Difference between revisions of "OgreMCP"

From ISXOgre
Jump to: navigation, search
(→‎D - J)
(→‎L - P)
Line 634: Line 634:
  
 
===L - P===
 
===L - P===
−
*LetsGo
+
{| class="wikitable"
−
**This button removes movement restrictions such as HoldUp and campspot.
+
|-
−
***Parameter1 = Command for who? Default = All
+
!Command
−
<br />
+
!colspan="2"|Parameter & Description
−
*List_IPs
+
|-
−
**List any computers connected via the uplink.
+
|rowspan="2"|<center>'''LetsGo'''</center>||colspan="2"|This button removes movement restrictions such as HoldUp and campspot.
−
<br />
+
|-
−
*LoadAutoTargetListForWho
+
|Parameter1 || Command for who? Default All
−
** Loads an AutoTarget List for a specific toon
+
|-
−
** Parameter 1 = List to load.
+
|rowspan="2"|<center>'''List_IPs'''</center>||colspan="2"|List any computers connected via the uplink.
−
** Parameter 2 = Who should load the list.
+
|-
−
<br />
+
|Parameters||N/A
−
*Load_Bot
+
|-
−
**Loads Ogre Bot.
+
|rowspan="3"|<center>'''LoadAutoTargetListForWho'''</center>||colspan="2"| Loads an AutoTarget List for a specific toon
−
<br />
+
|-
−
*Load_Ext
+
|Parameter 1 || List to load.
−
**Loads ISXOgre.
+
|-
−
<br />
+
|Parameter 2 || Who should load the list.
−
*Main
+
|-
−
**Toggles the main window. Same as pressing Show Main or Hide Main.
+
|rowspan="2"|<center>'''Load_Bot'''</center>||colspan="2"|Loads Ogre Bot.
−
<br />
+
|-
−
* Mentor
+
|Parameters||N/A
−
** Accepts 1 parameter, toonname to mentor.
+
|-
−
<br />
+
|rowspan="2"|<center>'''Load_Ext'''</center>||colspan="2"|Loads ISXOgre.
−
*Mount
+
|-
−
**Clicks the mount ability. If you have a mount it will cancel it. If you do not have a mount it will summon it.
+
|Parameters||N/A
−
<br />
+
|-
−
*Move2Area
+
|rowspan="2"|<center>'''Main'''</center>||colspan="2"|Toggles the main window. Same as pressing Show Main or Hide Main.
−
**Tells [Bots] to move to a specific [person].
+
|-
−
***Parameter 1 = XCord
+
|Parameters||N/A
−
***Parameter 2 = YCord.
+
|-
−
***Parameter 3 = Who should move. Example All
+
|rowspan="2"|<center>''' Mentor'''</center>||colspan="2"| Accepts 1 parameter, toonname to mentor.
−
***Parameter 4 = Precision. Default is 3.
+
|-
−
<br />
+
|Parameters||N/A
−
*NoMove
+
|-
−
**Prevents incombat movement such as move into melee range and move behind.
+
|rowspan="2"|<center>'''Mount'''</center>||colspan="2"|Clicks the mount ability. If you have a mount it will cancel it. If you do not have a mount it will summon it.
−
**'''Note''':Use LetsGo to clear the NoMove flag.
+
|-
−
<br />
+
|Parameters||N/A
−
*NoTarget
+
|-
−
**Clears everyones target.
+
|rowspan="5"|<center>'''Move2Area'''</center>||colspan="2"|Tells [Bots] to move to a specific [person].
−
<br />
+
|-
−
*OFol---
+
|Parameter 1 || XCord
−
**Decreases the distance of OgreFollow.
+
|-
−
<br />
+
|Parameter 2 || YCord.
−
*OFol-++
+
|-
−
**Increases the distance of OgreFollow.
+
|Parameter 3 || Who should move. Example All
−
<br />
+
|-
−
*OFol-Dft
+
|Parameter 4 || Precision. Default is 3.
−
**Ogre Follow using default settings (no input box).
+
|-
−
***Parameter1 = Who Should Follow
+
|rowspan="2"|<center>'''NoMove'''</center>||colspan="2"|Prevents incombat movement such as move into melee range and move behind.<br />'''Note''':Use LetsGo to clear the NoMove flag.
−
***Parameter2 = Who to follow
+
|-
−
***Parameter3 = Min Distance. Default 8
+
|Parameters||N/A
−
***Parameter4 = Max Distance. Default 100
+
|-
−
***Parameter5 = Break on follow. Default FALSE
+
|rowspan="2"|<center>'''NoTarget'''</center>||colspan="2"|Clears everyones target.
−
<br />
+
|-
−
*OFollow
+
|Parameters||N/A
−
**Brings up the input box options for OgreFollow.
+
|-
−
<br />
+
|rowspan="2"|<center>'''OFol---'''</center>||colspan="2"|Decreases the distance of OgreFollow.
−
*Ogre_Command
+
|-
−
**Local ogre command...
+
|Parameters||N/A
−
***Parameter 1 = ogre command
+
|-
−
***Parameter 2 to 11 = Parameters
+
|rowspan="2"|<center>'''OFol-++'''</center>||colspan="2"|Increases the distance of OgreFollow.
−
<br />
+
|-
−
*Ogre_CommandRelay
+
|Parameters||N/A
−
**relay all ogre command...
+
|-
−
***Parameter 1 = ogre command
+
|rowspan="6"|<center>'''OFol-Dft'''</center>||colspan="2"|Ogre Follow using default settings (no input box).
−
***Parameter 2 to 11 = Parameters
+
|-
−
<br />
+
|Parameter1 || Who Should Follow
−
*OgreBotAtom
+
|-
−
**Executes an atom if Ogrebot is loaded.
+
|Parameter2 || Who to follow
−
***Parameter 1: atom name. Case sensitive.
+
|-
−
***Parameter 2-11: Parameters
+
|Parameter3 || Min Distance. Default 8
−
**'''Note:''' Does '''NOT''' relay the command.
+
|-
−
<br />
+
|Parameter4 || Max Distance. Default 100
−
*OgreBotAtomRelay
+
|-
−
**Executes an atom if Ogrebot is loaded.
+
|Parameter5 || Break on follow. Default FALSE
−
***Parameter 1: atom name. Case sensitive.
+
|-
−
***Parameter 2-11: Parameters
+
|rowspan="2"|<center>'''OFollow'''</center>||colspan="2"|Brings up the input box options for OgreFollow.
−
**'''Note:''' Does relay the command.
+
|-
−
<br />
+
|Parameters||N/A
−
*OgreIRC
+
|-
−
**Sends a message or command to OgreIRC
+
|rowspan="3"|<center>'''Ogre_Command'''</center>||colspan="2"|Local ogre command...
−
***Parameter 1 to 100 = OgreIRC Commands and paramters
+
|-
−
<br />
+
|Parameter 1 || ogre command
−
*Opt_Num
+
|-
−
**After hailing you can use this to converse with an NPC.
+
|Parameter 2 to 11 || Parameters
−
***Parameter 1 = chat option to choose.
+
|-
−
<br />
+
|rowspan="3"|<center>'''Ogre_CommandRelay'''</center>||colspan="2"|relay all ogre command...
−
*Pause
+
|-
−
**Pauses all the bots.
+
|Parameter 1 || ogre command
−
<br />
+
|-
−
*Pet_Off
+
|Parameter 2 to 11 || Parameters
−
**Everyone does a pet back off command.
+
|-
−
<br />
+
|rowspan="3"|<center>'''OgreBotAtom'''</center>||colspan="2"|Executes an atom if Ogrebot is loaded.<br />'''Note:''' Does '''NOT''' relay the command.
−
*Portal_To_Guild
+
|-
−
**Relays to use Magic Door to Guild Hall
+
|Parameter 1|| atom name. Case sensitive.
−
<br />
+
|-
−
*Profile
+
|Parameter 2-11|| Parameters
−
**Loads a profile from a pop up UI.
+
|-
−
<br />
+
|rowspan="3"|<center>'''OgreBotAtomRelay'''</center>||colspan="2"|Executes an atom if Ogrebot is loaded.<br />'''Note:''' Does relay the command.
 +
|-
 +
|Parameter 1|| atom name. Case sensitive.
 +
|-
 +
|Parameter 2-11|| Parameters
 +
|-
 +
|rowspan="2"|<center>'''OgreIRC'''</center>||colspan="2"|Sends a message or command to OgreIRC
 +
|-
 +
|Parameter 1 to 100 || OgreIRC Commands and paramters
 +
|-
 +
|rowspan="2"|<center>'''Opt_Num'''</center>||colspan="2"|After hailing you can use this to converse with an NPC.
 +
|-
 +
|Parameter 1 || chat option to choose.
 +
|-
 +
|rowspan="2"|<center>'''Pause'''</center>||colspan="2"|Pauses all the bots.
 +
|-
 +
|Parameters||N/A
 +
|-
 +
|rowspan="2"|<center>'''Pet_Off'''</center>||colspan="2"|Everyone does a pet back off command.
 +
|-
 +
|Parameters||N/A
 +
|-
 +
|rowspan="2"|<center>'''Portal_To_Guild'''</center>||colspan="2"|Relays to use Magic Door to Guild Hall
 +
|-
 +
|Parameters||N/A
 +
|-
 +
|rowspan="2"|<center>'''Profile'''</center>||colspan="2"|Loads a profile from a pop up UI.
 +
|-
 +
|Parameters||N/A
 +
|-
 +
|}
  
 
===R - Z===
 
===R - Z===

Revision as of 07:34, 4 April 2013

OgreMCP


Tab Summary

MCP = Master Control Panel. OgreMCP is used to pass commands via the uplink. To load OgreMCP, type "ogre MCP" and a new window appears.

Note: Nearly all of these buttons are sending commands through the uplink, and will affect ALL sessions connected.

With Version 15, OgreMCP was completely redesigned. It is now one of the most advanced UI windows in the Ogre collection. It has taken customization to the next level.

Types of buttons

There are four different types of buttons.

  • Setup button - When you click the setup button a new window appears that allows you to customize some of the options about the MCP itself. Such as the height/width of the window, of the static window, of the buttons, and even the spacing between the buttons. Generally speaking, I'd recommend keeping the defaults.
  • Frame changers - The first 4 buttons on the left most side. By default they are labeled Combat, Zones, Objects, and Other. You can rename these to anything you want. They simply change the "Frames" (or sets of buttons) on the right hand side.
  • Static buttons - These are buttons that never move. This is anything on the left side. By default, this is 18 buttons. Note: Four of these buttons are the frame changers. The other buttons can hold any command.
  • Frame buttons - These buttons are specific to each frame and are visible or hidden depending on which "Frame changer" is selected. By default there are 24 buttons. These buttons can hold any command.

About Commands

What is a command?


The MCP is made up of two types of files. Visual files, and command files. The visual files simply show the buttons and have a (not visible) "command" attached to it. When this button is clicked, is the command is run.


Where do I get commands?


There are two command files. One that is provided and updated by me. The other is one you can add custom commands too. The reason there are two, is so when I update the master command file, it doesn't effect yours.


How do I make/use/change/ buttons?

You simply right click a button and an edit window appears.

[Need picture of right click edit window]

From here, you select the command. If you're not sure what the command does, select it and read the description. If it requires parameters, be sure you enter them in. Under the select command is a custom button name, so you can name the button something that will make sense to you. When you are ready to save it, press the Apply button.


Default Configuration

This is just a brief description of the default setup of the MCP. For a list of commands and customization options see the commands section.

Main Buttons (Left side)

Ogremcp combat static.jpg

  • There are multiple "Tabs". Clicking each of these changes which buttons appear.
    • Combat
    • Zones
    • Objects
    • Other
    • 5
    • 6
    • 7
    • 8
  • There are 24 static buttons (includes the tabs from above). These never disappear, regardless of which "tab" you are on.
    • Lets go - Defaulted on when the bot loads. This is used to remove the following flags: Hold up, No move, Do not move, Camp spot, Fiegn death. You can also use a chat command of "lets go" in a tell/group/raid to activate this command. -Queued command. Happens when the bot finishes what it is doing.
    • Hold up - Turns OFF auto follow. -Forced command. This happens immediately, regardless if the bot is doing other things.
    • "OFollow" - OgreFollow
    • "OFol-Dft" - OgreFollow Defaults
    • "OFol-++" - Increases follow range (Puts more distance between you and the follow person)
    • "OFol ---" - Decreases follow range (Puts less distance between you and the follow person)
    • CS-JO-JI - CampSpot (Default), Joust Off (default), and Joust In. This is used to set all your toons to a campspot of where they are, but allow melee to fight. Gives easy access to joust out if needed.
    • Jst-Out / Jst-In / Jst-Off - See Jousting below.
    • Pause - Presses the "pause" button on the bot.
    • Resume - Resumes the bot (counter to Pausing it).


Jousting

  • "Jousting" just temporary disables campspot(so move into melee range is then allowed). When Jousting is turned back on, it re-actives campspot (thus disabling move into melee range).
  • USAGE:
    • Note: Move to Area must be checked on the settings tab of the character for the campspot to work.
    • Turn Campspot on
    • Use "Jst off" (Joust Off) and input anyone you do not want to be jousting (such as "casters", or "healers"). [Optional step]
    • When you wish to allow your jousters to melee, hit "Joust in"
    • When you wish your jousters to get out, hit "Joust out"
    • NOTE Currently Jousting only supports people who use "move into melee range" as their way of "Jousting in".
  • Any Joust command will do nothing if you do not have Campspot enabled.
  • Joust commands are added to the main queue. Meaning when the bot is finished doing it's current task, it will go through the queued commands. You can override a Joust in command with a Joust out command, assuming the bot isn't doing anything else (such as a bard in the middle of casting a spell while they are running).
  • Other uses: You are fighting a mob that expodes, or you need EVERYONE to run very far away at a certain point in the fight. Go to the "safe spot" and turn campspot on for everyone, then hit "Joust in". This temporary turns off campspot. You can then move your toons any where you want. When the mob is going to explode, hit "Joust out" and they will run to your camp spot.

Combat Tab

Ogremcp combat buttons.jpg

  • CmpSpot - Forces people to stay within a certain distance of a pre-designed spot. (Useful for knockbacks etc) (NOTE: Requires "Move to Area" enabled on Ogrebot)
    • Input box #1 - Camp spot for who? - Who will be listening to this command. Default is all.
    • Input box #2 - Distance - Min distance <space> max distance.
      • Min distance - How close do you stay to this spot. Default is 2 (almost right on top of it).
      • Max distance - Only move to this distance if you are within this close to it (don't need any zone-wide running). Default is 75, which is quite far away.
  • CS-Dft - CampSpot Default. Equal to pressing CampSpot and pressing <Enter> twice.
  • Sanct - Sanctuary - Queues up the spell Sanctuary for templars (if it's ready).
  • DivineR - Casts Divine Recovery if it's available (Cleric AA).
  • BDance - Makes you break dance.. err.. Will cast Blade Dance if it is available (Bard AA).
  • Imm-Res - Immaculate Revival (Cleric end line ability).
    • If any priest or fighter is dead, the ability is cast.
    • If any 2 people are dead, the ability is cast.
      • If you wish to change the # of people dead to cast, you can pass it 1 parameter(in OgreMCPXML). The default is 2 and doesn't need to be specified.
  • Otherwise it will not cast.

(Changed Sanctuary, Blade Dance, Divine Recovery over to the new CastFromUplink function. )

  • Verdict - If you can cast Verdict, you will.
  • Channel - If you can cast Channel, you will.
  • C-Focus - If you can cast Channeled Focus, you will.
  • F-Follow - ...
  • Pet Off - Back's your pet off.
  • Evac - If you can cast evac, you will.
  • Come2Me - Move to the person giving the command. The following can be a prefix for the come to me command. Also works as a chat command as follows.
    • Note: The person giving the command must be authorized (in eq2chars.inc).
    • Note: You need Move To Area selected for these to work, and a target (can be yourself).
    • "come to me" - Everyone.
    • "melee come to me" - Fighters/scouts only.
    • "mages come to me" or "casters come to me" - Mages only.
    • "priests come to me" or "healers come to me" - Priests only.
    • "g# come to me" - Anyone in a raid in that group #.
    • "toonname come to me" - Anyone with that toon name, such as "Kannkor come to me".
  • Coe-Sht - If you can cast Coercive Shout, you will.
  • Res - Counter to "Stop Res" below. Turns Resing on ONLY if it was turned off via Stop Res.
  • Stop Res - Temporarly turns resing off. Use "Res" to re-enable.
  • Revive - Revive - WARNING! If there are multiple options, it does NOT choose the one you have highlighted. I haven't spent the time to determine which one it does.
  • 6
  • Assist - "Dynamic Assist" - Change assists on-the-fly. Note: Auto assist MUST be checked or this option does nothing.
    • Input box #1: Who should be assisting? Who will listen to this command.
    • Input box #2: Who do you want to assist?
    • Example usage: Input box#1: Mages, Input Box #2: Kannkor. This would make all mages assist Kannkor. I could then do: Input Box#1: Melee, Input box #2: Roknnak. All melee would be assisting Roknnak (while all casters are still assisting Kannkor).
    • Note: Who should be assisting can take "g1, g2, g3, g4" as options. For example, lets say you're in g1 and your botted toon is in g4, you could do assist -> g4 -> tank_in_g4_name.
    • Note: Putting a blank option in Input Box #2 clears this option for EVERYONE.
  • WarMyth - Warlock Myth toggle.
  • TShell - If you can cast Tortoise Shell (AOE blocker), you will.
  • NoMove - "Do not move" - temporarily disables move into melee range, move behind, and auto follow. Use "Lets go" to clear.
  • No Target - Clears your target. Useful to stop many various movements.
  • Test - Test used by Kannkor. You can ignore this (just runs a test file that you don't have).

Zones Tab

Ogremcp zones buttons.jpg

(Zones - Has zone specific stuff. Mostly HUDs.

  • Exeter - When fighting Maldonous (sp?) Exeter in Palace of Ferzhul, every 20% all 6 people in the group must click the flames. This does that for you. Click once every time he goes away.
  • ScavMid - ...
  • Trak hud - On-screen HUD that puts the name/distance of the closest PC and closest special to you. I use it when I kill Trak. (Toggle on off)
  • Turt hud - ...
  • 5
  • InfoOn - Toggles information about a Named NPC or npc, and distance from your cleric/shaman/druid in your group.
  • Orb-Yel - Orb clickers for Penda/Kendis
  • Orb-Blck - Orb clickers for Penda/Kendis
  • Orb-Purp - Orb clickers for Penda/Kendis
  • 4
  • 5
  • 6
  • Orb-Blue - Orb clickers for Penda/Kendis
  • Orb-Grn - Orb clickers for Penda/Kendis
  • Orb-Red - Orb clickers for Penda/Kendis
  • 4
  • 5
  • 6
  • Ld Doljon - Lord Bob, Loads it on all sessions.
  • End Doljon - Lord Bob, Ends it on all sessions.
  • Dol-To-Me - Lord Bob, Jump - Tells everyone to get to the pad your toon is closest too.
    • For example: When he puts 1 pad acid, if your tank is NOT on it, hit the button, everyone will come to you (they jump). If your tank is ON the acid pad, jump to a different one and hit it.
  • 4
  • 5
  • 6

Objects

Ogremcp objects buttons.jpg

(Objects - Will have any button that controls objects commonly used out of combat. Such as repair gear, get/use the flag, hail, etc.)

  • Repair - Repair your guild if you are:
    • Near a Guild Mender
    • Near a Mender
    • Near a Mender bot
    • There are a few others that are hard coded in, like the one in VP etc. If you have any other spots you want coded in let me know.
  • Get Flag - If near a Guild Strategist will hail and get a flag.
  • Use Flag - If near a Guild Strategist will hail and send you to the rally point.
  • Call GH - Calls to your Guild Hall.
  • Call Home - Calls to your home.
  • ClsWdw - Close top window. This hits ESC on all your computers.
  • Fly-Up - Will hold/release "Home" (to fly up on a flying mount).
  • Fly-Dn - Will hold/release "End" (to fly Down on a flying mount).
  • Mount - Toggles mount.
  • 4
  • 5
  • 6
  • Zone - Clicks on most zones to instances.
  • Door 1 - When the option comes up of which zone to zone into, use this for option 1.
  • Door 2 - When the option comes up of which zone to zone into, use this for option 2.
  • Door X - When the option comes up of which zone to zone into, use this for option for an input box to enter which door number.
  • Special - Double click the nearest "Special" (as per radar) to everyone.
  • Run/Walk - Toggles run/walk
  • AReward - Accept Reward. When you finish a quest and the reward window pops up, this will accept it. Note: Make sure you can accept the reward, and it's not a choice reward.
  • Hail - Everyone will assist you, and hail your target
  • Opt 1-4 - While talking to an NPC (the bubble windows) everyone will do which conversation option as you press. Useful for shard quests.


Other Tab

Ogremcp other buttons.jpg

  • Profile - ...
  • Main - Toggles opens/minimized the "main" window of the bot.
  • Zone Rst - Allows you to reset instance timers. The Zones window must be open on the main character in order for this to work.
  • ResStone - Casts a res stone (works for all priests).
  • TellWd - If the tell window has been used, it re-opens it.
  • Jump - Sends a Jump command through the uplink.
  • 1
  • 2
  • 3
  • Disband - Drop group.
  • Auto Run - Toggle Auto run.
  • 6
  • Load Bot - Loads the bot.
  • Dev Bot - Loads the development version of the bot.
  • End Bot - Ends the bot.
  • Camp - Camps everyone to desktop.
  • 5
  • 6
  • Load EXT - Load ISXOGRE
  • Unload EXT - Unload ISXOGRE
  • List IPs - Lists all the computers in the uplink.
  • Connect - Connects to the computers listed in EQ2Chars.inc
  • Disco - Disconnects to the computers listed in EQ2Chars.inc
  • 6

List of commands

A - C

Command Parameter & Description
Apply_Verb
 Relay all the apply verb [Actor name] [case sensitive verb]
Note: This is an advanced button.
Parameter 1 Actor search string
Parameter 2 Who will change their assist..
AReward
 Accepts reward window.
Note: can only be done on rewards that have no loot choice.
Parameters N/A
Assist
 Sets assists from parameters.
Parameter 1 Person to assist.
Parameter 2 Who will change their assist..
AssistUI
 Sets assists from a pop up UI.
Parameters N/A
Assistx2
 Sets assists for two toons from parameters.
Parameter 1 and 3 Person to assist.
Parameter 2 and 4 Who will change their assist.
Assistx3
 Sets assists for three toons from parameters.
Parameter 1 and 3 Person to assist.
Parameter 2 and 4 Who will change their assist.
AutoRun
 Presses the auto run key.
Parameters N/A
Call_GH
 Calls to guild hall if not already in one.
Parameters N/A
Camp
 Night night time... Camp to desktop.
Parameters N/A
Cancel_Cast..
 Cancels current ability being cast then casts defined spell/ability
Note: Abilities must be base names. Kick will work. Kick III will not.
Parameter 1 Who should cast. Example All
Parameter 2 Spell to be cast.
Cancel_CastOn..
 Cancels current ability being cast then casts defined spell/ability on specified character
Note: Abilities must be base names. Kick will work. Kick III will not.
Parameter 1 Who should cast. Example All
Parameter 2 Spell to be cast.
Parameter 3 Cast spell on this person.
Cancel_Maintained
 Cancel Maintained ability
Parameter 1 Ability to cancel
Cast..
 Tells [Bots] to cast a specific [ability].
Note: Abilities must be base names. Kick will work. Kick III will not.
Parameter 1 Who should cast. Example All
Parameter 2 Spell to be cast.
CastOn..
 Tells [Bots] to cast a specific [ability] on specific toons.
Note: Abilities must be base names. Kick will work. Kick III will not.
Parameter 1 Who should cast. Example All
Parameter 2 Spell to be cast.
Parameter 3 Cast spell on this person.
CastOn..x2
 Tells [Bots] to cast a specific [ability] on specific toons.
Note: Abilities must be base names. Kick will work. Kick III will not.
Parameter 1 and 4 Who should cast. Example All
Parameter 2 and 5 Spell to be cast.
Parameter 3 and 6 Cast spell on this person.
Castx2..
 Tells [Bots] to cast a specific [ability].
Note: Abilities must be base names. Kick will work. Kick III will not.
Parameter 1 and 3 Who should cast. Example All
Parameter 2 and 4 Spell to be cast.
Change_Campspot
 Relays a change to active campspots.
Parameter 1 XCord
Parameter 2 YCord
Parameter 3 ZCord
ChangeCAListBoxItem
 Changes a list box item on the CA tab only.
Parameter 1 Who to change.
Parameter 2 Ability name.
Parameter 3 TRUE or FALSE (case sensitive).
ChangeCAListBoxItemx2
 Changes a list box item on the CA tab only.
Parameter 1 and 4 Who to change.
Parameter 2 and 5 Ability name.
Parameter 3 and 6 TRUE or FALSE (case sensitive).
ChangeCAListBoxItemx5
 Changes a list box item on the CA tab only.
Parameter 1, 4, 7, 10 and 13 Who to change.
Parameter 2, 5, 8, 11 and 14 Ability name.
Parameter 3, 6, 9, 12 and 15 TRUE or FALSE (case sensitive).
ChangeNamedCAListBoxItem
 Changes a list box item on the Named CA tab only.
Parameter 1 Who to change.
Parameter 2 Ability name.
Parameter 3 TRUE or FALSE (case sensitive).
ChangeNamedCAListBoxItemx2
 Changes a list box item on the Named CA tab only.
Parameter 1 and 4 Who to change.
Parameter 2 and 5 Ability name.
Parameter 3 and 6 TRUE or FALSE (case sensitive).
ChangeNamedCAListBoxItemx5
 Changes a list box item on the Named CA tab only.
Parameter 1, 4, 7, 10 and 13 Who to change.
Parameter 2, 5, 8, 11 and 14 Ability name.
Parameter 3, 6, 9, 12 and 15 TRUE or FALSE (case sensitive).
Change_Campspot_Who (x2, x3, x4)
 Changes campspot for specific toons.
For x2/x3/x4 just repeats itself
Parameter 1 ForWho
Example: All, melee, scouts, mages, fighters, dirge, etc.
Parameter 2 X coord
Parameter 3 Y coord
Parameter 4 Z coord
ChangePriorityListBoxItem
 Changes a list box item on the Priority tab only.
Parameter 1 Who to change.
Parameter 2 Ability name.
Parameter 3 TRUE or FALSE (case sensitive).
ChangePriorityListBoxItemx2
 Changes a list box item on the Priority tab only.
Parameter 1 and 4 Who to change.
Parameter 2 and 5 Ability name.
Parameter 3 and 6 TRUE or FALSE (case sensitive).
ChangePriorityListBoxItemx5
 Changes a list box item on the Priority tab only.
Parameter 1, 4, 7, 10 and 13 Who to change.
Parameter 2, 5, 8, 11 and 14 Ability name.
Parameter 3, 6, 9, 12 and 15 TRUE or FALSE (case sensitive).
CheckGear
 Reports gear conditions.
Parameters N/A
ClsWdw
 Close Window. Closes the top most window in the game.
Parameters N/A
CmpSpot
 Bring up the options for Campspot.
Parameters N/A
Come2Me
 Tells [Bots] to move to a specific [person].
Parameter 1 Person to move too.
Parameter 2 Who should move. Example All
Parameter 3 Precision. Default is 3.
Connect
 Connect to other computers that are in your eq2chars file.
Parameters N/A
CS-Dft
 Sets campspot. using default camp spot options
Parameter 1 Who will camp spot.
CS-JO-JI
 [C]amp[S]pot default (everyone). [J]oust [O]ff default (Mages and priests). [J]oust [I]n (melee)</Setting>
Parameter 1 Campspot for who</Setting>
Parameter 2 Who should joust off</Setting>

D - J

Command Parameter & Description
Dev_Bot
 Loads Development version of Ogre Bot.
Parameters N/A
Disband
 Disband Disband your group.
Parameters N/A
Discon
 Disconnect to other computers that are in your eq2chars file.
Parameters N/A
DM_Cancel
 Cancels the rating window for Dungeon Maker
Parameters N/A
Doljon_End
 Ends the Lord Doljon script.
Parameters N/A
Doljon_Ld
 Loads the Lord Doljon script.
Parameters N/A
Dol-To-Me
 Lord Doljon Move to me command.
Parameters N/A
Door
 When zoning and you have the option to select which zone this will select the one you use as a parameter.
Note: curently not working
Parameter 1 option to choose.
DoorX
 When zoning and you have the option to select which zone this will bring up door ui and allow you to select the one you use as a parameter.
Note: curently not working
Parameters N/A
DoV_RaidDebuff
 Casts the raid debuff
Parameter 1 Who to cast.
Parameter 2 ID or name of who to cast the debuff on.
Note: If you use ALL - everyone will cast it.
End_Bot
 Ends Ogre Bot. Works on any version of Ogrebot [Release or development build].
Parameters N/A
End_Script_Relay
 Ends a script
Parameter 1 script to end
Evac
 Anyone with an evacuate ability will use it.
Parameters N/A
ExecuteAtom
 Relays an OgreBotAtom...
Parameter 1 ForWho
Parameter 2 AtomName
Parameter 3-11 Params
F-Follow
 Does a Force follow as per what is set in OgreBot.
Parameters N/A
Fly-Dn
 Presses or releases the fly down [or swim down] button.
Note: Will continue until pressed again. Think of it as autorun for flying (or swimming)up/down
Parameters N/A
Fly-Up
 Presses or releases the fly up [or swim up] button.
Note: Will continue until pressed again. Think of it as autorun for flying (or swimming)up/down
Parameters N/A
Get_Flag
 Gets a flag from a guild strategist.
Parameters N/A
Hail
 Everyone will assist you and hail your target.
Parameters N/A
HoldUp
 This button turns auto follow off.
Parameter 1 Command for who? Default All
Imm-Res
 Uses Cleric AA Immaculate Revival if X people are dead.
Note: Will always cast if a priest or fighter is dead.
Parameter 1 Threshold of how many currently dead before casting.
ItemDB
 Loads Ogre Item Database.
Which is used to help keep track of who has what item.
Note: This is in Early Development still.
Parameters N/A
Jst-In
 Joust In.
When campspot is turned on you will joust In (if permitted).
Parameter 1 Command for who? Default All
Jst-In-Who
 Joust In.
When campspot is turned on you will joust In (if permitted).
Parameter 1 Who will Joust In
Jst-Off
 Joust Off.
Brings up input box to tell certain classes or people they are not permitted to joust in.
Parameters N/A
Jst-Off-Who
 Same as Jst-Off, but takes a parameter.
Parameter 1 Who will not joust in on command.
Jst-On
 Opposite of Jst-Off - reverses the effects of Jst-Off. DOES NOT JOUST IN.
Parameters N/A
Jst-On-Who
 Same as Jst-On, but takes a parameter.
Parameter 1 Who will have joust in enabled when commanded.
Jst-Out
 Joust Out.
When campspot is turned on you will joust out (if permitted).
Parameter 1 Command for who? Default All
Jst-Out-Who
 Joust Out.
When campspot is turned on you will joust out (if permitted).
Parameter 1 Who will Joust out
Jump
 Sends jump key to all clents
Parameters N/A

L - P

Command Parameter & Description
LetsGo
 This button removes movement restrictions such as HoldUp and campspot.
Parameter1 Command for who? Default All
List_IPs
 List any computers connected via the uplink.
Parameters N/A
LoadAutoTargetListForWho
 Loads an AutoTarget List for a specific toon
Parameter 1 List to load.
Parameter 2 Who should load the list.
Load_Bot
 Loads Ogre Bot.
Parameters N/A
Load_Ext
 Loads ISXOgre.
Parameters N/A
Main
 Toggles the main window. Same as pressing Show Main or Hide Main.
Parameters N/A
Mentor
 Accepts 1 parameter, toonname to mentor.
Parameters N/A
Mount
 Clicks the mount ability. If you have a mount it will cancel it. If you do not have a mount it will summon it.
Parameters N/A
Move2Area
 Tells [Bots] to move to a specific [person].
Parameter 1 XCord
Parameter 2 YCord.
Parameter 3 Who should move. Example All
Parameter 4 Precision. Default is 3.
NoMove
 Prevents incombat movement such as move into melee range and move behind.
Note:Use LetsGo to clear the NoMove flag.
Parameters N/A
NoTarget
 Clears everyones target.
Parameters N/A
OFol---
 Decreases the distance of OgreFollow.
Parameters N/A
OFol-++
 Increases the distance of OgreFollow.
Parameters N/A
OFol-Dft
 Ogre Follow using default settings (no input box).
Parameter1 Who Should Follow
Parameter2 Who to follow
Parameter3 Min Distance. Default 8
Parameter4 Max Distance. Default 100
Parameter5 Break on follow. Default FALSE
OFollow
 Brings up the input box options for OgreFollow.
Parameters N/A
Ogre_Command
 Local ogre command...
Parameter 1 ogre command
Parameter 2 to 11 Parameters
Ogre_CommandRelay
 relay all ogre command...
Parameter 1 ogre command
Parameter 2 to 11 Parameters
OgreBotAtom
 Executes an atom if Ogrebot is loaded.
Note: Does NOT relay the command.
Parameter 1 atom name. Case sensitive.
Parameter 2-11 Parameters
OgreBotAtomRelay
 Executes an atom if Ogrebot is loaded.
Note: Does relay the command.
Parameter 1 atom name. Case sensitive.
Parameter 2-11 Parameters
OgreIRC
 Sends a message or command to OgreIRC
Parameter 1 to 100 OgreIRC Commands and paramters
Opt_Num
 After hailing you can use this to converse with an NPC.
Parameter 1 chat option to choose.
Pause
 Pauses all the bots.
Parameters N/A
Pet_Off
 Everyone does a pet back off command.
Parameters N/A
Portal_To_Guild
 Relays to use Magic Door to Guild Hall
Parameters N/A
Profile
 Loads a profile from a pop up UI.
Parameters N/A

R - Z

  • RawCommand
    • Executes in the console
      • parameter 1 - 11
    • Example that would load ogre idol
      • Parameter 1 = ogre
      • Parameter 2 = idol
    • Note: It will pass 10 parameters. NULL for any not filled in. This must be handled by the script.


  • RelayRunScript
    • relay all - Runs a script.
      • parameter 1 = relay too: [All - All Other - IS1]
      • Parameter 2 = Scriptname
      • Parameter 3-12 = Parameters for script
      • Note: It will pass 10 parameters. NULL for any not filled in. This must be handled by the script.


  • ReLd_Bot
    • Reloads Ogre Bot.


  • Repair
    • Uses a repairer or repair bot.


  • Res
    • Removes the temporary [Stop Res] flag.


  • ResStone
    • All priests will cast their resurrection stone..


  • Resume
    • Resumes all the bots.


  • Revive
    • First and foremost - stop dying.
    • This button presses the revive button.
      • WARNING It does NOT take your selection into consideration. It seems to choose the one the game would choose by default.


  • Run_Walk
    • Toggles run.


  • RunScript
    • Runs a script (no relay).
      • parameter 1 = Scriptname
      • Parameter 2-11 = Parameters for script
      • Note: It will pass 10 parameters. NULL for any not filled in. This must be handled by the script.


  • Special
    • Clicks the nearest special.


  • StopRes
    • Sets a temporary Stop Res.


  • Target___
    • Relays an OgreBotAtom...
      • parameter 1 = ForWho

<Setting Name="two2">Parameter 2 = Target Name

      • Partial search string. Special 'me' can be used to specify the person.


  • Target___x2
    • Relays an OgreBotAtom...
      • parameter 1 and 3 = ForWho
      • Parameter 2 and 4 = Target Name
    • Note:Partial search string. Special 'me' can be used to specify the person.


  • TellWD
    • Shows the tell window if you have received a tell and closed the window down.


  • Test
    • Button for Kannkor to test things.


  • Trak-HUD
    • Displays or removes the Trakanon HUD.
    • Display 1 = Distance from Orb
      • Display 2 = Nearest PC and distance


  • Turt-HUD
    • Displays or removes the Turtles HUD [for the Tert raid encounter in Kraytoc].
    • Display 1 = Right - Health - Distance
      • Display 2 = Left - Health - Distance


  • Unload_Ext
    • Unloads ISXOgre.


  • Unmentor
    • Unmentors everyone.


  • Uplinkoption_change
    • Changes a checkbox to checked (TRUE) or unchecked (FALSE)
      • param 1 = For who
      • Param 2 = Name of object to change (obtained via xml files - path to your \InnerSpace\Scripts\EQ2OgreBot\UplinkControllerXML.xml)
      • Param 3 = Value to change to. Note: TRUE is not the same as true.
  • Example:
    • This will turn on Ignore NPC HP 100% for everyone
      • param 1 = All
      • Param 2 = checkbox_settings_ignoretargettoattackhealthcheck
      • Param 3 = TRUE


  • Uplinkoption_changex2
    • Changes a UI option
      • param 1 and 4 = For who
      • Param 2 and 5 = Name of object to change (obtained via xml files - path to your \InnerSpace\Scripts\EQ2OgreBot\UplinkControllerXML.xml)
      • Param 3 and 6 = Value to change to. Note: TRUE is not the same as true.


  • Uplinkoption_changex6
    • Changes a UI option
      • params 1-4-7-10-13-16 = For who
      • Param 2-5-8-11-14-17 = Name of object to change (obtained via xml files)
      • Param 3-6-9-12-15-18 = Value to change to. Note: TRUE is not the same as true.


  • Use_Flag
    • Uses a flag from a guild strategist.


  • UseItem..
    • Tells [Bots] to Use a specific [Item].
    • Checks equipped gear first, then inventory.
      • parameter 1 = Who should use. Example All
      • Parameter 2 = Item to be used.
      • Note - Item names must be exact.


  • UseItemOn..
    • Tells [Bots] to Use a specific [Item].
    • Checks equipped gear first, then inventory.
      • parameter 1 = Who should use. Example All
      • Parameter 2 = Item to be used.
      • Parameter 3 = Use item on this person.
      • Note - Item names must be exact.


  • WarMyth
    • Toggles Warlock Mythical ability.


  • Zone
    • Will attempt to zone you.


  • Zone_Rst
    • Loads Ogre zone resetter.


MCP Customization and You

The out of the box settings work for a majority of users. Most people, if they need to make changes will only add and remove buttons. Before making any file changes make sure you backup and understand the changes you are making.

Files

MCP Files

  • bak.MCPCommandsCustom.xml
    • Backup source of MCP Custom command file. Used for patch purposes
  • LoadOgreMCP.iss
    • MCP Script. Do not screw with it if you know whats good for you.
  • MCPCommands.xml
    • The complete default command list and parameters of MCP.
    • DO NOT make changes to this file. Use the MCPCommandsCustom.xml file to add any changes you may wish.
  • MCPCommandsCustom.xml
    • MCP Custom command file. Use this file to add any functionality to your MCP buttons.
    • Consult the MCPCommands.xml file for file structure.
  • MCPCustomSettings.xml
    • edit to make manual button and layout changes
  • MCPDefaultSettings.xml
    • source file for MCP button layout. Make all changes to MCCPustomSettings.xml not this file

Functions

Examples

Adding an uplink radio button toggle

Mcpedit.png

Let's say we want to change our brigand named Robin from sitting behind the mob to move to the front for one of his special abilities using a nice simple button rather than getting all clicky.

1st right click the MCP button.

Select Uplinkoption_change in the drop down list to the right of select command.

In the text box type a name for your button.

In the additional parameter section first add the person this button apply to, Robin in this case, but you can also specify all, melee, mage or any of the other general categories

Next add the parameter that will be changing.

If you dont know what the option is you need to change you have a couple methods of finding out open UplinkcontrollerXML.xml in your text editor.

Use the search function or scroll though the file to find the text of the option, in this case Move in Front of mob. 

<checkbox name='checkbox_settings_moveinfront' template='chkbox'>
  <X>165</X>
  <Y>110</Y>
  <Text>Move In Front of mob</Text>{highlight}
  <OnLeftClick>
    This:RightClick
    This.Parent.FindChild[ChkBoxMoveBehindID]:UnsetChecked
    This.Parent.FindChild[ChkBoxMoveBehindID]:RightClick
 </OnLeftClick>
  <OnRightClick>
    relay all "Script[\${OgreBotScriptName}]:QueueCommand[call UplinkControllerFunction ${This.Type} checkbox_settings_moveinfront ${This.Checked}]"
  </OnRightClick>
</checkbox>

Notice you should have come up on the 4th line of this snippet of code.

On the first line of code you see name='checkbox_settings_moveinfront', this gives us the correct name of the option we want to change, checkbox_settings_moveinfront.

Alternately you can look in the OgreUIXML.xml

Use the search function(recomended) or scroll though the file to find the text of the option, in this case Move in Front of mob. 

<checkbox name='checkbox_settings_moveinfront' template='EQ2OB_Checkbox_Settings'>
    <Text>Move in front of mob</Text>
    <OnLeftClick>
       TabConfig.Settings:ChangeSettingDetailsFromUI[${This.Name}]
       if ${This.Checked} && ${UIElement[${OBUI_checkbox_settings_movebehind}].Checked}
       UIElement[${OBUI_checkbox_settings_movebehind}]:LeftClick
    </OnLeftClick>
</checkbox>

Lastly set the value to TRUE(case matters) and of course to commit the changes hit apply

Adding more buttons

On the MCP click the setup button up on the top above the mcp buttons this will bring up the Edit MCP settings UI.

The key numbers to know here are the button height and width and the spacing height and width.

Lets say that we want to add another column to the page frames. We simply add the button width and the button width spacing together (54) and add that to the Width value at a minimum. I would suggest for aesthetic reason adding in between one and a half the button spacing value and twice the value.

MCPEditSetting.png

adjusting static frame buttons

On the MCP click the setup button up on the top above the mcp buttons this will bring up the Edit MCP settings UI. To add more static frame buttons or less simply adjust the width of Static Frame Width by the value of the button width. Remember to increase the witch of the MCP to compensate for the increase in the static frame width.

Keep in mind that column 1 of the static frame is hard coded to switch pages of the frames.

MCPEditSetting.png

Retrieved from "https://wiki.ogregaming.com/eq2/index.php?title=OgreMCP&oldid=5949"