OgreMCP
From ISXOgre
OgreMCP
Tab Summary
Note: OgreMCP is currently named "Uplink". It will be renamed in the near future to "OgreMCP".
MCP = Master Control Panel. OgreMCP is used to pass commands via the uplink. To load OgreMCP, type "Run ogre MCP" and a new window appears.
Note: Nearly all of these buttons are sending commands through the uplink, and will affect ALL sessions connected.
Main Buttons (Left side)
- There are 4 "Tabs". Clicking each of these changes which buttons appear.
- General (default)
- Zones 1
- Other
- Other2
- There are 6 static buttons. These never disappear, regardless of which "tab" you are on.
- Lets go - Defaulted on when the bot loads. This is used to remove the following flags: Hold up, No move, Do not move, Camp spot, Fiegn death. You can also use a chat command of "lets go" in a tell/group/raid to activate this command. -Queued command. Happens when the bot finishes what it is doing.
- Hold up - Turns OFF auto follow. -Forced command. This happens immediately, regardless if the bot is doing other things.
- Pause - Presses the "pause" button on the bot.
- Resume - Resumes the bot (counter to Pausing it).
- Uplink - Uplink Controller New window (not yet released)
- Profile - Input box to allow you to load a new profile. Example: Grind would load a grind profile if it exists. If it doesn't exist, does nothing.
General Tab
- Sanct - Sanctuary - Queues up the spell Sanctuary for templars (if it's ready).
- DivineR - Casts Divine Recovery if it's available (Cleric AA).
- Cls-Buff - Casts a class specific buff. These need to be hard coded in, currently the only one in the list, is Warlock's "Focus Casting".
- CmpSpot - Forces people to stay within a certain distance of a pre-designed spot. (Useful for knockbacks etc).
- Input box #1 - Camp spot for who? - Who will be listening to this command. Default is all.
- Input box #2 - Distance - Min distance <space> max distance.
- Min distance - How close do you stay to this spot. Default is 2 (almost right on top of it).
- Max distance - Only move to this distance if you are within this close to it (don't need any zone-wide running). Default is 75, which is quite far away.
- BDance - Makes you break dance.. err.. Will cast Blade Dance if it is available (Bard AA).
- Get Flag - If you are near a Flag merchant (Guild Strategist) and do NOT have a flag, they will get a flag.
- Use Flag - If you are near a Flag merchant (Guild Strategist) they will use the flag.
- Call GH - Call to Guild Hall if your call is up, and you're not already in a guild hall.
- Revive - Revive - WARNING! If there are multiple options, it does NOT choose the one you have highlighted. I haven't spent the time to determine which one it does.
- Repair - Repair your guild if you are:
- Near a Guild Mender
- Near a Mender
- Near a Mender bot
- There are a few others that are hard coded in, like the one in VP etc. If you have any other spots you want coded in let me know.
- Res - Counter to "Stop Res" below. Turns Resing on ONLY if it was turned off via Stop Res.
- Stop Res - Temporarly turns resing off. Use "Res" to re-enable.
- Assist - "Dynamic Assist" - Change assists on-the-fly. Note: Auto assist MUST be checked or this option does nothing.
- Input box #1: Who should be assisting? Who will listen to this command.
- Input box #2: Who do you want to assist?
- Example usage: Input box#1: Mages, Input Box #2: Kannkor. This would make all mages assist Kannkor. I could then do: Input Box#1: Melee, Input box #2: Roknnak. All melee would be assisting Roknnak (while all casters are still assisting Kannkor).
- NOTE putting a blank option in Input Box #2 clears this option for EVERYONE.
- WarMyth - Warlock Myth toggle.
- Test - Test used by Kannkor. You can ignore this (just runs a test file that you don't have).
- NoMove - "Do not move" - temporarily disables move into melee range, move behind, and auto follow. Use "Lets go" to clear.
- No Target - Clears your target. Useful to stop many various movements.
Zones 1 Tab
- Run X - Raid script for Kannkor.
- Exeter - When fighting Maldonous (sp?) Exeter in Palace of Ferzhul, every 20% all 6 people in the group must click the flames. This does that for you. Click once every time he goes away.
- Reset Z - Hmm.. not sure. Was a raid script that I think got removed.
- Trak HD - On-screen HUD that puts the name/distance of the closest PC and closest special to you. I use it when I kill Trak.
- Trak Off - Turns the Trak HD (HUD) off.
- Chel Orb - Doesn't work.. For trak.. I should probably fix it or remove it.
Other Tab
- Invite - Runs an invite script for Kannkor... has to be coded into invite.iss.
- Invite-R - Runs an invite script for Kannkor... has to be coded into invite.iss.
- ClsWdw - Close top window. This hits ESC on all your computers.
- Evac - If you can cast evac, you will.
- GHZone - The idea was it would zone you into your guild hall, but it currently only clicks on the GH door. You still have to "Enter".
- Zone - Clicks on most zones to instances.
- Door 1 - When the option comes up of which zone to zone into, use this for option 1.
- Door 2 - When the option comes up of which zone to zone into, use this for option 2.
- Door X - When the option comes up of which zone to zone into, use this for option for an input box to enter which door number.
- AReward - Accept Reward. When you finish a quest and the reward window pops up, this will accept it. Note: Make sure you can accept the reward, and it's not a choice reward.
- Special - Double click the nearest "Special" (as per radar) to everyone.
- Harvest - Doesn't work...
- Run/Walk - Toggles run/walk
- Crouch - Toggles Crouching
- Hail - Everyone will assist you, and hail your target
- Opt 1-4 - While talking to an NPC (the bubble windows) everyone will do which conversation option as you press. Useful for shard quests.
Other2 Tab
- TellWd - If the tell window has been used, it re-opens it.
- ResStone - Casts a res stone (works for all priests)
- Main - Toggles opens/minimized the "main" window of the bot.
- End - Ends the bot
- Load UI - Loads the bot.
- Camp - Camps everyone to desktop
- List IPs - Lists all the computers in the uplink.
- Connect - Connects to the computers listed in EQ2Chars.inc
- Disco - Disconnects to the computers listed in EQ2Chars.inc
User notes/comments/suggestions:
