Parameters	N/A
Hail_NPC	Hails NPC, allowable over IRC now
	Parameter 1	ForWho
	Parameter 2	Target name or ID. ${Target.ID}
Heartstone_RekindleBond	Rekindles Heartstone. Note: You must be quite close to it.
Heartstone_RekindleBond	Parameter 1	ForWho
HoldUp	This button turns auto follow off.
HoldUp	Parameter 1	Command for who? Default All
HQEar	Will use the HQEar on-demand, regardless if the bot just casted it.
HQEar	Parameters	ForWho
Imm-Res	Uses Cleric AA Immaculate Revival if X people are dead. Note: Will always cast if a priest or fighter is dead.
Imm-Res	Parameter 1	Threshold of how many currently dead before casting.
InjectChat	Injects chat as if it were sent via /raidsay In theory, you should be able to put anything here you want, and any script monitoring in-game chat, would see this message as if it was said in raid chat. e.g.: You could make: set up for bj ____ buttons using this.
	Parameter 1	CommandForWho, example: all
	Parameter 2	Entire chat message to inject as if it was said in raid, example: "set up for dagrin"
Inviter	Staggers invites to group/raid members, and allows them a short opportunity to accept before continuing on.
	Parameter1	-inviter <toonname> This is the toon who will be DOING the inviting. If not specified, uses the person who pressed the button.
	Parameter2	-r <toonname> **This does a RAID invite to the toonname.
	Parameter3	<toonname> **A toon to group invite.
	Example	I hit the MCP button on a toon called 'Kannkor', and it has the following parameters. primalz eq2bob -r saha -inviter saha blowupdoll The following happens, in this order: Kannkor group invites primalz Kannkor group invites eq2bob Kannkor raid invites saha Saha group invites blowupdoll The "-inviter saha" told the script to change the inviting over to saha, instead of Kannkor. Which is why it started inviting on saha.
ItemDB	Loads Ogre Item Database. Which is used to help keep track of who has what item. Note: This is in Early Development still.
ItemDB	Parameters	N/A
Jst-In	Joust In. When campspot is turned on you will joust In (if permitted).
Jst-In	Parameter 1	Command for who? Default All
Jst-In-Who	Joust In. When campspot is turned on you will joust In (if permitted).
Jst-In-Who	Parameter 1	Who will Joust In
Jst-Off	Joust Off. Brings up input box to tell certain classes or people they are not permitted to joust in.
Jst-Off	Parameters	N/A
Jst-Off-Who	Same as Jst-Off, but takes a parameter.
Jst-Off-Who	Parameter 1	Who will not joust in on command.
Jst-On	Opposite of Jst-Off - reverses the effects of Jst-Off. DOES NOT JOUST IN.
Jst-On	Parameters	N/A
Jst-On-Who	Same as Jst-On, but takes a parameter.
Jst-On-Who	Parameter 1	Who will have joust in enabled when commanded.
Jst-Out	Joust Out. When campspot is turned on you will joust out (if permitted).
Jst-Out	Parameter 1	Command for who? Default All
Jst-Out-Who	Joust Out. When campspot is turned on you will joust out (if permitted).
Jst-Out-Who	Parameter 1	Who will Joust out
Jump	Sends jump key to all clents
Jump	Parameters	N/A

L - P

Command	Parameter & Description
LetsGo	This button removes movement restrictions such as HoldUp and campspot.
LetsGo	Parameter1	Command for who? Default All
List_IPs	List any computers connected via the uplink.
List_IPs	Parameters	N/A
LoadAutoTargetList_InputWindow	These options pop up input windows for you to enter in the AutoTarget list you want to load.
LoadAutoTargetList_InputWindow	Parameter 1	NA
LoadAutoTargetListForWho	Loads an AutoTarget List for a specific toon
	Parameter 1	List to load.
	Parameter 2	Who should load the list.
Load_Bot	Loads Ogre Bot.
Load_Bot	Parameters	N/A
Load_Ext	Loads ISXOgre.
Load_Ext	Parameters	N/A
Main	Toggles the main window. Same as pressing Show Main or Hide Main.
Main	Parameters	N/A
MakeLeader	Changes the group leader.
	Parameter 1	ForWho
	Parameter 2	Make who the leader. Defaults to the person pressing the button if left blank.
Mentor	Accepts 1 parameter, toonname to mentor.
Mentor	Parameters	N/A
Mount	Clicks the mount ability. If you have a mount it will cancel it. If you do not have a mount it will summon it.
Mount	Parameters	N/A
Mount On	This will recast your mount, regardless if you have it on or not, and you will end up on your mount! (Just don't move for a few seconds while it does it's thing and interrupt it). Thanks Saha for the initial code.
Mount On	Parameter 1	ForWho
Move2Area	Tells [Bots] to move to a specific [player].
	Parameter 1	XCord
	Parameter 2	YCord.
	Parameter 3	ForWho Default is All
	Parameter 4	Precision. Default is 3.
NoMove	Prevents incombat movement such as move into melee range and move behind. Note:Use LetsGo to clear the NoMove flag.
NoMove	Parameters	N/A
NoTarget	Clears everyones target.
NoTarget	Parameters	N/A
OFol---	Decreases the distance of OgreFollow.
OFol---	Parameters	N/A
OFol-++	Increases the distance of OgreFollow.
OFol-++	Parameters	N/A
OFol-Dft	Ogre Follow using default settings (no input box).
	Parameter1	ForWho Should Follow
	Parameter2	ForWho to follow
	Parameter3	Min Distance. Default 8
	Parameter4	Max Distance. Default 100
	Parameter5	Break on follow. Default FALSE
OFollow	Brings up the input box options for OgreFollow.
OFollow	Parameters	N/A
Ogre_Command	Local ogre command...
	Parameter 1	ogre command
	Parameter 2 to 11	Parameters
Ogre_CommandRelay	relay all ogre command...
	Parameter 1	ogre command
	Parameter 2 to 11	Parameters
Ogre_CommandRequiresOgreBot_AllParams	<ForWho> <OgreCommand> <Paramaters>
Ogre_CommandRequiresOgreBot_AllParams	Note:	This one works a little differently. It will take ALL the parameters and pass them. So you can NOT stack this command.
OgreBotAtom	Executes an atom if Ogrebot is loaded. Note: Does NOT relay the command.
	Parameter 1	atom name. Case sensitive.
	Parameter 2-11	Parameters
OgreBotAtomRelay	Executes an atom if Ogrebot is loaded. Note: Does relay the command.
	Parameter 1	atom name. Case sensitive.
	Parameter 2-11	Parameters
OgreConsole_Show	Echos if OgreConsole is opened or hidden.
OgreConsole_Show	Parameter 1	TRUE or FALSE. If TRUE OgreConsole is opened. If FALSE OgreConsole is hidden.
OgreConsole_ShowRequiresOgreBot	Echos if OgreConsole is opened or hidden. This requires OgreBot to be running, because that is where 'ForWho' is resolved.
	Parameter 1	ForWho
	Parameter 2	TRUE or FALSE. If TRUE OgreConsole is opened. If FALSE OgreConsole is hidden.
OgreCraft_AddLastScribedRecipe	During a session, OgreCraft will try to keep track of the last recipe you have scribed. During a 'session' means if you close ogre craft down, it will no longer remember the last scribed ability. Intended usage: Get a quest that gives you 1 recipe book. Then you click 'OgreCraft_ScribeRecipe', then you click 'AddLastScribedRecipe'. Makes questing easy!
	Parameter 1	ForWho Default: all
	Parameter 2	Quantity. Default 1.
OgreCraft_AddRecipe_InputWindow	Will pop open options to add recipes.
OgreCraft_AddRecipe_InputWindow	Parameter 1	ForWho Only all and 'toonname' are only options at this time!
OgreCraft_CraftQueue	Will craft all recipes currently in the que.
OgreCraft_CraftQueue	Parameter 1	ForWho
OgreCraft_ScribeRecipe	During a session, OgreCraft will try to keep track of the last recipe you have scribed. During a 'session' means if you close ogre craft down, it will no longer remember the last scribed ability. Intended usage: Get a quest that gives you 1 recipe book. Then you click 'OgreCraft_ScribeRecipe', then you click 'AddLastScribedRecipe'. Makes questing easy!
	Parameter 1	ForWho Default: all
	Parameter 2	Quantity. Default all.
	Example	'OgreCraft:ScribeRecipe' Would scribe all recipes 'OgreCraft:ScribeRecipe all "Random Recipe Name"' Would scribe the "Random Recipe Name" book
OgreIRC	Sends a message or command to OgreIRC
OgreIRC	Parameter 1 to 100	OgreIRC Commands and paramters
Opt_Num	After hailing you can use this to converse with an NPC.
Opt_Num	Parameter 1	chat option to choose.
Pause	Pauses all the bots.
Pause	Parameters	N/A
Pause_ForWho	Pauses specific or type specific bot.
Pause_ForWho	Parameters	N/A
Pet_Off	Everyone does a pet back off command.
Pet_Off	Parameters	N/A
Poison_AutoConsume	Auto Consume Options for Poisons.
	Parameter 1	ForWho. Who will modify AutoConsume.
	Parameter 2	Option. Possibilities are: TRUE, FALSE, TOGGLE, and REPORT
	Parameter 3	Poison Name. You can leave this blank if you want to use the defaults that are hard coded.
Poison_Replenish	Auto Consume Options for Poisons.
	Parameter 1	ForWho. Who will Replenish.
	Parameter 2	Poison Name. You can leave this blank if you want to use the defaults that are hard coded.
Portal_To_Guild	Relays to use Magic Door to Guild Hall
Portal_To_Guild	Parameters	N/A
Profile_InputWindow	Loads a profile from a pop up UI. (Formerly 'Profile')
Profile_InputWindow	Parameters	N/A
ProvingGrounds_Exit	Exits Proving Grounds If in a match will exit the match. If in the lobby will exit the lobby.
ProvingGrounds_Exit	Parameters	ForWho
ProvingGrounds_Scoreboard_Close	When you complete a proving grounds and get the scoreboard up, this will close it.
ProvingGrounds_Scoreboard_Close	Parameters	ForWho

R - Z

Command	Parameter & Description
RawCommand	Executes in the console
	Example 1: Would load ogre idol Parameter 1 - ogre Parameter 2 - idol
	Example 2: Have everyone's pet attack Parameter 1 - relay Parameter 2 - all Parameter 3 - eq2execute Parameter 4 - pet attack (Note: You do not need the / before /pet attack)
	parameter 1 - 11	Note: It will pass 10 parameters. NULL for any not filled in. This must be handled by the script.
Rebuff	Cancels all your maintained abilities that appear in your spellbook.
Rebuff	Parameters	ForWho
RedeemKrono	Redeems/uses a krono... Note that -consumekrono still works but is phased out to the new phrasing
RedeemKrono	Parameters	ForWho
RelayRunScript	relay all - Runs a script. Note: It will pass 10 parameters. NULL for any not filled in. This must be handled by the script.
	parameter 1	relay to: [All - All Other - IS1]
	Parameter 2	Scriptname
	Parameter 3-12	Parameters for script
ReLd_Bot	Reloads Ogre Bot.
ReLd_Bot	Parameters	N/A
Repair	Uses a repairer or repair bot.
Repair	Parameters	N/A
Res	Removes the temporary [Stop Res] flag.
Res	Parameters	N/A
ResStone	All priests will cast their resurrection stone..
ResStone	Parameters	N/A
Resume	Resumes all the bots.
Resume	Parameters	N/A
Resume_ForWho	Resumes specific or type specific bot.
Resume_ForWho	Parameters	N/A
Revive	First and foremost - stop dying. This button presses the revive button. WARNING It does NOT take your selection into consideration. Update Ogrebot will now try to select the first option in the list (which is kind of default selected, but doesn't actually do anything).
Revive	Parameters	N/A
Run_Walk	Toggles run.
Run_Walk	Parameters	N/A
RunScript	Runs a script (no relay). Note: It will pass 10 parameters. NULL for any not filled in. This must be handled by the script.
	parameter 1	Scriptname
	Parameter 2-11	Parameters for script
RunScriptRequiresOgreBot	Runs a script. Takes infinite parameters, but requires 2 parameters. Also requires OgreBot to be running.
	Parameter 1	ForWho
	Parameter 2	Scriptname
	Parameter 3+	Additional script dependant parameters
RunScriptRequiresOgreBot_AllParams	<ForWho> <OgreCommand> <Paramaters>
RunScriptRequiresOgreBot_AllParams	Note:	This one works a little differently. It will take ALL the parameters and pass them. So you can NOT stack this command.
ScrollOf	Uses scrolls based off of the parameters you set.
	Parameter 1	ForWho
	Parameter 2	Scroll name. Default is "Prowess" Base names Scroll of Prowess Scroll of Pain Scroll of Pure Power Aliases: Prowess Pain Power
	Parameter 3	If duration in minutes is < this value, cancel the scroll first. Leave blank or 0 to disable.
	Examples	'!c -ScrollOf all Prowess" Everyone would use a Scroll of Prowess. '!c -Scrollof priest pain' Priests would use a Scroll of Pain.
	Notes	Will auto-determine if you need to scribe the ability first, or if you can just use it. Error reporting to Ogre Console on failure. For best results, use only Thaumic scrolls. For example: Thaumic Scroll of Prowess. At this time, you must use a base name or alias.
SetUpFor___	Sends a "set up for ___" command.
	Parameter 1	ForWho
	Parameter 2	Name of the mob to set up for, example: dagrin
	Example	'set up for dagrin' would be send to all
SetUpFor__InputWindow	Will give an input window to put in the name of the set up
SetUpFor__InputWindow	Parameter 1	NA
ShareAllMissions	Shares every mission quest you have, regardless of which zone you are in.
ShareAllMissions	Parameter 1	ForWho All in this instance would default to the Group Leader
ShareMission	ShareMission will ONLY share a quest that is labeled a mission with the group.
	Parameter 1	ForWho. If all, will be groupleader.
	Parameter 2	Quest name. At this time because OgreConsole removes comma's, any quest with a comma in it, won't work.
ShareMission_InputWindow	ShareQuest will try to share any quest you give it to the group. Pops an input window up.
ShareMission_InputWindow	Parameter 1	ForWho. If all, will be groupleader.
ShareQuest	ShareQuest will try to share any quest you give it to the group.
	Parameter 1	ForWho. If all, will be groupleader.
	Parameter 2	Quest Name
ShareQuest_InputWindow	ShareQuest will try to share any quest you give it to the group. Pops an input window up.
ShareQuest_InputWindow	Parameter 1	ForWho. If all, will be groupleader.
ShareQuestsForZone	Sharesquests for your current zone. If <ForWho> is left blank (all), the GroupLeader will only share. If you specify a name, that person will share regardless if they are group leader or not.
ShareQuestsForZone	Parameter 1	ForWho
Show_Available_Set_ups	Shows Setups associated with the current zone.
Show_Available_Set_ups	Parameters	N/A
Special	Clicks the nearest special.
Special	Parameters	N/A
Special_ZoneSpecific	This will handle clicking of zone specific items. Such as the zipline in Brokenskull Bay: Hoist the Yellow Jack? [Heroic]
Special_ZoneSpecific	Parameters	N/A
Spewstats	Sends various information to Ogre Console or OgreIRC depending on parameters you set. To get a list in OgreConsole: !c -spewstats all help
	Parameter 1	ForWho
	Parameter 2	Potency CB Resolve Ascension ascension_scrolls faction_<factionname> please note this takes 2-10 seconds on average to process faction results Aeauto (Thanks to uiywtf) Reuse (Thanks to uiywtf) Cast (Thanks to uiywtf) item_itemnamehere (Only checks inventory. Not equipped or bank etc.) Full list available by using '!c -spewstats all help' in the Ogre console
	OgreConsole Examples	-spewstats all "item_guided ascension" Kannkor --> has item: guided ascension -> 26 -spewstats all "item_earring of the icelord" Kannkor --> has item: earring of the icelord '!c all -spewstat all aeauto -spewstat all cast -spewstat all reuse' Primalz --> AEAuto: 102.1% Primalz --> Cast: 104.3% Primalz --> Reuse: 98.7% Kannkor --> AEAuto: 100.5% Kannkor --> Cast: 119.3% Kannkor --> Reuse: 102.3% '!c -Spewstats ${Me.Name} Ascension' Kannkor --> Ascension: Level 1 Thaumaturgist. 87.8% into level. Vitality remaining: 213210 Scrolls:3 '!c -Spewstats ${Me.Name} Ascension_vit' Kannkor --> Ascension Vitality Remaining: 213210 '!c -Spewstats ${Me.Name} Ascension_exp' Kannkor --> Ascension Exp: 2632790 of 3000000 - 87.8% '!c -Spewstats all "currency_Loyalty Point Token"' Kannkor --> Loyalty Point Token --> 1733 Primalz --> Loyalty Point Token --> 1505 LittleOgress --> Loyalty Point Token --> 1683 KannkorWarlock --> Loyalty Point Token --> 1521 '!c -Spewstats Mage Resolve IRC' in #DecoratorzIRC 08:51:46: Kannkor_IRC: !c me -spewstats shaman resolve irc 08:51:47: Kannkor_IRC: Kannkor --> Resolve: 272 08:51:47: Kannkor_IRC: Primalz --> Resolve: 268 '!c -SpewStat all "faction_Claws of Veeshan"' Toon1 --> Claws of Veeshan --> 50000 ( ally ) Toon2 --> Claws of Veeshan --> 12825 ( amiably ) Example: If a faction is not found. '!c -SpewStat all "faction_primalz faction"' Toon1 --> primalz faction --> Not found.
StopRes	Sets a temporary Stop Res.
StopRes	Parameters	N/A
Summon_Familiar	Summons your familiar
Summon_Familiar	Parameters	ForWho
Target___	Relays a target command Partial search string. Special 'me' can be used to specify the player.
	parameter 1	ForWho
	Parameter 2	Target Name
Target___x2	Relays two target commands Note:Partial search string. Special 'me' can be used to specify the player.
	parameter 1 and 3	[[ForWho\|ForWho]
	Parameter 2 and 4	Target Name
TellWD	Shows the tell window if you have received a tell and closed the window down.
TellWD	Parameters	N/A
Test	Button for Kannkor to test things.
Test	Parameters	N/A
Timer	This is the internal tool Ogrebot uses for displaying raid/grind timers on screen. You can now add them too without any fuss!
	Parameter 1	ForWho
	Parameter 2	Timer in seconds.
	Parameter 3	Slot #. Valid options 1 to 10.
	Parameter 4	Message.
	Notes	You should NOT use these on mobs that have raid/grind options (or turn off raid/grind options first). Or at the very least, use the later numbers first. Ogrebot raid options always works from 1-#, depending on how many it needs. If you want to add your own timers, use 10-#, counting up. Example, you wanted to add 3, you would use 8, 9, and 10. Timers are automatically removed 5 seconds after the timer has expired. Timers can be updated, even if the timer hasn't expired. If anyone is using these and wants more functionality send me a PM and we can discuss. There are more options available but I was trying to keep the API simple. You can use these in scripts also. When you want a timer, "oc !c -timer" (you can add your parameters).
Trak-HUD	Displays or removes the Trakanon HUD. Display 1 - Distance from Orb Display 2 - Nearest PC and distance
Trak-HUD	Parameters	N/A
Travel	Travel refers to the "Fast Travel" map. This is when you click on a bell, druid portal, wizard spires, etc. Note: This does NOT open the Fast Travel map. It must already be open.
	Parameter 1	ForWho
	Parameter 2	ToWhere
	Parameter 3	Exact Match : TRUE (must be exact) or FALSE (partial match)
	Example	'-Travel all Qeynos' Anyone who has a Fast Travel window open, will go to Qeynos. '-Travel all Commonlands TRUE' Anyone who has a Fast Travel window open, will go to Qeynos. '-Travel Fighter commonlands' All fighters would go to The Commonlands.
TravelHelper	Opens a UI with various travel options, i.e Fast Travel, Wizard Spire, Bell. And sends travel commands to team members.
	1
	2
	3
	Example
Travel_InputWindow	Pops open the input window system to ask you to type in where you would like to go.
Travel_InputWindow	Parameters	N/A
Travel_Bell_InputWindow	Pops open the input window system to ask you to type in where you would like to go.
Travel_Bell_InputWindow	Parameters	N/A
Travel_Druid_InputWindow	Pops open the input window system to ask you to type in where you would like to go.
Travel_Druid_InputWindow	Parameters	N/A
Travel_Spires_InputWindow	Pops open the input window system to ask you to type in where you would like to go.
Travel_Spires_InputWindow	Parameters	N/A
TravelBell	Attempts to click on a bell near you, then does the Travel.
	Parameter 1	ForWho
	Parameter 2	ToWhere
	Parameter 3	Exact Match : TRUE (must be exact) or FALSE (partial match) Default is FALSE
TravelDruid	Attempts to click on a druid bush/guild hall druid dude near you, then does the Travel.
	Parameter 1	ForWho
	Parameter 2	ToWhere
	Parameter 3	Exact Match : TRUE (must be exact) or FALSE (partial match) Default is FALSE
TravelSpires	Attempts to click on a Ulteran Spires (Wizard portal) near you, then does the Travel. This will now work in PoM on the teleporter pads.
	Parameter 1	ForWho
	Parameter 2	ToWhere
	Parameter 3	Exact Match : TRUE (must be exact) or FALSE (partial match) Default is FALSE
Turt-HUD	Displays or removes the Turtles HUD [for the Tert raid encounter in Kraytoc]. Display 1 - Right - Health - Distance Display 2 - Left - Health - Distance
Turt-HUD	Parameters	N/A
Unload_Ext	Unloads ISXOgre.
Unload_Ext	Parameters	N/A
Unmentor	Unmentors everyone.
Unmentor	Parameters	N/A
Uplinkoption_change	Changes a checkbox to checked (TRUE) or unchecked (FALSE) or Toggle Example: This will turn on Ignore NPC HP 100% for everyone param 1 = All Param 2 = checkbox_settings_ignoretargettoattackhealthcheck Param 3 = TRUE
	param 1	ForWho
	Param 2	Name of object to change (obtained via xml files - path to your \InnerSpace\Scripts\EQ2OgreBot\UplinkControllerXML.xml)
	Param 3	Value to change to. Note: TRUE is not the same as true.
Uplinkoption_changex2	Changes a UI option
	param 1 and 4	ForWho
	Param 2 and 5	Name of object to change (obtained via xml files - path to your \InnerSpace\Scripts\EQ2OgreBot\UplinkControllerXML.xml)
	Param 3 and 6	Value to change to. Note: TRUE is not the same as true.
Uplinkoption_changex6	Changes a UI option
	params 1-4-7-10-13-16	ForWho
	Param 2-5-8-11-14-17	Name of object to change (obtained via xml files)
	Param 3-6-9-12-15-18	Value to change to. Note: TRUE is not the same as true.
Use_Flag	Uses a flag from a guild strategist.
Use_Flag	Parameters	N/A
UseItem..	Tells [Bots] to Use a specific [Item]. Checks equipped gear first, then inventory. Note - Item names must be exact.
	Parameter 1	Who should use. Example All
	Parameter 2	Item to be used.
UseItem x2	Tells [Bots] to Use a specific [Item]. Checks equipped gear first, then inventory. Note - Item names must be exact.
	Parameters 1 and 3	Who should use.
	Parameters 2 and 4	Item to be used.
UseItem x4	Tells [Bots] to Use a specific [Item]. Checks equipped gear first, then inventory. Note - Item names must be exact.
	Parameters 1, 3, 5 and 7	Who should use.
	Parameters 2, 4, 6 and 8	Item to be used.
UseItem_InputWindow	Pops up a window for you to input the name of the item you would like to use
UseItem_InputWindow	Parameters	N/A
UseItemOn..	Tells [Bots] to Use a specific [Item]. Checks equipped gear first, then inventory. Note - Item names must be exact.
	parameter 1	Who should use. Example All
	Parameter 2	Item to be used.
	Parameter 3	Use item on this player.
WarMyth	Toggles Warlock Mythical ability.
WarMyth	Parameters	N/A
Zone	Will attempt to zone you.
Zone	Parameters	N/A
ZoneDoor	Chooses door option for all based on parameter
	Parameter 1	Name or slot number
	Example	'!c -ZoneDoor "Obulus Frontier 2"' This will zone all into Obulus Frontier 2. Names must match exactly.
ZoneDoorForWho	Chooses door option based on parameters and lets you designate for who
	Parameter 1	ForWho
	Parameter 2	Name or slot number
	Examples	'!c -ZoneDoorForWho all "Obulus Frontier 2"' This will zone all into Obulus Frontier 2. Names must match exactly. This will continue to work: !c -ZoneDoorForWho all 2 This would zone you into the 2nd option.
Zone_Rst	Loads Ogre zone resetter.
Zone_Rst	Parameters	N/A
Zone_Reset_All	Loads Ogre zone resetter. NOTE: There is no confirmation of any sort for this button. When you press it, it resets every zone available.
Zone_Reset_All	Parameter 1	Who should use. Example All

MCP Customization and You

The out of the box settings work for a majority of users. Most people, if they need to make changes will only add and remove buttons. Before making any file changes make sure you backup and understand the changes you are making.

Files

MCP Files

bak.MCPCommandsCustom.xml
- Backup source of MCP Custom command file. Used for patch purposes
LoadOgreMCP.iss
- MCP Script. Do not screw with it if you know whats good for you.
MCPCommands.xml
- The complete default command list and parameters of MCP.
- DO NOT make changes to this file. Use the MCPCommandsCustom.xml file to add any changes you may wish.
MCPCommandsCustom.xml
- MCP Custom command file. Use this file to add any functionality to your MCP buttons.
- Consult the MCPCommands.xml file for file structure.
MCPCustomSettings.xml
- edit to make manual button and layout changes
MCPDefaultSettings.xml
- source file for MCP button layout. Make all changes to MCCPustomSettings.xml not this file

Functions

Examples

Adding an uplink radio button toggle

Let's say we want to change our brigand named Robin from sitting behind the mob to move to the front for one of his special abilities using a nice simple button rather than getting all clicky.

1st right click the MCP button.

Select Uplinkoption_change in the drop down list to the right of select command.

In the text box type a name for your button.

In the additional parameter section first add the player this button apply to, Robin in this case, but you can also specify all, melee, mage or any of the other general categories

Next add the parameter that will be changing.

If you dont know what the option is you need to change you have a couple methods of finding out open UplinkcontrollerXML.xml in your text editor.

Use the search function or scroll though the file to find the text of the option, in this case Move in Front of mob.

<checkbox name='checkbox_settings_moveinfront' template='chkbox'>
  <X>165</X>
  <Y>110</Y>
  <Text>Move In Front of mob</Text>{highlight}
  <OnLeftClick>
    This:RightClick
    This.Parent.FindChild[ChkBoxMoveBehindID]:UnsetChecked
    This.Parent.FindChild[ChkBoxMoveBehindID]:RightClick
 </OnLeftClick>
  <OnRightClick>
    relay all "Script[\${OgreBotScriptName}]:QueueCommand[call UplinkControllerFunction ${This.Type} checkbox_settings_moveinfront ${This.Checked}]"
  </OnRightClick>
</checkbox>

Notice you should have come up on the 4th line of this snippet of code.

On the first line of code you see name='checkbox_settings_moveinfront', this gives us the correct name of the option we want to change, checkbox_settings_moveinfront.

Alternately you can look in the OgreUIXML.xml

Use the search function(recomended) or scroll though the file to find the text of the option, in this case Move in Front of mob.

<checkbox name='checkbox_settings_moveinfront' template='EQ2OB_Checkbox_Settings'>
    <Text>Move in front of mob</Text>
    <OnLeftClick>
       TabConfig.Settings:ChangeSettingDetailsFromUI[${This.Name}]
       if ${This.Checked} && ${UIElement[${OBUI_checkbox_settings_movebehind}].Checked}
       UIElement[${OBUI_checkbox_settings_movebehind}]:LeftClick
    </OnLeftClick>
</checkbox>

Lastly set the value to TRUE(case matters) and of course to commit the changes hit apply

Adding more buttons

On the MCP click the setup button up on the top above the mcp buttons this will bring up the Edit MCP settings UI.

The key numbers to know here are the button height and width and the spacing height and width.

Lets say that we want to add another column to the page frames. We simply add the button width and the button width spacing together (54) and add that to the Width value at a minimum. I would suggest for aesthetic reason adding in between one and a half the button spacing value and twice the value.

adjusting static frame buttons

On the MCP click the setup button up on the top above the mcp buttons this will bring up the Edit MCP settings UI. To add more static frame buttons or less simply adjust the width of Static Frame Width by the value of the button width. Remember to increase the witch of the MCP to compensate for the increase in the static frame width.

Keep in mind that column 1 of the static frame is hard coded to switch pages of the frames.

|rowspan="5"|Inviter||colspan="2"|Staggers invites to group/raid members, and allows them a short opportunity to accept before continuing on.

|- |Parameter1 || -inviter <toonname> **This is the toon who will be DOING the inviting. If not specified, uses the person who pressed the button.** |- |Parameter2 || -r <toonname> **This does a RAID invite to the toonname. |- |Parameter3 || <toonname> **A toon to group invite. |- |Example || I hit the MCP button on a toon called 'Kannkor', and it has the following parameters.

   primalz
   eq2bob
   -r
   saha
   -inviter
   saha
   blowupdoll

The following happens, in this order:

   Kannkor group invites primalz
   Kannkor group invites eq2bob
   Kannkor raid invites saha
   Saha group invites blowupdoll
   The "-inviter saha" told the script to change the inviting over to saha,
   instead of Kannkor. Which is why it started inviting on saha.

|-

Difference between revisions of "OgreMCP"

Latest revision as of 06:01, 31 October 2019

Contents

OgreMCP

About Commands

Default Configuration

Title Bar Buttons

Main Buttons (Left side)

Combat Tab

Zones Tab

Objects

Other Tab

List of commands

A - C

D - J

L - P

R - Z

MCP Customization and You

Files

Functions

Examples

Adding an uplink radio button toggle

Adding more buttons

adjusting static frame buttons

Navigation menu

Personal tools

Namespaces

Variants

Views

Actions

Search

Navigation

Ogre Bot

Ogre Craft

Tools

@@ Line 48: / Line 48: @@
 === Title Bar Buttons ===
-[[file:Ogremcp_title_bar.jpg]]
+[[File:OgreMCP_Title_Bar.PNG]]
 * Setup button -
+* ForWho Button - *When MCP loads, there is now a new window. Labeled 'For Who'.
+**This will modify MCP buttons in real time. There's two sections.
+***ForWhere (OgreConsole and IRC)
+****If NONE of these are selected, then it uses whatever kind of button it was. For example: If you have a "Cast" button, that would use OgreConsole. If you have a "OgreIRC" button, that will use IRC.
+****If you select OgreConsole, then ALL buttons will be sent to OgreConsole, including those that are set as 'OgreIRC'.
+****Likewise, if you select IRC, all OgreConsole buttons will be sent to IRC. Note: IRC must be set up prior or these commands will be sent to the avoid. IRC is generally used for bot raiding.
+***ForWho
+****Any button where a ForWho is possible, and it is not specified, will be converted based on your selection. For example:
+*****MCP -> Jump. If you do not specify the ForWho (leave it blank), the default is all. However, is you select something in the list, such as [x] Mages only, it will then only apply to mages. You could then select Priests only, and press it again, and only priests would jump.
+****There is a [x] Multi-select option, that lets you select more than one option. You need to be smart about this, as you can make impossible scenarios. Such as: [x] Mage only and [x] Priest only. This is an AND, not an OR. If you selected both, it means someone would need to be a MAGE and a PRIEST, which is impossible, so no one would listen to your button. Multi-select isn't used often, but cases where it is used, are usually for a specific group and a specific class. Such as: [x] G3 Only and [x] Mages only. This means Group 3 and Mages only will listen to the command.
+[[File:ForWho.PNG]]
+*[x] IRC Me Only
+**This will be phased out, as using [x] OgreConsole will do the same thing
+*When you hide (alt+~) MCP, it will hide the ForWho window also. When you unhide MCP (alt+~), if the ForWho window was visible before it was hidden, it will be visible again. If it was hidden before, it will remain hidden.
+*This window is HIDDEN by default. You can click the [ForWho] button (beside the [Setup] button) on the MCP to show it. If you wish for it to always be shown on load, inside of [Setup] is a checkbox that will have it show on load.
+*If you wish to specifically invoke this new behaviour, you can do so via command line. Using the keyword "auto" in place of any forwho, and adding a -cfw <ForWhoHere> BEFORE any commands. Example: !c -cfw g1, would result in all commands on that same line, having a default of 'g1' if it's not supplied.
+*In order to complete this change, I had to manually change every single OgreConsole/MCP command that exists. That means every single button. It's possible I made a mistake/typo. If ANY button that was working prior, is not working now, please right click it (to edit it), then take a picture and send it to me. Then I can reproduce the button and fix it. Please include a picture of your ForWho UI also, so I know what you have checked.
 * Enable Swapping - Will allow swapping of buttons to different locations on the MCP. Check Enable, Select the MCP button you wish to move, then Select the destination MCP Button.  '''DONT FORGET TO TURN OFF'''
 * IRC Me Only - Will change all IRC related buttons from !c All to !c Me.  Allowing you to control only your local CPUs using IRC Commands without Un-auth'ing someone.
@@ Line 258: / Line 275: @@
 !colspan="2"|Parameter & Description
 |-
+|rowspan="3"|<center>'''AcceptReward'''</center>
+|colspan="2"|Allows options for choosing rewards where there are actually options.
+|-
+|Parameter 1
+|[[ForWho|ForWho]]
+|-
+|Parameter 2
+|If the reward window has choices, which choice would you like?
+*Leaving Parameter 2 blank or 0, will NOT touch a choice window.
+|-
 |rowspan="4"|<center>'''Alias_AddEntry'''</center>
 |colspan="2"|Adds an entry into the Alias tab.
 |-
 |Parameter 1
-|ForWho.
+|[[ForWho|ForWho]]
 |-
 |Parameter 2
@@ Line 274: / Line 303: @@
 |-
 |Parameter 1
-|ForWho.
+|[[ForWho|ForWho]]
 |-
 |Parameter 2
@@ Line 282: / Line 311: @@
 |New alias name: Example: Primalz
 |-
+|rowspan="2"|<center>'''Alias_ChangeEntryFor_InputWindow'''</center>||colspan="2"| Will give an input window to to change an alias entry
+|-
+|Parameter 1 || NA
+|-
 |rowspan="4"|<center>'''Alias_ChangeEntryAlias'''</center>
 |colspan="2"|Changes an entry into the Alias tab.
 |-
 |Parameter 1
-|ForWho.
+|[[ForWho|ForWho]]
 |-
 |Parameter 2
@@ Line 295: / Line 330: @@
 |-
-|rowspan="1"|<center>'''AltarOfTheAncients'''</center>||colspan="2"|
+|rowspan="2"|<center>'''Alias_ChangeEntryAlias_InputWindow'''</center>||colspan="2"| Will give an input window to to change an alias entry
+|-
+|Parameter 1 || NA
+|-
+|rowspan="2"|<center>'''AltarOfTheAncients'''</center>||colspan="2"|
 Clicks the Alter of the Ancients - ToT preorder clicky, has built in delay to allow you to get through the stun when stacking with other commands.
+|-
+|Parameter 1 || [[ForWho|ForWho]]
 |-
@@ Line 307: / Line 349: @@
 |Parameter 2
 |Who will change their assist..
+|-
+|rowspan="5"|<center>'''ApplyTempAdorn'''</center>||colspan="2"|Applies temporary adornments.
+|-
+|Parameter 1 || [[ForWho|ForWho]]
+|-
+|Parameter 2 || AdornName
+|-
+|Parameter 3 || Slot : "Primary", "chest", or "Both".
+|-
+|Notes ||
+*If you select your slot as "both" it will auto-determine the chest adorn, since there is only 1 at this time. If you want to select the chest adorn, then use the slot of "chest" and it will use the adornname passed.
+*If AdornName is "auto": Fighters/Scouts use CB adorns
+*If AdornName is "auto": Mages/Priest use Pot adorns
 |-
@@ Line 316: / Line 372: @@
-|rowspan="1"|<center>'''ArcannaseEffigyOfRebirth'''</center>||colspan="2"|
+|rowspan="2"|<center>'''ArcannaseEffigyOfRebirth'''</center>||colspan="2"|
 Clicks the Arcannase Effigy Of Rebirth - KA preorder clicky, has built in delay to allow you to get through the stun when stacking with other commands.
 |-
+|Parameter 1 || [[ForWho|ForWho]]
+|-
 |rowspan="3"|<center>'''Assist'''</center>||colspan="2"|Sets assists from parameters.
@@ Line 327: / Line 384: @@
 |Parameter 2 || Who will change their assist..
 |-
+|rowspan="2"|<center>'''Assist_InputWindow'''</center>||colspan="2"| 	Pops up an assist UI window.
+|-
+|Parameter 1 || NA
+|-
 |rowspan="2"|<center>'''AssistUI'''</center>||colspan="2"|Sets assists from a pop up UI.
 |-
@@ Line 353: / Line 416: @@
 |Parameters ||N/A
 |-
+|rowspan="4"|<center>'''AutoTarget_SetRescanTime'''</center>||colspan="2"|Changes the AutoTarget rescan time.
+|-
+|Parameter 1|| [[ForWho|ForWho]]
+|-
+|Parameter 2|| New Value
+|-
+|Examples||
+*'!c -AutoTarget_SetRescanTime all 250'
+**This would set scan time to 250 miliseconds.
+|-
+|rowspan="4"|<center>'''AutoTarget_SetScanRadius'''</center>||colspan="2"|Changes the AutoTarget scan radius.
+|-
+|Parameter 1|| [[ForWho|ForWho]]
+|-
+|Parameter 2|| New Value
+|-
+|Examples||
+*'!c -AutoTarget_SetScanRadius fighter 50'
+**This would set any 'fighters' to 50 scan radius.
+|-
 |rowspan="2"|<center>'''Call_GH'''</center>||colspan="2"|Calls to guild hall if not already in one.
 |-
@@ Line 373: / Line 460: @@
 |rowspan="3"|<center>'''Cancel_Cast..'''</center>||colspan="2"|Cancels current ability being cast then casts defined spell/ability<br />Note: Abilities must be base names. Kick will work. Kick III will not.
 |-
-|Parameter 1 || Who should cast. Example All
+|Parameter 1 || [[ForWho|ForWho]]
 |-
 |Parameter 2 || Spell to be cast.
@@ Line 380: / Line 467: @@
 |rowspan="4"|<center>'''Cancel_CastOn..'''</center>||colspan="2"|Cancels current ability being cast then casts defined spell/ability on specified character<br />Note: Abilities must be base names. Kick will work. Kick III will not.
 |-
-|Parameter 1 || Who should cast. Example All
+|Parameter 1 || [[ForWho|ForWho]]
 |-
 |Parameter 2 || Spell to be cast.
@@ Line 420: / Line 507: @@
 |Parameter 3 || Cast spell on this player.
 |-
+|rowspan="2"|<center>'''CastAbilityOnNPC'''</center>||colspan="2"|<ForWho> <OgreCommand> <Paramaters>
+|-
+|Note: || *This one works a little differently. It will take ALL the parameters and pass them. So you can NOT stack this command.
+*AbilityName MUST be a base name, like everything else. For example: Stone Hammer, or Evade (but not Evade VI, it will cast the highest version you have automatically).
+*MobNameOrID - I highly recommend using ID when you can. This will handle mobs with the same name, and mobs with scary characters in their name, such as the dreaded coma. ${Target.ID} works really well for having someone cast it on your target. Likewise, you can do ${Actor[warden of nightmares].ID}.
+*If they are unable to acquire the proper target, they will NOT cast the ability.
+|-
 |rowspan="4"|<center>'''CastOn..x2'''</center>||colspan="2"|Tells [Bots] to cast a specific [ability] on specific toons.<br />Note: Abilities must be base names. Kick will work. Kick III will not.
 |-
@@ Line 428: / Line 524: @@
 |Parameter 3 and 6 || Cast spell on this player.
 |-
 |rowspan="4"|<center>'''CastOn..x3'''</center>||colspan="2"|Tells [Bots] to cast a specific [ability] on specific toons.<br />Note: Abilities must be base names. Kick will work. Kick III will not.
 |-
-|Parameter 1, 4 & 7 || Who should cast. Example All
+|Parameter 1, 4 & 7 || [[ForWho|ForWho]]
 |-
 |Parameter 2, 5 & 8 || Spell to be cast.
@@ Line 479: / Line 576: @@
 |-
 |Parameter 3, 6, 9, 12 and 15 || TRUE or FALSE (case sensitive).
+|-
+|rowspan="6"|<center>'''ChangeCastStackListBoxItemByTag'''</center>||colspan="2"|Changes cast stack by custom tags
+|-
+|Parameter 1|| [[ForWho|ForWho]]
+|-
+|Parameter 2|| Tag name
+|-
+|Parameter 3|| Status: TRUE, FALSE, or TOGGLE. TRUE ensures the entry is ON. FALSE makes sure the entry is OFF. TOGGLE... well toggles it.
+|-
+|Parameter 4|| Partial string match. TRUE or FALSE (case sensitive). This is FALSE by default, which means exact match only.
+*If FALSE, exact match only. "manadrain" has to equal "manadrain". "Dispell*manadrain" would NOT be modified if "manadrain" was passed.
+*If TRUE, partial matches are fine. "Dispell*manadrain" would be modified if "manadrain" was passed.
+|-
+|Parameter 5|| Silent mode. TRUE or FALSE (case sensitive). FALSE by default. If set to TRUE, it will not output any text to OgreConsole when an entry is modified.
 |-
 |rowspan="10"|<center>'''ChangeLootOptions'''</center>||colspan="2"|Changes the loot options. Thanks to uiywtf for the original code.
 |-
-|Parameter 1 || ForWho - the person to change the loot options on.
+|Parameter 1 || [[ForWho|ForWho]] - the person to change the loot options on.
 |-
 |Parameter 2 || Arguements that can be applied: only one from each group may be applied
@@ Line 517: / Line 629: @@
 *AD - Auto Decline
 |-
-|Example ||-ChangeLootOptions all LO
+|Example ||'ChangeLootOptions all LO'
 *Changes loot options to Leader only. Doesn't modify any other option.
 -ChangeLootOptions all FFA
@@ Line 551: / Line 663: @@
 |-
 |Parameter 3, 6, 9, 12 and 15 || TRUE or FALSE (case sensitive).
+|-
+|rowspan="4"|<center>'''ChangeOgreBotUIOption'''</center>||colspan="2"|...
+|-
+|Parameter 1 || [[ForWho|ForWho]], such as: all
+|-
+|Parameter 2 || Name of object: checkbox_ascension_glacialfreeze_noraidcomboing
+|-
+|Parameter 3 || Value to change it too: TRUE, FALSE, or Toggle.
 |-
 |rowspan="5"|<center>'''Change_Campspot_Who (x2, x3, x4)'''</center>||colspan="2"| Changes campspot for specific toons.<br />For x2/x3/x4 just repeats itself
 |-
-|Parameter 1|| ForWho<br />Example: All, melee, scouts, mages, fighters, dirge, etc.
+|Parameter 1|| [[ForWho|ForWho]]
 |-
 |Parameter 2|| X coord
@@ Line 605: / Line 726: @@
 |Parameters ||N/A
 |-
+|rowspan="4"|<center>'''CheckResearch'''</center>||colspan="2"| Checks your research.
+|-
+|Parameter 1 || [[ForWho|ForWho]]
+|-
+|Parameter 2 ||
+Report all. Default: FALSE
+*By default this will only report people who have completed their research. If you want to see all data pass TRUE.
+|-
+|Example ||
+*'!c -CheckResearch all TRUE'
+**Research: Kannkor --> Complete.
+**Research: Primalz --> 5 days and 21 hours remaining.
+|-
 |rowspan="2"|<center>'''ClsWdw'''</center>||colspan="2"|Close Window. Closes the top most window in the game.
 |-
@@ Line 625: / Line 761: @@
 |Parameters ||N/A
 |-
+|rowspan="5"|<center>'''CoV'''</center>||colspan="2"|Uses the loyalty reward "Call of the Veteran" teleport item.
+|-
+|Parameter 1 || [[ForWho|ForWho]]
+|-
+|Parameter 2 || Travel Option
+*Valid options are: Teleport or Summon. (Same as they are labeled on the window)
+|-
+|Parameter 3 || Toon Name to interact with.
+*If you choose Teleport, to who?
+*If you choose Summon, who?
+|-
+|Parameter 4 ||
+Allow Same Zone. Default FALSE.
+*Most of the time you won't want people within the same zone, using CoV, so this is off by default. Pass it "TRUE" to allow it to use CoV within the same zone.
+|-
+|rowspan="1"|<center>'''CoV_InputWindow'''</center>||colspan="2"|Uses the loyalty reward "Call of the Veteran" teleport item.
+*Same as above, but opens input box (a pop up box) that you have to type the options into.
+|-
 |rowspan="2"|<center>'''Crouch'''</center>||colspan="2"|Simply presses "z" which is the default. If you've changed this... it'll still press z..
 |-
-|Parameters ||N/A
+|Parameter 1 ||N/A
 |-
 |rowspan="2"|<center>'''CS-Dft'''</center>||colspan="2"|Sets campspot. using default camp spot options
@@ Line 645: / Line 805: @@
 *Missing Epic 1.0 quest.
 *Completed checking Kunark Ascending Requirements!
+|-
+|rowspan="3"|<center>'''CurePotions_Replenish'''</center>||colspan="2"| Replenishes your cure potions.
+|-
+|Parameter 1|| [[ForWho|ForWho]]
+|-
+|Parameter 2|| CurePotionName
+Built In Options:
+*All - Will get all four types. Arcane, Trauma, Noxious, Elemental. Which potions will depend on which ones are the latest. As of right now, it's 'Abyssal ____ Remedy'. I will keep this updated as time goes on.
+*Arcane - This will get the latest Arcane, right now it's 'Abyssal Arcane Remedy'.
+*Noxious - This will get the latest Noxious, right now it's 'Abyssal Noxious Remedy'.
+*Elemental - This will get the latest Elemental, right now it's 'Abyssal Elemental Remedy'.
+*Trauma - This will get the latest Trauma, right now it's 'Abyssal Trauma Remedy'.
 |-
 |rowspan="3"|<center>'''CS-JO-JI'''</center>||colspan="2"|[C]amp[S]pot default (everyone). [J]oust [O]ff default (Mages and priests). [J]oust [I]n (melee)</Setting>
 |-
-|Parameter 1 || Campspot for who</Setting>
+|Parameter 1 || Campspot [[ForWho|ForWho]]</Setting>
 |-
 |Parameter 2 || Who should joust off</Setting>
@@ Line 655: / Line 828: @@
 |rowspan="7"|<center>'''CS_Set_Formation_Circle'''</center>||colspan="2"|Sets everyone up in a big circle.
 |-
-|Parameter 1 || ForWho. Example: all
+|Parameter 1 || [[ForWho|ForWho]]. Example: all
 |-
 |Parameter 2 || Distance from the Center. Example: 10
@@ Line 669: / Line 842: @@
 |rowspan="8"|<center>'''CS_Set_Formation_MonkeyInMiddle'''</center>||colspan="2"|Sets everyone up in a big circle, with 1 person in the middle.
 |-
-|Parameter 1 || ForWho. Example: all
+|Parameter 1 || [[ForWho|ForWho]]. Example: all
 |-
 |Parameter 2 || Distance from the Center. Example: 10
@@ Line 691: / Line 864: @@
 !colspan="2"|Parameter & Description
 |-
+|rowspan="4"|<center>'''Deity_Spend'''</center>||colspan="2"| 	Used to spend diety points, thanks to DBG no longer needed.
+|-
+|Parameter 1 || [[ForWho|ForWho]]
+|-
+|Parameter 2 || Value : Auto, CB, Pot, Stam.
+*Auto:
+**For Tanks will spend a point in the order of: Stam -> CB -> Pot.
+**For non-Tanks will spend a point in the order of: CB -> Pot -> Stam.
+|-
+|Parameter 3 || How many points do you want to spend? If omitted, will default to 1 (no change in behaviour). For most people, you will just want to put 10 and be done with it. This means when you press the button, it will spend all of your deity points.
+|-
+|rowspan="3"|<center>'''DeleteQuest'''</center>||colspan="2"| Will delete a quest.
+|-
+|Parameter 1 || [[ForWho|ForWho]]. If all, will be groupleader.
+|-
+|Parameter 2 || Quest name.
+|-
+|rowspan="3"|<center>'''DeleteQuest_InputWindow'''</center>||colspan="2"| Will delete a quest, uses input window
+|-
+|Parameter 1 || [[ForWho|ForWho]]. If all, will be groupleader.
+|-
+|Parameter 2 || Quest name.
+|-
 |rowspan="2"|<center>'''Dev_Bot'''</center>||colspan="2"|Loads Development version of Ogre Bot.
 |-
@@ Line 731: / Line 931: @@
 |-
 |Parameter 1 || option to choose.
 |-
+|rowspan="3"|<center>'''DoorForWho'''</center>||colspan="2"| 	When zoning and you have the option to select which zone this will select the one you use as a parameter.
+|-
+|Parameter 1 || [[ForWho|ForWho]]
+|-
+|Parameter 2 || Door #
+|-
 |rowspan="2"|<center>'''DoorX'''</center>||colspan="2"|When zoning and you have the option to select which zone this will bring up door ui and allow you to select the one you use as a parameter.<br /> '''Note: curently not working'''
 |-
@@ Line 752: / Line 958: @@
 |Parameter 1 || script to end
 |-
+|rowspan="3"|<center>'''EndScriptRequiresOgreBot'''</center>||colspan="2"| 	Ends a script. Takes infinite parameters, but requires 2 parameters. Also requires OgreBot to be running.
+|-
+|Parameter 1 || [[ForWho|ForWho]]
+|-
+|Parameter 2 || Scriptname
+|-
 |rowspan="2"|<center>'''Evac'''</center>||colspan="2"|Anyone with an evacuate ability will use it.
 |-
@@ Line 758: / Line 972: @@
 |rowspan="4"|<center>'''ExecuteAtom'''</center>||colspan="2"|Relays an OgreBotAtom...
 |-
-|Parameter 1 || ForWho
+|Parameter 1 || [[ForWho|ForWho]]
 |-
 |Parameter 2 || AtomName
@@ Line 775: / Line 989: @@
 |-
 |Parameters||N/A
+|-
+|rowspan="2"|<center>'''Force_MountOn'''</center>||colspan="2"|This will recast your mount, regardless if you have it on or not, and you will end up on your mount! (Just don't move for a few seconds while it does it's thing and interrupt it). Thanks Saha for the initial code.
+|-
+|Parameters||[[ForWho|ForWho]]
 |-
 |rowspan="2"|<center>'''Get_Flag'''</center>||colspan="2"|Gets a flag from a guild strategist.
@@ Line 780: / Line 998: @@
 |Parameters||N/A
 |-
+|rowspan="3"|<center>'''GuidedAscension'''</center>||colspan="2"|Uses Guided Ascension Scrolls
+|-
+|Parameter 1||[[ForWho|ForWho]] Default is All
+|-
+|Parameter 2||Must have less than this much vitality to consume scroll. Default: 3000000 (3 million)
+|-
 |rowspan="2"|<center>'''Hail'''</center>||colspan="2"|Everyone will assist you and hail your target.
 |-
 |Parameters||N/A
 |-
+|rowspan="3"|<center>'''Hail_NPC'''</center>||colspan="2"|Hails NPC, allowable over IRC now
+|-
+|Parameter 1||[[ForWho|ForWho]]
+|-
+|Parameter 2||Target name or ID. ${Target.ID}
+|-
+|rowspan="2"|<center>'''Heartstone_RekindleBond'''</center>||colspan="2"| Rekindles Heartstone. Note: You must be quite close to it.
+|-
+|Parameter 1|| [[ForWho|ForWho]]
+|-
 |rowspan="2"|<center>'''HoldUp'''</center>||colspan="2"|This button turns auto follow off.
 |-
 |Parameter 1 || Command for who? Default All
+|-
+|rowspan="2"|<center>'''HQEar'''</center>||colspan="2"|Will use the HQEar on-demand, regardless if the bot just casted it.
+|-
+|Parameters||[[ForWho|ForWho]]
 |-
@@ Line 883: / Line 1,127: @@
 |Parameters||N/A
 |-
+|rowspan="2"|<center>'''LoadAutoTargetList_InputWindow'''</center>||colspan="2"| These options pop up input windows for you to enter in the AutoTarget list you want to load.
+|-
+|Parameter 1|| NA
+|-
 |rowspan="3"|<center>'''LoadAutoTargetListForWho'''</center>||colspan="2"| Loads an AutoTarget List for a specific toon
 |-
@@ Line 901: / Line 1,151: @@
 |Parameters||N/A
 |-
+|rowspan="3"|<center>'''MakeLeader'''</center>||colspan="2"| Changes the group leader.
+|-
+|Parameter 1|| [[ForWho|ForWho]]
+|-
+|Parameter 2|| Make who the leader. Defaults to the person pressing the button if left blank.
+|-
 |rowspan="2"|<center>''' Mentor'''</center>||colspan="2"| Accepts 1 parameter, toonname to mentor.
 |-
@@ Line 909: / Line 1,167: @@
 |Parameters||N/A
 |-
+|rowspan="2"|<center>'''Mount On'''</center>||colspan="2"| This will recast your mount, regardless if you have it on or not, and you will end up on your mount! (Just don't move for a few seconds while it does it's thing and interrupt it). Thanks Saha for the initial code.
+|-
+|Parameter 1 || [[ForWho|ForWho]]
+|-
 |rowspan="5"|<center>'''Move2Area'''</center>||colspan="2"|Tells [Bots] to move to a specific [player].
 |-
@@ Line 915: / Line 1,179: @@
 |Parameter 2 || YCord.
 |-
-|Parameter 3 || Who should move. Example All
+|Parameter 3 ||  [[ForWho|ForWho]] Default is All
 |-
 |Parameter 4 || Precision. Default is 3.
@@ Line 935: / Line 1,199: @@
 |Parameters||N/A
 |-
 |rowspan="6"|<center>'''OFol-Dft'''</center>||colspan="2"|Ogre Follow using default settings (no input box).
 |-
-|Parameter1 || Who Should Follow
+|Parameter1 || [[ForWho|ForWho]]  Should Follow
 |-
-|Parameter2 || Who to follow
+|Parameter2 || [[ForWho|ForWho]]  to follow
 |-
 |Parameter3 || Min Distance. Default 8
@@ Line 947: / Line 1,212: @@
 |Parameter5 || Break on follow. Default FALSE
 |-
 |rowspan="2"|<center>'''OFollow'''</center>||colspan="2"|Brings up the input box options for OgreFollow.
 |-
 |Parameters||N/A
 |-
 |rowspan="3"|<center>'''Ogre_Command'''</center>||colspan="2"|Local ogre command...
 |-
@@ Line 963: / Line 1,230: @@
 |Parameter 2 to 11 || Parameters
 |-
+|rowspan="2"|<center>'''Ogre_CommandRequiresOgreBot_AllParams'''</center>||colspan="2"|<ForWho> <OgreCommand> <Paramaters>
+|-
+|Note: || This one works a little differently. It will take ALL the parameters and pass them. So you can NOT stack this command.
+|-
 |rowspan="3"|<center>'''OgreBotAtom'''</center>||colspan="2"|Executes an atom if Ogrebot is loaded.<br />'''Note:''' Does '''NOT''' relay the command.
 |-
@@ Line 987: / Line 1,261: @@
 |-
 |Parameter 2 || TRUE or FALSE. If TRUE OgreConsole is opened. If FALSE OgreConsole is hidden.
+|-
+|rowspan="3"|<center>'''OgreCraft_AddLastScribedRecipe'''</center>||colspan="2"| 	During a session, OgreCraft will try to keep track of the last recipe you have scribed.
+*During a 'session' means if you close ogre craft down, it will no longer remember the last scribed ability.
+Intended usage: Get a quest that gives you 1 recipe book. Then you click 'OgreCraft_ScribeRecipe', then you click 'AddLastScribedRecipe'. Makes questing easy!
+|-
+|Parameter 1 || [[ForWho|ForWho]] Default: all
+|-
+|Parameter 2 || Quantity. Default 1.
+|-
+|rowspan="2"|<center>'''OgreCraft_AddRecipe_InputWindow'''</center>||colspan="2"| 	Will pop open options to add recipes.
+|-
+|Parameter 1 || [[ForWho|ForWho]] Only all and 'toonname' are only options at this time!
+|-
+|rowspan="2"|<center>'''OgreCraft_CraftQueue'''</center>||colspan="2"| 	Will craft all recipes currently in the que.
+|-
+|Parameter 1 || [[ForWho|ForWho]]
+|-
+|rowspan="4"|<center>'''OgreCraft_ScribeRecipe'''</center>||colspan="2"| 	During a session, OgreCraft will try to keep track of the last recipe you have scribed.
+*During a 'session' means if you close ogre craft down, it will no longer remember the last scribed ability.
+Intended usage: Get a quest that gives you 1 recipe book. Then you click 'OgreCraft_ScribeRecipe', then you click 'AddLastScribedRecipe'. Makes questing easy!
+|-
+|Parameter 1 || [[ForWho|ForWho]] Default: all
+|-
+|Parameter 2 || Quantity. Default all.
+|-
+|Example ||
+*'OgreCraft:ScribeRecipe'
+**Would scribe all recipes
+*'OgreCraft:ScribeRecipe all "Random Recipe Name"'
+**Would scribe the "Random Recipe Name" book
 |-
@@ Line 997: / Line 1,305: @@
 |Parameter 1 || chat option to choose.
 |-
 |rowspan="2"|<center>'''Pause'''</center>||colspan="2"|Pauses all the bots.
 |-
@@ Line 1,028: / Line 1,337: @@
 |Parameters||N/A
 |-
-|rowspan="2"|<center>'''Profile'''</center>||colspan="2"|Loads a profile from a pop up UI.
+|rowspan="2"|<center>'''Profile_InputWindow'''</center>||colspan="2"|Loads a profile from a pop up UI. (Formerly 'Profile')
 |-
 |Parameters||N/A
 |-
+|rowspan="2"|<center>'''ProvingGrounds_Exit'''</center>||colspan="2"|Exits Proving Grounds
+If in a match will exit the match.
+If in the lobby will exit the lobby.
+|-
+|Parameters||[[ForWho|ForWho]]
+|-
+|rowspan="2"|<center>'''ProvingGrounds_Scoreboard_Close'''</center>||colspan="2"|When you complete a proving grounds and get the scoreboard up, this will close it.
+|-
+|Parameters||[[ForWho|ForWho]]
+|-
 |}
@@ Line 1,052: / Line 1,374: @@
 |Parameters||ForWho
 |-
+|rowspan="2"|<center>'''RedeemKrono'''</center>||colspan="2"|Redeems/uses a krono... Note that -consumekrono still works but is phased out to the new phrasing
+|-
+|Parameters ||[[ForWho|ForWho]]
+|-
 |rowspan="4"|<center>'''RelayRunScript'''</center>||colspan="2"|relay all - Runs a script.<br />'''Note:''' It will pass 10 parameters. NULL for any not filled in. This must be handled by the script.
 |-
@@ Line 1,103: / Line 1,432: @@
 |Parameter 2-11 || Parameters for script
 |-
-|rowspan="3"|<center>'''SetUpFor___'''</center>||colspan="2"|Sends a "set up for ___" command.  In the example below, "set up for dagrin" would be sent to all
+|rowspan="4"|<center>'''RunScriptRequiresOgreBot'''</center>||colspan="2"| 	Runs a script. Takes infinite parameters, but requires 2 parameters. Also requires OgreBot to be running.
 |-
-|Parameter 1 || CommandForWho, example: all
+|Parameter 1 || [[ForWho|ForWho]]
+|-
+|Parameter 2 || Scriptname
+|-
+|Parameter 3+ || Additional script dependant parameters
+|-
+|rowspan="2"|<center>'''RunScriptRequiresOgreBot_AllParams'''</center>||colspan="2"|<ForWho> <OgreCommand> <Paramaters>
+|-
+|Note: || This one works a little differently. It will take ALL the parameters and pass them. So you can NOT stack this command.
+|-
+|rowspan="6"|<center>'''ScrollOf'''</center>||colspan="2"|Uses scrolls based off of the parameters you set.
+|-
+|Parameter 1 || [[ForWho|ForWho]]
+|-
+|Parameter 2 || Scroll name. Default is "Prowess"
+*Base names
+**Scroll of Prowess
+**Scroll of Pain
+**Scroll of Pure Power
+*Aliases:
+**Prowess
+**Pain
+**Power
+|-
+|Parameter 3 || If duration in minutes is < this value, cancel the scroll first. Leave blank or 0 to disable.
+|-
+|Examples||
+*'!c -ScrollOf all Prowess"
+**Everyone would use a Scroll of Prowess.
+*'!c -Scrollof priest pain'
+**Priests would use a Scroll of Pain.
+|-
+|Notes||
+*Will auto-determine if you need to scribe the ability first, or if you can just use it.
+*Error reporting to Ogre Console on failure.
+*For best results, use only Thaumic scrolls. For example: Thaumic Scroll of Prowess.
+*At this time, you must use a base name or alias.
+|-
+|rowspan="4"|<center>'''SetUpFor___'''</center>||colspan="2"|Sends a "set up for ___" command.
+|-
+|Parameter 1 || [[ForWho|ForWho]]
 |-
 |Parameter 2 || Name of the mob to set up for, example: dagrin
+|-
+|Example || 'set up for dagrin' would be send to all
+|-
+|rowspan="2"|<center>'''SetUpFor__InputWindow'''</center>||colspan="2"| Will give an input window to put in the name of the set up
+|-
+|Parameter 1 || NA
 |-
@@ Line 1,167: / Line 1,547: @@
 *Resolve
 *Ascension
+*ascension_scrolls
+*faction_<factionname>
+**please note this takes 2-10 seconds on average to process faction results
 *Aeauto (Thanks to uiywtf)
 *Reuse (Thanks to uiywtf)
 *Cast (Thanks to uiywtf)
+*item_itemnamehere (Only checks inventory. Not equipped or bank etc.)
 *Full list available by using '!c -spewstats all help' in the Ogre console
 |-
 |OgreConsole Examples ||
-*!c all -spewstat all aeauto -spewstat all cast -spewstat all reuse
+*-spewstats all "item_guided ascension"
+**Kannkor --> has item: guided ascension -> 26
+*-spewstats all "item_earring of the icelord"
+**Kannkor --> has item: earring of the icelord
+*'!c all -spewstat all aeauto -spewstat all cast -spewstat all reuse'
 **Primalz --> AEAuto: 102.1%
 **Primalz --> Cast: 104.3%
@@ Line 1,182: / Line 1,571: @@
 **Kannkor --> Reuse: 102.3%
-*!c -Spewstats ${Me.Name} Ascension
+*'!c -Spewstats ${Me.Name} Ascension'
-**Kannkor --> Ascension: Level 1 Thaumaturgist. 87.8% into level. Vitality remaining: 213210
+**Kannkor --> Ascension: Level 1 Thaumaturgist. 87.8% into level. Vitality remaining: 213210 Scrolls:3
-*!c -Spewstats ${Me.Name} Ascension_vit
+*'!c -Spewstats ${Me.Name} Ascension_vit'
 **Kannkor --> Ascension Vitality Remaining: 213210
-*!c -Spewstats ${Me.Name} Ascension_exp
+*'!c -Spewstats ${Me.Name} Ascension_exp'
 **Kannkor --> Ascension Exp: 2632790 of 3000000 - 87.8%
-*!c -Spewstats all "currency_Loyalty Point Token"
+*'!c -Spewstats all "currency_Loyalty Point Token"'
 **Kannkor --> Loyalty Point Token --> 1733
 **Primalz --> Loyalty Point Token --> 1505
@@ Line 1,197: / Line 1,586: @@
 **KannkorWarlock --> Loyalty Point Token --> 1521
-*!c -Spewstats Mage Resolve IRC
+*'!c -Spewstats Mage Resolve IRC'
 **in #DecoratorzIRC
 **08:51:46: Kannkor_IRC: !c me -spewstats shaman resolve irc
 **08:51:47: Kannkor_IRC: Kannkor --> Resolve: 272
 **08:51:47: Kannkor_IRC: Primalz --> Resolve: 268
+*'!c -SpewStat all "faction_Claws of Veeshan"'
+**Toon1 --> Claws of Veeshan --> 50000 ( ally )
+**Toon2 --> Claws of Veeshan --> 12825 ( amiably )
+*Example: If a faction is not found.
+**'!c -SpewStat all "faction_primalz faction"'
+***Toon1 --> primalz faction --> Not found.
 |-
@@ Line 1,208: / Line 1,604: @@
 |Parameters||N/A
 |-
+|rowspan="2"|<center>'''Summon_Familiar'''</center>||colspan="2"|Summons your familiar
+|-
+|Parameters||[[ForWho|ForWho]]
+|-
 |rowspan="3"|<center>'''Target___'''</center>||colspan="2"|Relays a target command<br />Partial search string. Special 'me' can be used to specify the player.
 |-
-|parameter 1 ||[[ForWho|ForWho]
+|parameter 1 ||[[ForWho|ForWho]]
 |-
 |Parameter 2 || Target Name
@@ Line 1,236: / Line 1,638: @@
 |-
+|rowspan="6"|<center>'''Timer'''</center>||colspan="2"| 	This is the internal tool Ogrebot uses for displaying raid/grind timers on screen. You can now add them too without any fuss!
+|-
+|Parameter 1 || [[ForWho|ForWho]]
+|-
+|Parameter 2 || Timer in seconds.
+|-
+|Parameter 3 || Slot #. Valid options 1 to 10.
+|-
+|Parameter 4 || Message.
+|-
+|Notes ||
+*You should NOT use these on mobs that have raid/grind options (or turn off raid/grind options first). Or at the very least, use the later numbers first. Ogrebot raid options always works from 1-#, depending on how many it needs. If you want to add your own timers, use 10-#, counting up. Example, you wanted to add 3, you would use 8, 9, and 10.
+*Timers are automatically removed 5 seconds after the timer has expired.
+*Timers can be updated, even if the timer hasn't expired.
+*If anyone is using these and wants more functionality send me a PM and we can discuss. There are more options available but I was trying to keep the API simple.
+*You can use these in scripts also. When you want a timer, "oc !c -timer" (you can add your parameters).
+|-
 |rowspan="2"|<center>'''Trak-HUD'''</center>||colspan="2"|Displays or removes the Trakanon HUD.<br />Display 1 - Distance from Orb<br />Display 2 - Nearest PC and distance
@@ Line 1,242: / Line 1,661: @@
 |-
+|rowspan="5"|<center>'''Travel'''</center>||colspan="2"| 	Travel refers to the "Fast Travel" map. This is when you click on a bell, druid portal, wizard spires, etc.
+*Note: This does NOT open the Fast Travel map. It must already be open.
+|-
+|Parameter 1 || [[ForWho|ForWho]]
+|-
+|Parameter 2 || ToWhere
+|-
+|Parameter 3 || Exact Match : TRUE (must be exact) or FALSE (partial match)
+|-
+|Example ||
+'-Travel all Qeynos'
+*Anyone who has a Fast Travel window open, will go to Qeynos.
+'-Travel all Commonlands TRUE'
+*Anyone who has a Fast Travel window open, will go to Qeynos.
+'-Travel Fighter commonlands'
+*All fighters would go to The Commonlands.
+|-
+|rowspan="5"|<center>'''TravelHelper'''</center>||colspan="2"| 	Opens a UI with various travel options, i.e Fast Travel, Wizard Spire, Bell.  And sends travel commands to team members.
+|-
+|1 ||
+|-
+|2 ||
+|-
+|3 ||
+|-
+|Example ||
+|-
 |rowspan="2"|<center>'''Travel_InputWindow'''</center>||colspan="2"|Pops open the input window system to ask you to type in where you would like to go.
@@ Line 1,265: / Line 1,712: @@
 |-
+|rowspan="4"|<center>'''TravelBell'''</center>||colspan="2"| 	Attempts to click on a bell near you, then does the Travel.
+|-
+|Parameter 1 || [[ForWho|ForWho]]
+|-
+|Parameter 2 || ToWhere
+|-
+|Parameter 3 || Exact Match : TRUE (must be exact) or FALSE (partial match)
+*Default is FALSE
+|-
+|rowspan="4"|<center>'''TravelDruid'''</center>||colspan="2"| 	Attempts to click on a druid bush/guild hall druid dude near you, then does the Travel.
+|-
+|Parameter 1 || [[ForWho|ForWho]]
+|-
+|Parameter 2 || ToWhere
+|-
+|Parameter 3 || Exact Match : TRUE (must be exact) or FALSE (partial match)
+*Default is FALSE
+|-
+|rowspan="4"|<center>'''TravelSpires'''</center>||colspan="2"| 	Attempts to click on a Ulteran Spires (Wizard portal) near you, then does the Travel. This will now work in PoM on the teleporter pads.
+|-
+|Parameter 1 || [[ForWho|ForWho]]
+|-
+|Parameter 2 || ToWhere
+|-
+|Parameter 3 || Exact Match : TRUE (must be exact) or FALSE (partial match)
+*Default is FALSE
+|-
 |rowspan="2"|<center>'''Turt-HUD'''</center>||colspan="2"|Displays or removes the Turtles HUD [for the Tert raid encounter in Kraytoc].<br />Display 1 - Right - Health - Distance<br />Display 2 - Left - Health - Distance
@@ Line 1,283: / Line 1,759: @@
 |rowspan="4"|<center>'''Uplinkoption_change'''</center>||colspan="2"|Changes a checkbox to checked (TRUE) or unchecked (FALSE) or Toggle <br />'''Example:''' This will turn on Ignore NPC HP 100% for everyone<br />param 1 = All<br />Param 2 = checkbox_settings_ignoretargettoattackhealthcheck<br />Param 3 = TRUE
 |-
-|param 1 || [[ForWho|ForWho]
+|param 1 || [[ForWho|ForWho]]
 |-
 |Param 2 || Name of object to change (obtained via xml files - path to your \InnerSpace\Scripts\EQ2OgreBot\UplinkControllerXML.xml)
@@ Line 1,295: / Line 1,771: @@
 |rowspan="4"|<center>'''Uplinkoption_changex2'''</center>||colspan="2"|Changes a UI option
 |-
-|param 1 and 4 || [[ForWho|ForWho]
+|param 1 and 4 || [[ForWho|ForWho]]
 |-
 |Param 2 and 5 || Name of object to change (obtained via xml files - path to your \InnerSpace\Scripts\EQ2OgreBot\UplinkControllerXML.xml)
@@ Line 1,305: / Line 1,781: @@
 |rowspan="4"|<center>'''Uplinkoption_changex6'''</center>||colspan="2"|Changes a UI option
 |-
-|params 1-4-7-10-13-16 || [[ForWho|ForWho]
+|params 1-4-7-10-13-16 || [[ForWho|ForWho]]
 |-
 |Param 2-5-8-11-14-17 || Name of object to change (obtained via xml files)
@@ Line 1,357: / Line 1,833: @@
 |Parameters||N/A
 |-
+|rowspan="3"|<center>'''ZoneDoor'''</center>||colspan="2"| 	Chooses door option for all based on parameter
+|-
+|Parameter 1 || Name or slot number
+|-
+|Example ||
+*'!c -ZoneDoor "Obulus Frontier 2"'
+**This will zone all into Obulus Frontier 2. Names must match exactly.
+|-
+|rowspan="4"|<center>'''ZoneDoorForWho'''</center>||colspan="2"| 	Chooses door option based on parameters and lets you designate for who
+|-
+|Parameter 1 || [[ForWho|ForWho]]
+|-
+|Parameter 2 || Name or slot number
+|-
+|Examples ||
+*'!c -ZoneDoorForWho all "Obulus Frontier 2"'
+**This will zone all into Obulus Frontier 2. Names must match exactly.
+*This will continue to work:
+**!c -ZoneDoorForWho all 2
+***This would zone you into the 2nd option.
+|-
 |rowspan="2"|<center>'''Zone_Rst'''</center>||colspan="2"|Loads Ogre zone resetter.
 |-
@@ Line 1,387: / Line 1,887: @@
 ===Functions===
 ===Examples===
 ====Adding an uplink radio button toggle====